ADLER Fan 15 cm – desk User Manual
- June 6, 2024
- ADLER
Table of Contents
AD 7301, AD 7302, AD 7303
AD 7304, AD 7305, AD 7317
1. AD7303 / AD7304 3. AD7301 / AD7317
4. AD7302 2. AD7305
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240 V ~ 50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let cord hang over edge of counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
Protect the motor part of the unit from immersion in water.
-
Use only the original mounting hardware provided.
-
Switch on the device only after complete installation. The partially assembled and commissioned device does not ensure safe use and proper operation.
CAUTION: DO NOT TURN ON THE FAN WITHOUT FRONT AND REAR COVERS. -
Set up the fan away from curtains, curtains, or other objects that may be pulled in by the working fan.
-
Do not insert any objects into the cover of the fan. Otherwise it may lead to personal injury or damage to the device.
DESCRIPTION OF THE DEVICE (IMAGE 1 – AD7301, AD7302, AD7303, AD7304, IMAGE 2 AD7305, IMAGE 3 – AD7317)
- Front guard
- Blade nut
- Blade
- Rear guard nut
- Rear guard
- Motor unit
- Motor head lock
- Power cord
- Control panel
- Control panel housing
- Mounting screw
- Interior barrel
- Height adjustment
- Exterior barrel
- Base guard
- Base
- Clip
- Fastening nut
FAN ASSEMBLY
-
Make sure that the power cord is disconnected from the electrical socket.
For model AD7317:
– mount the base (16) or the clip (17) with the fastening screw (11) and the nut (18) – according to figure 3.
For model: 7305 model:
– assemble the fan base (15, 16) and attach the exterior barrel (14).
– attach the exterior barrel to the control panel housing (10) using the mounting screw (11)
For all models: -
Attach the rear guard (5) to the motor unit (6) using the nut (4).
-
Place the fan blade (3) on rotor axis. Fasten with the blade nut (2). Check to make sure that the blade rotates without resistance.
-
Attach the front guard (1) to the rear guard (5) using the hinge clamps on the outside of the front guard.
USING THE DEVICE
- Press the ‘0’ button on the control panel (9), then plug the power cord into an electrical socket.
- Turn the fan on by pressing button ‘1’ or ‘2’ (AD7301, AD7302, AD7317)) or ‘1’, ‘2’ or ‘3’ (AD7303, AD7304, AD7305). After a few seconds the fan blades will begin to rotate at the maximum speed of the selected gear
- To turn on the oscillating motion of the fan unit (horizontal) press the motor head lock button (7). Pulling the button upwards will turn the oscillation off (horizontal).
- You can adjust the fan’s vertical angle by tilting the fan unit.
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan’s motor part or any buttons to get wet.
- Before cleaning remove the plug from the electrical socket.
- To clean dust from the fan blades, remove the front guard. Remove the fan blade from the rotor axis, wipe with a damp cloth, then wipe dry.
- To clean the motor unit gently wipe it with a damp cloth, without detergents. Wipe dry.
- Store the fan in a dry place.
Technical Data:
Item number / Diameter / Power / Power max: Voltage
AD7301 / 15 cm / 15W / 30W / 220-240V ~ 50 / 60Hz
AD7302 / 23 cm / 22W / 45W / 220-240V ~ 50 / 60Hz
AD7303 / 30 cm / 35W / 70W / 220-240V ~ 50 / 60Hz
AD7304 / 40 cm / 45W / 90W / 220-240V ~ 50 / 60Hz
AD7305 / 40 cm / 45W / 90W / 220-240V ~ 50 / 60Hz
AD7317 / 15 cm / 15W / 30W / 220-240V ~ 50 / 60Hz
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
Electric Kettle Espresso Machine Standing Fan
AD 02 AD 4404 AD 7305
Sandwitch maker Heater Fan Oil Heater
AD 3015 AD 77 AD 7808
Hair Clipper Hair Clipper Dripp Coffee Maker
AD 2823 AD 2825 AD 4407
Kettle Hair Dryer Hair Clipper
AD 1286 AD 2252 AD 2832
Hair Shaver Kitchen Scale Nut Cookie Maker
AD 2932 AD 8121 AD 3039
Blender Electric Kettle Electric heating pad
AD 4076 AD 1225 AD 7415
Desktop fan Waffle Maker Mini washing machine with spinning function
AD 7303 AD 3036 AD 8051
Desk fan 15 cm with clip Quartz Heater Food dryer
AD 7317 AD 7709 AD 6654
Bluetooth Speaker Water Kettle 1,0L Steam Iron
AD 1169 AD 1283 AD 5032
Electric Oven With HOB Bending steam mop Tower Fan
AD 6020 AD 7038 AD 7319
Fan Heater Air Conditioner
AD 7717 AD 7916
Documents / Resources
|
ADLER Fan 15 cm -
desk
[pdf] User Manual
AD 7301, AD 7302, AD 7303, AD 7304, AD 7305, AD 7317, Fan 15 cm - desk
---|---