VonHaus 3500166 E-Series 18V Cordless Drill Driver Body Instruction Manual
- October 27, 2023
- vonhaus
Table of Contents
E-Series 18V Cordless Drill Driver Body
Instruction Manual
E-Series 18V Cordless Drill Driver Body
** Please read all instructions carefully before use and retain for future
reference.
CAUTION Do not immerse in water.
Do not use outdoors.
** Protect your eyes.
Protect your ears.
** Protect your hands.
Protective clothing must be worn
PRODUCT DISPOSAL INFORMATION** For electrical products sold within the
European Community, at the end of the electrical product’s useful life, it
should not be disposed of with household waste. Please recycle where
facilities exist. Contact your local authority for details of collection
schemes in your area.
In all circumstances:
Do not dispose of in domestic waste.
Do not incinerate.
Do not abandon in the environment.
Do not dispose of WEEE as unsorted municipal waste.
Please read all instructions carefully before use and retain for future
reference.
INTENDED USE
Only operate the power tool/machine for its intended purpose and within the
parameters specified in this manual. This power tool/machine is for domestic
use only. Do not use outdoors or on wet surfaces. This power tool/machine is
not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless supervised or given
appropriate instruction concerning the product’s use by a person responsible
for their safety.
GENERAL PRECAUTION
Do not allow to be used as a toy. Children should be supervised to ensure they
do not play with the power tool/machine. If the power tool/machine is not
functioning properly, has been dropped, damaged, left outdoors, or immersed in
liquid, do not use, contact DOMU Brands Customer Services. Do not use the
power tool/machine if any parts appear to be faulty, missing or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded. Prevent unintentional starting. Ensure the switch
is in the off position before connecting to the power source and/ or battery
pack, picking up or carrying the tool. Carrying power tools with your finger
on the switch, or energizing power tools that are switched on, invites
accidents. Do not operate power tools in explosive atmospheres such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes. Always wear eye protection. Any power tool can
throw foreign objects into your eyes and cause permanent eye damage. Always
wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1.
Every day glasses have only impact resistant lenses. Do not expose power tools
to rain or wet conditions. Water entering the power tools will increase the
risk of electric shock. Stay alert, watch what you are doing and use common
sense when operating a power tool/machine.
Do not use a power tool/machine while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power
tool/machine may result in serious personal injury. Use personal protective
equipment. Always wear eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries. Prevent unintentional starting.
Ensure the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Carrying power
tool/machine with your finger on the switch or energizing power tool/machine
that have the switch on invites accidents. Remove any adjusting key or spanner
before turning the power tool/machine on. A spanner or a key left attached to
a rotating part of the power tool/machine may result in personal injury. Do
not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool/ machine in unexpected situations. Dress
appropriately. Do not wear loose clothing or jeweler. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jeweler or long hair can be
caught in moving parts. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tool/machine in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tool/machine create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE
Do not force the power tool/machine. Use the correct power tool/machine for
your application. The correct power tool/machine will do the job better and
safer at the rate for which it was designed. Do not use the power tool/machine
if the switch does not turn it on and off. Any power tool/machine that cannot
be controlled with the switch is dangerous and must be repaired. Disconnect
the plug from the power source and/or the battery pack from the power
tool/machine before making any adjustments, changing accessories, or storing
power tool/machine tools. Such preventive safety measures reduce the risk of
starting the power tool/machine accidentally. Store idle power tool/machine
out of the reach of children and do not allow persons unfamiliar with the
power tool/ machine or these instructions to operate the power tool/ machine.
Power tool/machines are dangerous in the hands of untrained users. Maintain
power tool/machines. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power
tool/machines operation. If damaged, have the power tool/machines repaired
before use. Many accidents are caused by poorly maintained power
tool/machines. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control. Use the power tool/machine accessories and tool bits in accordance
with these instructions, take into account the working conditions and the work
to be performed. Use of the power tool/machine for operations different from
those intended could result in a hazardous situation.
CLEANING & MAINTENANCE
Never soak or immerse electrical components and or a component that has a plug
attached. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing. Such preventive safety measures
reduce the risk of starting the power tool accidentally. Ensure the motor has
fully stopped before cleaning, clearing a blockage, checking, or carrying out
any maintenance on the tool. Maintain your power tool. Check for misalignment
or binding of moving parts, breakage of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool repaired by
a qualified repair person before use. Many accidents are caused by poorly
maintained power tools. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less likely tobind and
are easier to control. Regularly check external nuts and fixings to ensure
vibration caused by normal use has not begun to loosen them. Store idle power
tools out of reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the Breaker. Locate the power tool
out of reach of children, in a dry, locked unit. Make sure that the cord is
located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress. Remove the plug from the mains socket / battery
(where applicable) before carrying out any adjustment or maintenance. Always
store the power tool/machine in a dry place. If the power cord is damaged, it
must be replaced by a qualified service technician. Keep the ventilation slots
and motor housing as free of dirt and dust as possible (where applicable).
Clean the power tool/machine by rubbing it with a clean cloth and blow it
clean using low-pressure compressed air is recommended. Ensure you have all
the pieces listed. If you are missing any components, contact our customer
services department at hello@domu.co.uk (UK/EU)
usasuport@domubrands.com (US).
DO NOT proceed with assembly if any components are missing.
DRILLS
The drill must be secured. The work-piece must be clamped or secured to the
workpiece support. Do not drill pieces that are too small to be clamped
securely. Do not wear gloves. Keep your hands out of the drilling area while
the tool is running. Make sure the accessory is rotating before feeding into
the work-piece. When the accessory is jammed, stop applying downward pressure
and switch off the tool. Investigate and take corrective actions to eliminate
the cause of the jam. Avoid generating long chips by regularly interrupting
downward pressure. Never remove chips from the drilling area while the tool is
running, To remove chips, move the accessory away from the work-piece, switch
off the tool and wait for the accessory to stop moving. Use tools such as
brush or hook to remove chips. Accessories with speed ratings must be rated at
least equal to the maximum speed marked on the power tool.
TECHNICAL SPECIFICATION
Tool Rating: 18V
DECLARATION OF CONFORMITY
DOMU Brands Ltd
Declare under our sole responsibility the product:
3500166
Description
E-Series 18V Cordless Drill Driver Body
Complies with the essential requirements of the following directives:
2006/42/EC,2014/30/EU,2011/65/EU
And the Standards
EN 62841-1:2015+AC:15, EN 62841-2-1:2018, EN 55014 -1:2017, EN 55014-2:2015
Authorised Signatory on behalf of DOMU Brands Ltd.
COMPONENTS
- Keyless Chuck
- Torque Adjustment Collar
- Gearbox Speed Selector
- Direction Control Switch (Forward/Reverse/Lock)
- LED Work Light
- Variable Speed Trigger
- Grip Handle
- Belt Clip
OPERATION
| 
---|---
- Low Speed = This will slow the speed but provided more power and torque, and is therefore useful for high power.
- High Speed = This will increase speed but provide less power and torque.
| 
---|---
The Torque should be set dependent on the type material and length and type of
screw:
1-5: Small Screws
6-10: Soft Materials
7-19: Soft/Hard Materials
Heavy Drilling.
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for
recycling advice.
CUSTOMER SERVICE
If you are having difficulty using this product and require support, please
contact hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
WARRANTY To register your product and find out if you qualify for a free
extended warranty please go to www.vonhaus.com/warranty. Please retain a proof
of purchase receipt or statement as proof of the purchase date. The warranty
only applies if the product is used solely in the manner indicated in the
warnings page of this manual, and all other instructions have been followed
accurately. Any abuse of the product or the manner in which it is used will
invalidate the warranty. Returned goods will not be accepted unless re-
packaged in its original packaging and accompanied by a relevant and completed
returns form. This does not affect your statutory rights. No rights are given
under this warranty to a person acquiring the appliance second-hand or for
commercial or communal use.
COPYRIGHT All material in this instruction manual are copyrighted by DOMU
Brands. Any unauthorised use may violate worldwide copyright, trademark, and
other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
at hello@domu.co.uk (UK/EU)
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW.
References
- VonHaus | The Home of Furniture, Garden & DIY | VonHaus
- Home - Domu Brands
- VonHaus | The Home of Furniture, Garden & DIY | VonHaus
- Find information on our 2 year warranty policy | VonHaus
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>