Aranet Pro Base Station 12 User Guide
- June 6, 2024
- Aranet
Table of Contents
Aranet Pro Base Station 12
CHECK THE CONTENTS OF THE BOX
ATTACH THE DEVICE TO THE MOUNT
CONNECT POWER TO THE DEVICE
TURN THE DEVICE ON
CONNECT TO THE DEVICE
CONFIGURE THE DEVICE
- Change your password, modify and add users in the Users setting section.
- Set the device time in the System > Time setting section.
- Scan the availability of the radio channel in the Sensors > Radio setting section.
- Pair your sensors by pressing the Add sensor button in the Sensors > Sensors setting section.
- Enter the Notifications setting section, to configure your e-mail notifications.
ADDITIONAL RESOURCES
Please refer to the Aranet PRO User Guide for detailed instructions:
https://aranet.com/product/aranet-pro/#documentation
To view Terms&Conditions visit: https://aranet.com/terms-and-conditions/
To view Returns&Guarantees visit: https://aranet.com/returns-guarantees/
To fill RMA form visit: https://aranet.com/rma/
The information presented in this guide is the property of SAF Tehnika, JSC.
No part of this document may be reproduced or transmitted without proper
permission from SAF Tehnika, JSC.
The specifications or information contained in this document are subject to
change without notice due to continuing introduction of design improvements.
If there is any conflict between this document and compliance statements, the
latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this document or
damages of any kind that result from the use of this document.
To get up to date information about accessories and their availability, please
contact sales representative.
Copyright © 2021 SAF Tehnika, JSC. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>