Handy Cordless Li-Ion Handheld Trimmer Kit Instruction Manual
- June 6, 2024
- Handy
Table of Contents
OPERATOR’S MANUAL AND PARTS LIST CORDLESS LI-ION HANDHELD TRIMMER KIT THHSWH
Sales & Helpline 01793 333220
www.thehandy.co.uk
Before use please read & understand this manual, paying particular
attention to the safety instructions.
MAJOR PARTS
- ON/OFF switch
- Lock button for rear handle
- Press button
- Power indication light
- Wheel
- Grass trimmer blade
- Rotary joint
- Hedge trimmer blade
- Extension handle
- Adjusting knob of the extension handle
- on/off switch on an extension handle
- Socket for the plug of the extension handle
SPECIFICATIONS
Type/Model
|
THHSWH
---|---
Rated Voltage| 3.6V d.c.
No-load speed| 1000 revs/min
Hedge Trimmer| Cutting length: 120mm
Cutting width: 8mm max
Grass Shear| Cutting width: 80mm
Sound Pressure Level| 67 dB(A)
Sound Power Level| 87 dB(A)
Vibration| 0.977m/s²
Battery Charger| Input: 100-240V~50/60Hz
Output: 4.2V d.c.
Charging Time| Approximately 5 hours
Rechargeable Battery Type| 3.6V d.c. Li-ion 1.3Ah
SAFETY INSTRUCTIONS AND PREPARATION
Read and understand the owner’s manual and labels affixed to the handheld trimmer. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for reference.
- Keep children and pets away from the product at all times and do NOT operate near underground electric cables, telephone lines, pipes or hoses.
- Look out for foreign objects and debris on the grass such as rocks, wire, etc. If an immovable object jams the blade, switch it off before attempting to remove it.
- Dress appropriately – do NOT wear loose clothing, ties, jewelry, or anything that could be caught in the moving blades. Use of gloves and eye protection is advised.
- Do NOT operate the garden shears whilst under the influence of drugs alcohol or any medication that could affect your ability to use the apparatus correctly.
- Do NOT use the machine in the rain and do NOT leave it outside overnight. Try to prevent it from getting wet or being exposed to humidity.
- Do not force the shears to cut thicker growth than is recommended.
- Store out of reach of children and do not allow persons unfamiliar with the product or these instructions to operate the tool.
- Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the operation.
- Only recharge the garden shears with the charger supplied and ensure that it is connected to the correct socket.
- When the battery pack is not in use keep it away from other metal objects that can make a contact from one terminal to another. The switching mechanisms should
NOT be removed, bypassed, or tampered with.
When using the hedge trimmer attachment: Keep all parts of the body away from
the cutter blade. Do NOT remove cut material or hold material to be cut when
the blades are moving. Ensure the switch is off when removing jammed material.
When transporting or storing the product always fit the cover to the blade.
This product is designed for maintaining lawn edges of small areas of lawn in private residences. It should not be used on public facilities, parks, sports fields, streets, etc, neither should it be used for agricultural or forestry applications.
SAFETY WARNINGS
| **** | Read the instructions before use |
|---|---|
| **** | Cutting blades continue to run after the motor is switched off |
| **** | Do not expose to rain |
| **** | Wear head, eye, and ear protection for your own safety |
| **** | Please recycle responsibly – contact your local recycling depot for |
information
Read all safety warnings designated by the symbol and all instructions.
OPERATION
The machine is supplied with two cutting heads, a grass shear, and a hedge
trimmer.
To change the cutting heads:
- Remove the cover by applying gentle pressure to the area marked on the cover.
- Pull back the cover.
- Ensure that the marks on the housing and the gear wheel are aligned.
- Change the blade. Be aware that the blade is held in place by the two plastic ridges at the back.
- Ensure that the blade sits correctly in relation to the four pins.
- Replace the cover and check that it is secure.
Care: Never hold the blades when changing them. If the on/off switch is activated accidentally the blade can be set in motion.
Start the clipper by pressing the safety button with your thumb, whilst
squeezing the on/off switch.
In order that the clipper can be used ergonomically, the handle can be moved
90 degrees to the right or the left.
Depress and pull back button A – this will allow the handle to be rotated.
Always ensure that the handle is locked in place before commencing operation.
Battery and Charger
- Plug the adaptor into the socket inlet ( underneath the handle C) then plug the adaptor into a suitable power supply.
- After about 5 hours of full charging, the charging system turns off automatically to prevent overcharging.
- Unplug the adaptor from the power supply when not charging.
Do not operate the charger if the cable is damaged. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes and skin. It may be toxic if swallowed. Do not charge in wet or rainy conditions.
Extension Handle
Before using the extension handle, insert the shorter tube into the handle of
the grass shear, with the slot side down, until it locks into place.
Adjusting the angle joint in the extension handle allows the user to adjust
the angle of the trimmer up to 90 degrees. Always ensure that the head is
locked in place before use.
Loosening the handle’s “quick lock” allows the user to adjust the extension to
the desired length. Retighten the “quick lock” before working.
Plug the cable in the extension handle into the end of the trimmer unit.
To release, unplug the cable by pressing the green button on the handle.
| 
---|---
MAINTENANCE
Examine the clipper regularly to ensure that all screws and nuts are tight and
to check for signs of wear or damage to the cutting mechanisms.
Always fit the guards to the cutting blade when not in use or when
transporting.
Lubricate the cutting blades with lightweight oil after each use, taking care
not to activate the clipper accidentally.
Take care when handling the blades and never put your fingers between the
blades.
This product is covered by the Waste Electrical And Electronic Equipment
European
Directive 2002/96/EC means that all obsolete goods should be disposed of in an
environmentally friendly way. Please contact your local council for details of
your nearest recycling centre.
PARTS DIAGRAM AND LIST
No| Description| Qty| No| Description|
Qty
---|---|---|---|---|---
1| Bottom Cover| 1| 2| M3 Locknut| 1
3| Static Blade| 1| 4| Cover| 1
5| Moving Blade| 1| 6| Hedgetrimmer Blade Washer| 1
7| Cross Screw| 3| 8| Transmission Gear| 1
9| Central Stand| 1| 10| LED| 1
11| Right Head Cover| 1| 12| cross Screw| 7
13| Indicator Light Cover| 1| 14| Button| 4
15| DC Motor| 1| 16| Upper Head Cover| 1
17| Right Handle Housing| 1| 18| 18650 Lithium-ion Battery| 1
19| PCB| 1| 20| Spring| 1
21| Replacement Spring| 1| 22| Button| 1
23| Spring| 1| 24| Switch| 1
25| Left Handle Housing| 1| 26| Charge DC Base| 1
27| Left Head Housing| 1| 29| Transmission Gear| 1
29| Motor gear| 1| 30| Right Local Gear| 1
31| Cover Local Gear| 1| 32| Connect Pole Right Housing| 1
33| Connect Pole| 1| 34| Hang Spike| 1
35| Left Local Gear| 1| 36| Connect Pole Left Housing| 1
37| Rotating Left Housing| 1| 38| Spring| 1
39| Rotating Right Housing| 1| 40| Telescopic Tube| 1
41| Spring Line| 1| 42| Screw| 9
43| Extension Right Handle| 1| 44| Extension Handle Trigger| 1
45| Spring| 1| 46| Extension Left Handle| 1
47| Hand Spike| 1| 48| Spring| 1
49| Micro Switch| 1| 50| Moving Blade – grass shear| 1
51| Cover| 1| 52| Static Blade – grass shear| 1
53| Pin| 1| 54| Charger| 1
EC DECLARATION OF CONFORMITY
Declaration of Conformity
Pursuant to the regulations of the following EC Directives:
-98/37/EC
-2004/108/EC
-2000/14/EC & 2005/88/EC
Handy Distribution Ltd hereby declares that the product:
Machine Type: 3.6V hedge trimmer/Grass Shear Kit
Machine Model: THHSWH
Rating 3.6V d.c
Cutting Length: 120mm
Cutting Width: 8mm
Speed: 1000/min
Conforms to the main safety requirements of the EC Directives listed above.
This conformity is based on the following standards and normative documents:
EN60745-1:2006
EN60745-2-15:2006
ENISO3744:1995
ISO11094:1991
EN55014-1:2006
EN55014-2/A1:2001
EN61000-6-3:2007
The conformity assessment procedure followed was in accordance with Annex III
of the Directive 2000/14/EC
Measured Sound Power Level: 91.6dB(A)
Guaranteed Sound Power Level: 92dB(A)
The responsible person, based within the EC, is identified below
Name: Mr. Simon Belcher
Title: Managing Director
Company: Handy Distribution Ltd
Address: Hobley Drive, Stratton St Margaret, Swindon, Wiltshire. SN3 4NS
Signature:
Date 28th Oct 2008
To order spare parts and see the complete range of garden machinery and garden equipment from Handy, visit: www.thehandy.co.uk