TOTally wicked C-SKOPA Skope Air Vape Pod Kit User Manual
- June 6, 2024
- TOTally wicked
Table of Contents
TOTally wicked C-SKOPA Skope Air Vape Pod Kit
PRIME THE ATOMIZER HEAD
It is important to “prime” a new atomizer head before first use. Failure to do so can damage to the atomizer head. Remove the cartridge from the Skope Air battery by pulling straight out. Turn the cartridge upsidedown, then pull out the atomizer head. Drip a few drops of e-liquid onto the cotton wick through the openings on the sides of the atomizer head, and push back into the cartridge.
REMOVE CARTRIDGE
INSERT ATOMIZER HEAD
FILL THE CARTRIDGE:
Wait 5 minutes before vaping a new atomizer head. Open the filling flap
located on the side of the cartridge, insert your e-liquid bottle nozzle into
the inlet and fill. Leave a minimum air gap of around 2mm. Once the cartridge
is filled, close the filling flap and insert the cartridge back in to the
battery until you hear an audible click, indicating that the cartridge has
been securely fitted to the battery.
Note : Please wait 5 minutes after filling the cartridge before vaping to
allow the atomizer head to fully saturate with e-liquid.
INSERT CARTRIDGE
TURN POWER ON / VAPING
Press and hold to vape.
CHARGE THE BATTERY
BATTERY LIFE
ALSO RED WHEN CHARGING.
ATOMIZER HEAD LIFESPAN
Atomizer heads do not last forever and need to be replaced periodically. Lifespan is generally from a few days to several weeks, depending on power used, vaping style, flavour and type of e-liquid. A slight burnt taste, general loss of vapour production, or a reduction in flavour intensity can all be indicators that the atomizer head requires replacement.
POWERING ON AND OFF
To turn the Skope Air on or off, press the power button 5 times in quick
succession.
VAPING
The Skope Air has two activation modes to choose from. Either press the power
button to initiate vaping, or simply draw on the mouthpiece and the device
will begin to produce vapour.
ADJUSTING THE AIRFLOW
To adjust the airflow on the Skope Air, rotate the cartridge 180 degrees, this
will change the airflow to allow a tighter draw, or a slightly looser draw.
E-LIQUID LEVEL
To prevent the atomizer head from becoming dry and burning prematurely, ensure the e-liquid level does not drop below the fluid inlets on the atomizer head, visible through the cartridge. Additionally, the Skope Air comes with an atomizer head protection feature. If it detects low e-liquid levels, it will not provide any power and the LED on the power button will flash 3 times.
CHARGING THE BATTERY
To charge the battery, connect the charge port on the battery to a USB port or suitable wall adaptor with the supplied charging cable. The LED on the button will be illuminated red until fully charged, when it will turn off. The LED on the power button displays the remaining battery life and will change as the battery depletes.
LED Colour Battery Life
Green 100% – 60%
Blue 59% – 20%
Red 19% – 0%
CLEANING AND MAINTENANCE
The Totally Wicked Skope Air battery can be cleaned using a soft dry cloth or tissue; care should be taken to avoid any water from coming into contact with the battery. It is helpful to regularly wipe away any e-liquid residue that is left on the battery connector and inside the cartridge compartment. The Skope Air cartridge can be cleaned by removing from the battery, emptying, removing atomizer head, and rinsing in warm water. Wipe off and allow to dry thoroughly before fitting a new atomizer head and refilling after cleaning.
PRODUCT STORAGE AND BATTERY PRECAUTIONS
- Store the Totally Wicked Skope Air and its accessories away from children when not in use.
- Please charge using only the cable provided, or a genuine TW accessory.
- Please dispose of dead batteries in accordance with your country’s appropriate legislation.
- Do not carry batteries in a pocket or bag with other metallic objects.
- Do not charge the battery in a damp environment.
- Do not use the device when temperatures are outside the range -10 – 60°C.
- Do not charge the battery in temperatures under 0°C or above 45°C.
- Do not attempt to repair a faulty Totally Wicked Skope Air battery as these are sealed units with no serviceable parts. Attempted repairs will void the warranty.
WARRANTY
The Totally Wicked Skope Air kit has a 6 months parts warranty, with the exception of atomizer heads, which are consumable items and covered by “dead on arrival” warranty only. The USB cable supplied has a 12-month warranty. If any parts are found to be faulty within this time please contact our customer service team, whose details are below and we will arrange for a replacement. We may require the goods to be returned for further investigation.
ADDITIONAL PRODUCT INFORMATION
There are no reported medical side effects with this product. If you believe you experience a side effect, please contact the manufacturer. Manufactured in China under the authority of Pillbox38 (UK) Ltd, Stancliffe Street,Blackburn, Lancashire, BB2 2QR. Tel: 01254 692244 www.totallywicked.co.uk
Documents / Resources
|
TOTally wicked C-SKOPA Skope Air Vape Pod
Kit
[pdf] User Manual
C-SKOPA, Skope Air Vape Pod Kit
---|---