Totally Wicked Polaris User Manual

: June 6, 2024
: TOTally wicked

USER MANUAL

YOUR Polaris
QUICK START GUIDE

PRIME THE ATOMIZER HEAD

REMOVE CARTRIDGE INSERT ATOMIZER HEAD

FILL THE CARTRIDGE

Wait 5 minutes before vaping a new atomizer head.

INSERT CARTRIDGE

TURN POWER ON

ADJUST AIRFLOW

ADJUST WATTAGE

ADVANCED FEATURES

CHARGE THE BATTERY

USING YOUR POLARIS

REMOVING THE CARTRIDGE
To remove the cartridge from the Polaris, push the mouthpiece away from the power button to tilt the cartridge and release the magnetic retention, then push the cartridge upwards and out of its compartment.
PRIMING THE ATOMIZER HEAD
It is important to prime an atomizer head before use to prevent it from prematurely burning. To do this, remove the cartridge from the battery and remove the atomizer head by pulling, drip a few drops of e-liquid on the visible cotton inlets on the sides of the atomizer head and push back into the cartridge. Push the cartridge back into the battery.
ATOMIZER HEAD LIFESPAN
Atomizer heads do not last forever and need to be replaced periodically. Lifespan is generally from a few days to several weeks, depending on power used, vaping style, flavour and type of e-liquid. A slight burnt taste, general loss of vapour production, or a reduction in flavour intensity can all be indicators that the atomizer head requires replacement.
FILLING THE CARTRIDGE
Open the filling flap on the cartridge, insert your e-liquid bottle nozzle into the inlet and fill. Leave a minimum air gap of around 2mm. Close the filling flap. Note: Please wait 5 minutes after filling the cartridge before vaping to allow the atomizer head to fully saturate with e-liquid.
POWER ON/OFF
To turn the Polaris on or off, press the power button 5 times in quick succession.
VAPING
Press the power button and inhale on the Polaris mouthpiece, the device will begin to produce vapor.
ADJUSTING AIRFLOW
Remove the cartridge and locate the airflow adjuster below the filler flap. Slide the adjuster up to decrease airflow or down to increase.
ADJUSTING THE WATTAGE
The power on the Totally Wicked Polaris is adjustable, to do this press the up and down buttons below the display to adjust up and down respectively.

USING YOUR POLARIS

LOCKING/UNLOCKING
The Totally Wicked Polaris wattage adjustment can be locked to prevent the wattage from accidentally being altered during use. While the Polaris is powered on, press the power button 3 times. The screen will displa“LOCK”. Repeating this process will return the device to normal operation, and the screen will display “UNLOCK”.
CHARGING THE BATTERY
To charge the battery, connect the charge port on the battery to a suitable wall adaptor or USB port with the USB-C cable supplied; the battery life indicator symbol will display the state of battery charge. The Totally Wicked Polaris can be used whilst charging.

ADVANCED FEATURES

The Totally Wicked Polaris has some advanced features that can be accessed in the settings interface of the device by pressing the wattage up and wattage down buttons simultaneously for 1 second. Move from feature to feature using the wattage adjustment buttons, and select by pressing the power button. The Polaris will automatically close the settings interface after 5 seconds if no buttons are pressed.

SMART MODE
Smart mode allows the Polaris to remember your preferred power setting for each resistance of atomizer head you use. This can be enabled/disabled in the menu. Once Smart mode is selected, choose yes or no with the wattage adjustment buttons and select using the power button.
PUFF COUNTER
The puff counter on the device can be reset by entering the main menu of the device and using the wattage buttons to navigate to “puff” this will display your puff count across 7 days. Use the wattage button to select and view individual days. Select reset and press the power button to reset the puff counter.
COLOUR
The colour of the display of the Polaris can be changed. Use the wattage adjustment to navigate to the preferred color and select by pressing the power button.
DEFAULT
The device can be completely reset to original factory settings by selecting the “default” feature in the settings interface.
ID CHECK
Selecting ID check will bring up a unique product batch identifier code.
EXIT
Select exit to leave the settings interface and return to the main menu.

USING YOUR POLARIS

BATTERY LIFE INDICATION
As the Polaris battery life depletes, the battery indicator on the display will deplete.
LOW VOLTAGE PROTECTION
When the Polaris battery is out of usable charge, the screen will display “Battery low”. Simply charge the device to continue using.
NO ATOMIZER
If the Totally Wicked Polaris atomizer head is missing, not properly fitted, or no longer functioning, the screen will display “No Atomizer”. To fix this issue, refit or replace the atomizer head.
ATOMIZER LOW
If the atomizer head in the Totally Wicked Polaris causes a short or partial short circuit, the screen will display “Atomizer Low”. To fix this issue, refit or replace the atomizer head.

CLEANING AND MAINTENANCE

The Totally Wicked Polaris battery can be cleaned using a soft dry cloth or tissue; care should be taken to avoid any water from coming into contact with the battery. It is helpful to regularly wipe away any e-liquid residue that is left on the battery connector and inside the cartridge compartment. The Polaris cartridge can be cleaned by removing from the battery, emptying, removing the atomizer head, and rinsing in warm water. Wipe off and allow to dry thoroughly before fitting a new atomizer head and refilling after cleaning.

YOUR POLARIS

KIT CONTENTS
1 x Polaris battery
1 x Polaris cartridge
2 x EZ 0.4ohm atomizer heads
1 x USB-C cable
1 x User manual

SPECIFICATIONS

Dimensions: 85.0mm (length) x 42mm (width)
x 23mm (depth)
Weight: 140g
Battery capacity: 1800mAh
Maximum charging current: 2.0A
Tank/battery connection: Proprietary connection
Cartridge capacity: 2.0ml
Filling method: Top fill
Airflow type: adjustable

PRODUCT STORAGE AND BATTERY PRECAUTIONS

Store the Totally Wicked Polaris and its accessories away from children when not in use.
Please only use the charging cable provided.
Please dispose of dead batteries in accordance with your country’s appropriate legislation.
Do not carry batteries in a pocket or bag with other metallic objects.
Do not charge the batteries in a damp environment.
Do not use the device when temperatures are outside the range -10 – 60°C.
Do not charge the battery in temperatures under 0°C or above 45°C.
Do not attempt to repair a faulty Totally Wicked Polaris battery as these are sealed units with no serviceable parts. Attempted repairs will void the warranty.

WARNING This product contains magnets. If you have an ICD or pacemaker, avoid close or prolonged contact with cartridges that are not fitted into the battery, and keep the assembled device at least 15 cm from where your device is implanted.

WARRANTY

The Totally Wicked Polaris kit has a 6-month parts warranty, with the exception of atomizer heads, which are consumable items and covered by “dead on arrival” warranty only. The USB cable has a 12-month warranty. If any parts are found to be faulty within this time please contact our customer service team, whose details are on the back page of this booklet and we will arrange for a replacement. We may require the goods to be returned for further investigation.
ADDITIONAL PRODUCT INFORMATION
There are no reported medical side effects with this product. If you believe you experience a side effect, please contact the manufacturer.

Manufactured in China under the authority of Pillbox38 (UK) Ltd,
Stancliffe Street, Blackburn, Lancashire, BB2 2QR.
Tel: 01254 692244
www.totallywicked.co.uk