BRAINZ Powerbank Instruction Manual
- June 6, 2024
- BRAINZ
Table of Contents
BRAINZ Powerbank
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE.
What you need
- USB Cable (included)
- USB Adaptor or Power Supply (not included)
- Mobile phone (optional, which is QI Compatible) (not included)
How to charge
Connect the supplied cable to the powerbank and connect the USB side to a power source. The power bank will now charge. You can see how full the powerbank is at the moment by the flashing LED-lights. The powerbank is full when the lights stop flashing.
How to set it up
Fully charge the powerbank before the first use. You turn the powerbank on by pressing the button on the top righthand side. When you turn on the powerbank, the lights on the front will turn on. The lights indicate the current power level.
Charging
You can now charge your mobile phone in two ways:
- Place the back of the powerbank on the back of your phone or tablet using the twelve suction cups. Note: This only works if your mobile phone or tablet is QI compatible.
- You charge your phone or tablet by connecting the supplied cable to your device and the powerbank. This cable does not fit in certain phones, in that case please use your own cable.
Switching off
The powerbank will turn off automatically when all cables are disconnected.
Please note: Even though your mobile phone or tablet is QI Compatible,
this powerbank will not always charge wirelessly. The charging point for QI
Compatible phones or tablets differs per device. Please look for the charging
area on the back of your own device.
This manual applies to article number 38536 + 38537.
For more information about this product, please visit www.brainz-
electronics.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>