BRAINZ WOOFER SPEAKER Instruction Manual
- June 6, 2024
- BRAINZ
Table of Contents
BRAINZ WOOFER SPEAKER INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE
What you need
– USB Cable (included)
– AUX Cable (optional, not included)
– SD Card (optional, not included)
– Mobile phone or other Bluetooth enabled device (not included)
How to charge
Connect the supplied cable to the speaker and plug the USB side into a power source. Once you have done this, a red light on the speaker will start to glow. This means that the speaker is charging. The speaker will be fully charged when the light on the speaker goes out.
How to set it up
Turn on the speaker by sliding the ‘On-Off’ button to ‘On’. The speaker will appear under your new Bluetooth connections on your phone as BRAINZ Speaker S30. By clicking on it, your phone will connect and the speaker is ready to use.
Volume
With the ‘+’ button you can increase the volume. Use the ‘-‘ button to
decrease the volume.
AUX
To use the AUX port, plug one end of your AUX cable into your phone and the
other end into the speaker’s AUX port (this cable is not included). The
speaker will now automatically switch to AUX and disable Bluetooth.
SD
Thanks to the SD access port you can play MP3 files. To do this, insert an SD
card into the access port.
Power off
You can turn off the speaker by sliding the ‘On-Off’ button to ‘Off’.
This manual applies to article number 38528.
For more information about this product, please visit www.brainz-
electronics.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>