Dr Prepare 33′′ Oscillating Tower Fan With Remote DDF-1BKDF4 User Guide
- June 6, 2024
- Dr Prepare
Table of Contents
33′′ Oscillating Tower Fan With Remote DDF-1BKDF4
33 OSCILLATING TOWER FAN WITH REMOTE
Model: DDF-1BKDF4
User Guide
IMPORTANT SAFETY INSTRUCTIONS
This device is intended for household use ONLY and not for commercial,
industrial or outdoor use. Any other use is considered inappropriate and
therefore dangerous. The manufacturer cannot be held responsible for eventual
damage caused by inappropriate, improper or irresponsible use and/or for
repairs made to the product by unauthorised personnel.
This appliance is intended to be used in household and similar applications
such as: staff kitchen in shops, offices and other working environments; farm
houses by clients in hotels, motels and other residential type environments
bed and breakfast type environments
Do not touch the appliance with wet hands or feet. Do not insert or allow any
foreign objects or your fingers to enter grille openings.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and if they understand the hazards
involved.
The appliance must be kept out of children’s reach.
Basic safety tips must always be observed when using electric appliances to
avoid risks of fire, electric shocks and physical injuries.
Do not use the appliance if it is not operating correctly or seems damaged; if
in doubt, please contact professionally qualified personnel.
Make sure that the appliance is working correctly: if not, turn the appliance
off and have it checked by professionally qualified personnel.
Always unplug the appliance before you assemble, disassemble or make
adjustments to the appliance.
Do not move the appliance when it is operating. Unplug the appliance when not
in use.
Do not use the device at room temperatures above 104°F/40 °C. Do not move the
appliance when it is operating. Do not leave the device exposed to the weather
(sun, rain, etc.).
Do not pull the cord to disconnect the plug from the socket. If the power cord
is damaged, it must be replaced by the manufacturer, its authorized service
agent or professionally qualified personnel to avoid a hazard.
INSTALLATION
After removing the packing materials, check the integrity of the fan; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the
reach of children because they are potential sources of danger.
Before connecting the appliance, please make sure the voltage of the fan is
compatible with the power supply in your house.
The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
Do not place the appliance near sinks or other container of liquids (minimum
distance of 6.56 feet/2 meters) to prevent the unit from liquids. Keep the fan
far away from fabrics (curtains, etc.) or unstable materials that could
obstruct the air intake grille. Make sure that the electric cord is not
touching rough, hot or moving surfaces.
Place the appliance on a horizontal, flat surface or table. In the event of a
breakdown or poor operation, turn the fan off and contact Dr. Prepare Support
Team for help.
IDENTIFYING PARTS
Attention: Do not plug in the fan before the base is correctly assembled with
screws.
Step 1: Take out the fan and spare parts from the packaging. Loosen 4 screws
from the bottom of your fan.
D. Base 1 E. Base 2 F. Screws (4 pcs)
Step 2: Connect one base part to the other by the slots. Align the base with
the fan via screw holes (or via the 2 holes for the pillars) and tighten the
screws.
OPERATION
CONTROL PANEL
LED DISPLAY
You can use the control panel or the remote control to set the fan. 1. Plug
the fan into a wall outlet, the LED screen will display the current room
temperature. 2. Press the ON/OFF button ,the fan will start at Medium speed.
When the fan is running,
press the ON/OFF button once to turn off the fan. 3. Press the SPEED button to
choose the Fan Speed, including Low, Medium, and High.
The speed level is displayed on the LED screen.
4. Press the MODE button select the Wind Mode among Normal Mode , Natural
Mode ,and Sleep Mode .
5. Press the OSC button , and the fan starts oscillating. Press this button
again to stop oscillation. The maximum oscillation angle is 70°.
6. Press the TIMER button to set the set the timer with 1-hour increment
(1-12 Hours).
Remote Control Please remove the battery pull tab before using the remote
control. Replace the battery with the same type (CR2025 Type Lithium Battery),
making sure the battery is installed correctly.
WARNNING: Turn off the fan and unplug the adapter from the wall outlet when
the fan is not in use for long periods.
SPECIFICATIONS Power supply: AC 120V~60Hz Power: 45W
CLEANING AND MAINTENANCE
Attention: Ensure the fan is turned off and unplugged before cleaning. Use a
soft cloth to gently wipe the outer surfaces of the fan clean. Do not immerse
any part of the fan in water or other liquids. Clean the motor’s air inlet to
keep it from dust and lint.
If the fan will not be used for long periods, we advise you to store the fan
with this manual in its original packaging in a cool, dry place. CORD STORAGE
You can coil the power cord around the base and push the plug into the slot at
the back of your fan. Please refer to the picture.
WARRANTY
Dr.Prepare products are covered by a 12-month limited warranty from the
original purchase date. If any problems occur, please contact our support
team. We only provide after-sales services for products that are sold by
Dr.Prepare or retailers and distributors authorized by Dr.Prepare. If you have
purchased your unit from other channels, please contact your seller for more
information about return and warranty.
CUSTOMER SUPPORT
If you have any questions or concerns, please send us an email at
support@drprepare.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>