Dr Prepare DP-0HV05 Electric Unisex Heated Vest Instructions
- June 6, 2024
- Dr Prepare
Table of Contents
DP-0HV05 Electric Unisex Heated Vest
Instruction Manual
A HOLDER-POCKET
B POWER CABLE
C BATTERY
INSTRUSTIONS
Please use a portable battery pack with 2A or 2.4A USB output to power up this vest.
- Unzip the inner pocket and take out the USB cable.
- Insert the USB cable into the port of a portable charger. Then press the Power Button on the portable charger. The switch will cycle through Red, White, and Blue briefly.
- Press and hold the switch for 2 seconds and it turns red. The vest begins to heat on a High level.
- Press the switch again and it will turn blue. The vest adjusts to the Low level.
- Press the switch and it will turn white. The vest adjusts to the Medium level.
- Press and hold the thermal switch for 2 seconds again to stop the vest from heating.
CARE
- Take out the portable charger. Hand washes the vest with a neutral detergent. Do not clean the vest by rubbing or kneading roughly. Drip dry the vest in a cool, well-ventilated place before the next use.
- Please put the vest in a laundry bag to extend its lifetime if you prefer a machine wash.
WARNING
- Do not plug the vest into your portable charger if you do not plan to use it for a long time.
- Do not hand wash the vest in hot water or with strong acidic detergent.
- Do not wear the vest when it is wet. Once the vest is wet by rain or splashes, shut off power and stop using the vest immediately.
- The runtime of the heated vest varies with the capacity of your portable charger.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>