Dr Prepare DPS-PS2-1BKPD-US Portable Laptop Power Bank User Manual
- June 6, 2024
- Dr Prepare
Table of Contents
Dr Prepare DPS-PS2-1BKPD-US Portable Laptop Power Bank User Manual
ABOUT THE UNIT
Thank you for purchasing the portable power station. In case there is power failure or you need to charge during a trip, you can temporarily charge your electrical or digital devices with this unit.This unit can provide USB, DC and AC output. You can keep laptops, appliances, lights and more going for hours longer. Before using this unit, please read the user manual carefully and properly keep it for reference.
ATTENTION
The unit provides Modified Sine Wave output
The unit provides Modified Sine Wave output and can be compatible with AC electric appliance that works with Corrected waveform(power≦85W). However, devices featuring an AC motor may not fully perform with modified sine wave, such as an electric fan. Some AC appliances may even produce hums or limited noise. Appliances like refrigerators, microwaves, and compressors that use AC motors and some delicate medical equipment will be better off using a pure sine wave inverter. Therefore, we kindly advise you to use the power station for emergencies and do not regard it as the alternative to the wall outlet for long-term use. Please check the power requirements of your devices before plugging them into the corresponding output ports.
SPECIFICATIONS
※ There may be some differences on different spare parts. Please adhere to the actual product instead.
PRODUCT DESCRIPTION
ATTENTION!:AC Outlets, AC output voltage and frequency will be difffferent according to difffferent countries or areas. Please refer to the actual product before using.
USING YOUR POWER STATION
1). How to power DC12V appliances(such as headlamp, fan) with this product?
Connect the appliance to the DC output port, short press the power switch to start charging. You can check the real-time power level of the power station on the LED screen.
Attention : please make sure that your DC12V appliance comes with a 5.5 mm DC plug (the diameter of the DC output port on this power station is 5.5 mm). You can contact the manufacturer of devices and purchase corresponding adapters if necessary
※Note : The DC output voltage ranges from 9V to 12.6V and the maximum output current is 10A. Due to the chemical property of batteries, DC output volatge drops as the battery capacity goes down. If your DC12V appliances is not built in with input voltage stabilizer, it may shut down because of the low input voltage. So please unplug your device and recharge the power station in time.
Protection Mode:
Short-circuit/Overloading Protection: If the DC output short-circuits or
overloads (>120W), the unit will shut down to protect itself. Please
troubleshoot problems with your DC12V appliances before restarting the power
station by pressing the power button.
2).How to provide power for AC appliances with this product?
Connect your AC appliance via its power cable to the AC output port of the unit. Short press the power switch to turn on, then press and hold the”AC” button and the unit will start offering power to your appliances. You can check the real-time power level of the power station on the LED screen simultaneously.
WARNING! The AC outlets, AC voltage, and frequency are different according to different countries; please carefully check whether the product specifications are consistent with the specifications of your appliances before use to prevent danger.
※ When the AC port is not in use, turn it off to reserve power.
Protection Mode:
Short-circuit/Overpower Protection: If the AC output short-circuits or overloads (>85W), the unit will shut down AC output to protect itself. ※Devices like refrigerators, ice makers, or laser printer may require surge power (usually exceeds 100W) to operate, which may activate protection features of the power station. Please unplug the appliances and contact the manufacturer of your device for more information.
3). How to charge USB devices with this product?
Plug your USB device into the USB output port via its original USB cable. Then press the ” ” button and the power station starts charging.
TYPE-C Output: This product supports PD 45W (Max.) to charge compatible devices (USB-C / PD 5V 9V 12V 15V 20V ). The actual output voltage and current vary with devices. Please contact the manufacturer of your device for more information.
4). How to use the flashlight?
This unit is built with white LED flashlights. Press the flashlight button to turn it on and another press will enable the flashlights to swich to Blink / SOS mode. Press the button again to switch off the flashlights.
Warning! Do not look at the flashlight directly in case of any damages due to the strong light.
5).How to recharge the power station?
Charge through TYPE-C Port
Using the included USB C cable, plug the unit into a USB-C Charger (not included) to charge the unit. You can keep track on the charge by checking the battery percentage (“%” icon will blink) on the LED screen. The unit is fully charged when “100%” shows up. After the unit is fully charged, please unplug the power station in time.
SECURITY AND MAINTENANCE
a) Do not short-circuit the uni t. To avoid short-circuiting, keep the unit
away from all metal objects (e.g. coins, hair-pins, keys, etc.).
b) Do not place the unit close to or in a fire, near water, or expose it to
heat. Keep away from high temperatures. Do not expose the unit to direct
sunlight.
c) Keep away from high humidity, dusty places.
d) Do not disassemble or reassemble this unit.
e) Do not drop, place heavy objects or hit the product strongly.
f) This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
g) Children should be supervised to ensure that they do not play with the
appliance.
h) Do not cover the device with towels, clothing and other item.
i) The unit may become hot when charging. This is normal. Use caution when
handling；
j) Do not charge the unit over the required time.
k) Disconnect the unit when fully charged
L) Use the unit properly to avoid electronic shock.
M) Please deal with scrap products in accordance with the regulations, do not
treat the built-in battery as a household garbage, so as not to cause the
explosion and pollution.
N) The product is only used for emergency situations, it cannot replace the
standard DC or AC power of household appliances or digital products.
TIPS FOR APPLICATION
a) We recommend you to use this unit within an ambient temperature of 14°F –
104°F to ensure the performance.
b) When charging, in order to avoid interference, please keep the unit away
from TV, radio and other equipment.
c) Please unplug the cable and store the unit if you do not plan to use it in
a while.
d) Some devices needs to be set to the charge mode to get charged. Please
refer to the manual of your devices for more information.
e) To preserve the battery lifespan, we advise you to use and recharge the
unit at least once every 6 months.
BATTERY INFORMATION
Your device has and internal, non-removable, rechargeable battery. Do not
attempt to remove the battery, as you may damage the device.
The battery can be charged and discharged over 1000 times, but it will
eventually wear out
USE IN COLD WEATHER
Cold temperatures (below freezing) can affect the unit’ s battery capacity due to chemical property of the battery. If you’ ll be living off-grid in sub-zero conditions, we recommend you to keep your unit in an insulated cooler and connect the power station to a power source (solar panels). The natural heat generated by the unit contained in an insulated cooler will keep battery capacity at its highest.
RECYCLE
Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials.
FCC STATEMENT
The operation meets the following two conditions:
- The equipment will not cause harmful interference.
- The equipment must accept any interference received, including interference that may result in accidental operation.
Note:
The equipment has been tested and meets the restrictions of Category B digital equipment in Part 15 of FCC Rules.
- These restrictions are designed to provide reasonable protection against harmful interference in housing installation.
- This equipment will generate, use and radiate radio frequency energy. If it is not installed and used according to the instructions, it may cause harmful interference to radio communication.
- However, there is no guarantee that interference will not occur in a particular installation. If the device does cause harmful interference to radio or television reception (which can be determined by switching off and switching on devices), users are advised to attempt to correct the interference by one or more of the following measures:
(1) Re-adjusting or placing the receiving antenna.
(2) Increase the distance between the device and the receiver.
(3) Connect the device to a different circuit outlet from the circuit connected to the receiver.
(4) Consult distributors or experienced radio/television technicians for help.
WARRANTY
Dr.Prepare products are covered by a 12-month limited warranty from the original purchase date. If any problems occur, please contact our support team.
We only provide after-sales services for products that are sold by Dr.Prepare or retailers and distributors authorized by Dr.Prepare. If you have purchased your unit from other channels, please contact your seller for more information about return and warranty.
CUSTOMER SUPPORT
If you have any questions or concerns, please send us an email at support@drprepare.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>