Dr Prepare DDF-1BKDF4 33 Inch Oscillating Tower Fan with Remote Instruction Manual

: June 6, 2024
: Dr Prepare

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION
IDENTIFYING PARTS
OPERATION
CLEANING AND MAINTENANCE
WARRANTY
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

33 OSCILLATING TOWER FAN WITH REMOTE
Model: DDF-1BKDF4

User Guide

IMPORTANT SAFETY INSTRUCTIONS

This device is intended for household use ONLY and not for commercial, industrial or outdoor use. Any other use is considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper, or irresponsible use and/or for repairs made to the product by unauthorised personnel.
This appliance is intended to be used in household and similar applications such as:
- staff kitchen in shops, offices, and other working environments;
- farm houses
- by clients in hotels, motels, and other residential type environments
- bed and breakfast type environments
Do not touch the appliance with wet hands or feet.
Do not insert or allow any foreign objects or your fingers to enter grille openings.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
The appliance must be kept out of children’s reach.
Basic safety tips must always be observed when using electric appliances to avoid risks of fire, electric shocks and physical injuries.
Do not use the appliance if it is not operating correctly or seems damaged; if in doubt, please contact professionally qualified personnel.
Make sure that the appliance is working correctly: if not, turn the appliance off and have it checked by professionally qualified personnel.
Always unplug the appliance before you assemble, disassemble or make adjustments to the appliance.
Do not move the appliance when it is operating.
Unplug the appliance when not in use.
Do not use the device at room temperatures above 104°F/40 °C.
Do not move the appliance when it is operating.
Do not leave the device exposed to the weather (sun, rain, etc.).
Do not pull the cord to disconnect the plug from the socket.
If the power cord is damaged, it must be replaced by the manufacturer, its authorized service agent or professionally qualified personnel to avoid a hazard.

INSTALLATION

After removing the packing materials, check the integrity of the fan; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger.
Before connecting the appliance, please make sure the voltage of the fan is compatible with the power supply in your house.
The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
Do not place the appliance near sinks or other container of liquids (minimum distance of 6.56 feet/2 meters) to prevent the unit from liquids.
Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille.
Make sure that the electric cord is not touching rough, hot or moving surfaces.
Place the appliance on a horizontal, flat surface or table.
In the event of a breakdown or poor operation, turn the fan off and contact Dr. Prepare Support Team for help.

IDENTIFYING PARTS

Attention: Do not plug in the fan before the base is correctly assembled with screws.
Step1: Take out the fan and spare parts from the packaging. Loosen 4 screws from the bottom of your fan.

| D. Base 1
E. Base 2
F. Screws (4 pcs)
---|---

Step 2: Connect one base part to the other by the slots. Align the base with the fan via screw holes (or via the 2 holes for the pillars) and tighten the screws.

OPERATION

You can use the control panel or the remote control to set the fan.

Plug the fan into a wall outlet, the LED screen will display the current room temperature.
Press the ON/OFF button ,the fan will start at Medium speed. When the fan is running, press the ON/OFF button once to turn off the fan.
Press the SPEED button to choose the Fan Speed, including Low, Medium, and High. The speed level is displayed on the LED screen.
Press the MODE button select the Wind Mode among Normal Mode , Natural Mode , and Sleep Mode .
Press the OSC button , and the fan starts oscillating. Press this button again to stop oscillation. The maximum oscillation angle is 70°.
Press the TIMER button to set the set the timer with 1-hour increment (1-12 Hours).

Remote Control

Please remove the battery pull tab before using the remote control.
Replace the battery with the same type (CR2025 Type Lithium Battery), making sure the battery is installed correctly.

WARNING: Turn off the fan and unplug the adapter from the wall outlet when the fan is not in use for long periods.

SPECIFICATIONS
Power supply: AC 120V~60Hz
Power: 45W

CLEANING AND MAINTENANCE

Attention: Ensure the fan is turned off and unplugged before cleaning.

Use a soft cloth to gently wipe the outer surfaces of the fan clean.
Do not immerse any part of the fan in water or other liquids.
Clean the motor’s air inlet to keep it from dust and lint.
If the fan will not be used for long periods, we advise you to store the fan with this manual in its original packaging in a cool, dry place.

CORD STORAGE
You can coil the power cord around the base and push the plug into the slot at the back of your fan. Please refer to the picture.

WARRANTY

Dr.Prepare products are covered by a 12-month limited warranty from the original purchase date. If any problems occur, please contact our support team.
We only provide after-sales services for products that are sold by Dr.Prepare or retailers and distributors authorized by Dr.Prepare. If you have purchased your unit from other channels, please contact your seller for more information about return and warranty.