SwitchBot W1301200 1080p Security Indoor Camera User Manual

SwitchBot Indoor Cam
User Manual

In the Box

• Indoor Cam x 1
• Base x 1
• User Manual x 1
• 3M Sticker x 1
• Screw Pack (2*M2.6 screws) x 1
• Micro USB Cable (2m) x 1
• USB Adaptor x 1

Device Instruction

Front
LED Indicator Light
Camera Lens
Mic
Base
Back
Reset Button
Mounting Slot
Speaker
MicroUSB Port
Bottom
Mounting Slot
Side
MicroSD Card Slot

Preparation

• A smartphone or tablet device running iOS 9.0+ or Android 5.0+
•  Make sure there is an accessible 2.4GHz Wi-Fi network

Getting Started

|
---|---
https://apps.apple.com/cn/app/switchbot/id1087374760| https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en

Step 1 Download the SwitchBot app on App Store or Google Play Store.
Step 2 Create a SwitchBot account and sign in to the app.
Step 3 Place Indoor Cam close to the router. Connect the USB cable to the back of the Indoor Cam and to a 5V 1A USB adaptor. Then plug it into a power outlet.
Step 4 On the app, tap the “+” icon on the top right of the Home page. Tap the “Indoor Cam” icon and follow the instructions to complete the setup.

Light Indication

Installation

Choose a spot
Choose a spot where it can provide the desired view of your home, within reach a  power outlet.

Place Indoor Cam on a table or shelf
Place Indoor Cam directly on a table or shelf with or without the Base.

Stick Indoor Cam to a flat surface
Mount the Base to the back or the bottom of the Indoor Cam. Then stick it to a flat surface using the 3M sticker.

Stick Indoor Cam to an iron surface
Mount the Base to the back or the bottom of the Indoor Cam and attach it to an iron surface or a magnet.

Mount Indoor Cam to a wall
Mount the Base to the back or the bottom of the Indoor Cam. Then remove the bottom cover of the Base and use the provided screws to mount Indoor Cam to a wall. Refer to , our support page for detailed steps.

How to Reset

Press the Reset Button on the back of the Indoor Cam for 3 seconds or until a ring tone is, heard.

Return and Refund Policy

SwitchBot Indoor Cam has one year warranty (starting from the purchasing day). The m situation below do not fit the Return and Refund Policy

•  Intended damage or abuse.
• Inappropriate storage (drop-down or soaking in water).
• User modifies or repairs.
• Using loss.
•  Force majeure damage (natural disasters).

If you have any concerns or problems when using our products, please kindly send feedback from the Profile > Feedback page in the SwitchBot app.

Contact and Support

Setup and Troubleshooting: support.switch-bot.com
Support Email: support@wondertechlabs.com
Feedback: If you have any concerns or problems when using our products, please kindly
send feedback from the Profile > Feedback page in the SwitchBot app.

FCC Warning

Manufacturer’s Name: Woan Technology (Shenzhen) Co., Ltd. Sample Description: SwitchBot Indoor Cam
Trade Mark: SwitchBot
Model number: W1301200
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used
  in portable exposure conditions without restriction.

FCC RF exposure statement:
The equipment complies with the FCC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Safety Information

• This camera is for indoor use only.
• Keep the device away from water, fire, humidity or hot environments.
• Unplug this device during lightning storms or when unused for long periods of time.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use a damaged charger or USB cable to charge the device.
•  Do not use any other chargers than those recommended.
•  Do not use the device where wireless devices are not allowed.
• The adapter shall be installed near the equipment and shall be easily accessible.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>