savio TWS-03 Wireless Bluetooth Earphones User Manual
- June 6, 2024
- Savio
Table of Contents
savio TWS-03 Wireless Bluetooth Earphones User Manual
Thank you for choosing our product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, on social media or on the website of the store where
you made the purchase.
If you want to show off our device on Savio.net.pl FanPage on Facebook, we
will be very pleased.
If there is something that we could improve on our products, please write to us at [email protected]
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.
Product scheme
- Primary button: turn on/off, pause/play of the track
- Microphone
- Volume up/nexttrack choice
- Volume down/previous track choice
- LED diode mode indicator
- Charging connector
Earphones charging
- Connect the charging cable to the charging socket in the earphones(red indicator diode will start to backlit in red colour, indicating that the earphones are being charged).
- When the earphones are fully charged, the indicatordiode will be backlit in blue colour.
- Earphones are ready to use.
Earphones Pairing
SAVIO TWS-03 Earphones can be used together or apart. By default, earphones are connected with each other.
Pairing two earphones with the transmitting device
-
Press and hold the primary button located on each of the earphones. You will hear “Power on”. After a proper connection of the earphones with each other, you will hear “Pairing”.
-
Turn on the Bluetooth mode in the transmitting device(i.e. smartphone), then turn on the device search and choose SAVIO TWS-03 from the list.
If the earphones have been already paired with a given device, they will be connected automatically. -
After proper connection of the earphones with a transmitting device, you will hear ”Connected”, LED diode on the earphones will start to blink in blue colour, in a 5 seconds intervals.
Paring one earphone with a transmitting device
- Press and hold the primary button located on one of the earphones. You will hear “Power on”.
- Turn on the Bluetooth in the transmitting device (i.e. smartphone), then turn on the device search and choose SAVIO TWS-03 from the list. If the earphones have been already paired with a given device, they will be connected automatically.
- After proper connection of the earphone with a transmitting device, you will hear “Connected”, the LED diode in the earphone will start to blink in blue colour, in 5 seconds intervals.
Buttons description
Primary button
- Click and hold: Turn the earphones on/off
- Click once while incoming call: picks up the call
- Click and hold while incoming call: rejects the call/ hangs up
- Click once while playback: pause/play
- Fast double click: dialling the last called number
Button
- Click and hold: volume up
- Single click: chooses the next track from the list
Button
- Click and hold: volume down
- Single click: chooses the previous track from the list
Package content
- Wireless Bluetooth earphones Savio TWS-03
- Charging cable
- 3 pairs of earbuds (2 pairs of silicone pads, 1 pair of foam pads, for better comfort and fit and soundproof from the outside)
- User manual
Technical specification
- Bluetooth Version: 5.0
- Range: up to 10 meters
- Earphones work time on a single charging cycle: up to 5 h
- Charging time: up to 1,5 h
- Stand by time: up to 100 h
- Impedance: 32 Ω
- Frequency response: 20 Hz – 20 kHz
- Sensitivity: -38 db
- Build-in microphone: Yes
- Earphones weight: 18,8 g
Important information
- Blinking red diode on one of the earphones and communicate “Battery low” informs about the low battery level.
- In case when the primary button placed on earphones will not respond and LED diode will not be backlit, it means that earphones are depleted and needs to be charged.
- To charge earphones it is recommended to use a 1A charger or charge them from Computer USB port.
- When earphones are connected with each other, clicking and holding the primary button on one of them will turn off both earphones.
This
symbol means that in according with European Union directive 2012/12EU,
electrical and electronic equipment should not be disposed of with other
household waste. The equipment should be sent to a local collection point for
this type of waste or to a recycling center. Please contact your local
authority for information on available disposal methods. Importer disposal of
waste is threatened by the penalties provided for by law in force in the given
area. Proper disposal of equipment will help to avoid the negative effects
that threaten the environment and human health, in the event of improper
utilization.
Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: [email protected], and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.