DYNASTY FirePlace DY-BTX Series 82 Inch Recessed Linear Electric Fireplace Installation Guide

DYNASTY FirePlace DY-BTX Series 82 Inch Recessed Linear Electric Fireplace

Flicker Rod Removal and Installation

Remove back panel of the fireplace by removing the screws surrounding

the backplate.

Loosen the screws to release the metal ring between the reflective

flicker rod shaft

Pull it out

(It could be hard, but still, try to be gentle)

Pull the other side.

Flicker rod installation

1. Place a new flicker rod on one side first ( Check the 6- 4 Photo where the red circle)
2. Insert the other side of the flicker rod into the motor
3. Screws on the two flicker rod metal rings
4. Place the bake panel and screws on

VISIT USON OUR WEBSITE :
WWW.DYNASTYFIREPLACES.COM

Documents / Resources

| DYNASTY FirePlace DY-BTX Series 82 Inch Recessed Linear Electric Fireplace [pdf] Installation Guide
DY-BTX Series 82 Inch Recessed Linear Electric Fireplace, DY-BTX Series, 82 Inch Recessed Linear Electric Fireplace, Recessed Linear Electric Fireplace, Linear Electric Fireplace, Electric Fireplace, Fireplace
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>