PHILIPS 9451746230 Hue Lily XL White/Color Outdoor Extension Spotlight User Manual
- June 4, 2024
- Philips
Table of Contents
9451746230 Hue Lily XL White/Color Outdoor Extension Spotlight
User Manual
S/N:A85115
9451746230 Hue Lily XL White/Color Outdoor Extension Spotlight
IMPORTANT SAFETY INSTRUCTIONS
- Product appearance may vary from the image shown
- UL Listed Landscape Lighting System This luminaire and power supply unit is intended for installation in accordance with the National Electrical Code and local code specifications Failure to adhere to these codes and instructions may result in serious in1ury and/or damage to the PSU and v01d the warranty These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency related to installation: operation, maintenance, or mounting situation Should specific problems occur that are not addressed by these instructions, contact your Sales Representative or distributor for assistance SAVE THESE INSTRUCTIONS for future reference
- The warning does not use an extension cord.
- The plug on the power supply unit must be connected to a GFCI-protected hooded flush type cover plate receptacle marked “Wet Location” while in use
- Protect the wire by routing it in close proximity to the light fitting or next to a building structure such as a house or a deck
- The landscape wire and connector can also be hidden under a stone or burned under the grass at a maximum depth of 6 inches (15 2 cm)
- Phillps recommends a minimum depth of 4 inches when burying in the lawn to prevent damage from aerators or other lawn plugging equipment
- Philips recommends not to bury the T-shaped connectors
- Do not submerge luminaire or PSU in water
- WARNING: Risk of Electric Shock Do not install a power supply unit or luminaires within 10 feet (3 05 m) of a pool, spa, or fountain
| 
---|---
| 
| 
Use only with Philips HUE 24V ****SELV LED Power Supply!
SAFETY INSTRUCTIONS – PART B
-
The manufacturer advises the correct use of Luminaires (lighting fixtures)! Therefore always follow these instructions to ensure the correct and safe installation and functioning of the luminaire and keep it for future reference.
-
Turn off electrical power at the main fuse or circuit breaker box before commencing installation, maintenance, or repair.
-
If in doubt, consult a qualified electrician or contact your retail outlet. Ensure that you always install the luminaire to the local electrical code. Certain regulations indicate that luminaires should be installed by a qualified electrician.
-
Observe the correct color of the wiring before installation: white (N), black (L), and green or bare copper wire (Ground).
-
Do not connect this luminaire to a non-grounded electrical system.
WARNING: Installing this fixture in a non-grounded electrical system could allow metal parts of the luminaire to carry electrical current if any wires or wire connections become broken or loose. Under this condition, anyone coming in contact with the luminaire is subject to an electric shock which could cause injury or death. -
Always use wire nuts/connectors rated for the correct gauge and number of wires used.
CAUTION: Be certain that no bare wire strands are exposed outside of the wire nuts/connections (if applicable). -
Be careful not to damage or cut the wire insulation ( covering) during installation. Do not permit wires to contact any sharp edges.
-
Do not remove the thermal insulation pad(s). Doing so will result in increased temperatures and a possible risk of fire.
-
Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. Avoid liquid on all electrical parts.
-
Always consider all the technical specifications of the luminaire. Verify the stated icons on the identification label on the luminaire and the icons that are shown in part A of your safety instructions.
ATTENTION: Below you will find all the explanations with numeric
reference to the icons respec tively in front of these PART-B safety
instructions. Applicable icons to your fixture are shown in PART-A safety
instructions.
01-This luminaire should only be installed indoors.
02-The luminaire is suitable for outdoor usage.
03- Only suitable for dry locations.
04- Suitable for damp locations.
OS- Suitable for wet locations.
06- Luminaire is suitable for base-up mounting.
07- Luminaire is suitable for base down mounting.
08- Luminaire is suitable for horizontal mounting.
09-The luminaire is only suitable for fixing the ceiling.
I 0-The luminaire is only suitable for fixing the wall.
I 1- The luminaire is suitable for fixing the wall and the ceiling.
12- Always observe the minimum distance between the lamp and the surface being
lit as indicated on the icon.
13- Free air space of at least 4 inches must be kept between the top of the
shade and the bottom of the canopy.
14- Immediately replace a cracked or broken safety glass and use only
manufacturer-approved parts.
15- Strip the wire as indicated in the diagram.
16- Use heat-resistant cable for wiring the luminaire into the mains.
17- MAX …. W: only use lamps suitable for this luminaire and keep within the
maximum specified wattage.
18-This product is not suitable for children under 14 years
19-The Luminaire has a ground conductor identified with green insulation or
bare copper wire ..
20-The luminaire is only suitable for a lamp with built-in safety or a low-
pressure lamp. Extra safety glass is not necessary.
21- Capsule and linear halogen lamps may not be touched by bare hands.
22-The luminaire is equipped with a fuse. If the luminaire is out of order
after the bulb has been replaced, the internal fuse has to be replaced. If
contact with the internal wiring can be made during this opera, this should
be done by a competent electrician.
23-The luminaire can be used with a dimming circuit. Consult a qualified
electrician for choosing the right type (especially important for low voltage
luminaires).
24-The Luminaire cannot be used with a dimming circuit.
25-The luminaire is dimmable with the supplied dimmer ONLY. Do not connect to
an additional dimmer.
26-The dimmability features depend on the chosen lamp. More information on
disability features is available in the information pack provided with the
bulb.
27- Luminaire with time and light setting options. Minimum and maximum will be
shown in the icon in part
28-The luminaire can be placed at a maximum of 20k height.
29-To reach optimal working, you have to place the luminaire at the height
mentioned in the icon.The maximum and minimum reach of the detector is also
mentioned in the icon in part
30-The standard active range of vision of the detector covers the given
degrees mentioned in the icon.
31- Ensure that you don’t drill through electrical wires or any other
obstruction in the wall or ceiling during installation!
32-This luminaire contains in some places very hot parts.
33- Product to be installed by two people.
34- The product is for indoor use only. Do not use in wet locations, areas
directly exposed to water or outdoors.
35- The product is ZigBee certified. Zigbee is an open standard for indoor
wireless communication. All Philips ZigBee Certified products can be connected
with other Philips ZigBee Certified products.
36- Bluetooth9 enabled product. The Bluetooth” word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Signify is under license. Other trademarks and trade names are those of
their respective owners.
Signify warrants that this device will be free from defects in material and workmanship and will operate for 2 years unless a different period is stated in or on the pacl<aging of the product, based on up to 3 hours average working time per day days per week when used as directed. If this device does not conform to the warranty, Signify will send you, at its election, a replacement device or refund your original price upon receipt of the returned device, register receipt, and proof of purchase. Please call our toll-free number, 1.aJ0-555-0050, or write to us (address indicated on the pacl<aging) to find out how to own the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse, or acts of God. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. ABILITY FOR INCIDENT AL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSEL Y EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province.
Please go to www.meethue.com to learn more about Hue
and how to use it.
FCC ID: 2AGBW9290019684X / 2AGBW9290019683X / 2AGBW9290012630X IC: 20812-9684X
/ 20812-9683X / 20812-2630X This device complies with Part 15 of the FCC Rules
and with R55-210 of Industry Canada. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference. and
(2) this device must accept any interference received, including interference
that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation This device generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications.
IC Certification:
– Hue Engine: company number: 20812 UPN 9683X / 20812 UPN 2630X
This Class 8 digital apparatus complies with CAN ICES-3(8)/ NMB-3(8).
The digital apparatus does not exceed the Class B limits for radio-noise
emissions from digital apparatus as set out ln the Radio Interference
Regulations of the Canadian Department of Communications
NOTICE: Changes or modifications made to this device are not expressly
approved by Signify North America Corporation (USA) and Signify Canada
Ltd/Signify Canada Ltee. (Canada) (collectively “Signify”) may void the U.S
FCC and Canadian authorization to operate this device
The advanced Interface module complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
This device should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. However. there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception. which can be determined by turning the device off and on. the user is encouraged to try to correct the interference by one or more of the following measures
- Recent or relocate the receiving antenna
- Increase the separation between the device and receiver
- Connect the device to an outlet on a circuit different from that to which the receiver Is connected
- Consult the dealer or an experienced radio/television technician for help
Bluetooth® enabled product.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG.Inc. and any use of such marks by Signify ls under license.
Other trademarks and trade names are those of their respective owners. Manage
ln accordance With disposal laws in your area “Hue Personal Wireless Lighting”
is a trademark owned by Signify Holding B.V.
Wireless Specification:
Wireless RF mode frequency band: 2400-2483.5 MHz
Wireless communications protocol: IEEE 802.15.4
Operating channels Zigbee: channels 11 – 26
Operating channels Bluetooth: channels 0-39
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873, USA
Signify Canada Ltd/Signify Canada Ltee.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Questions or Comments/ Questions ou commentaires :
1-800-555-0050
lmportardo y/ o distribuido en Mexico por:
Signify Mexico S.A. de C.V.
Av. La Palma N° 6-Col. San Fernando, La Herradura Huixquilucan
Edo. De Mexico, CP. 52784 – R.F.C PME- 620620-E84
Centro de contacto
01- 800-508- 9000
© 2019 Signify Holding
All rights reserved
www.meethue’.com
4404 029 12351
Last update 21/08/19
Install Hue fixtures/’bulbs:
| Find the serial number of the product as indicated in the A manual.
Write down the serial number
---|---
| Install your Hue fixture, then switch 1t on.
Please check the A manual.
| Start the Hue app and follow the instructions
| Go to the app settings menu.
| Select Light set up for adding your fixtures.
| Tap on the ( +) Icon and follow on-screen instructions
*You have succeeded in pairing your Hue fixtures to the Hue bridge.**
5/N_____
For more information visit:
www.meethue.com
*Hue bridge not included In the box
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>