PHILIPS TAB510X Soundbar User Manual
- September 11, 2024
- Philips
Table of Contents
- TAB510X Soundbar
- Product Specifications
- Product Usage Instructions
- 1. Important
- 2. Help and Support
- 3. Important Safety Instructions
- 4. Care for Your Product
- 5. Care of the Environment
- 6. What’s in the Box
- 7. Your Soundbar
- 8. Connect
- 9. Use Your Soundbar
- 10. Wall Mount
- Frequently Asked Questions (FAQ)
TAB510X Soundbar
“`html
Product Specifications
- Product Name: Soundbar 5000 Series TAB510X
- Main unit dimensions:
- Width:
- Height:
- Depth:
- Remote control: Included
- Input sources: AUX, Optical, HDMI (ARC), Bluetooth
- Power supply: AC adaptor
Product Usage Instructions
1. Important
Read and understand all instructions before using the product to
ensure warranty coverage.
2. Help and Support
For support, visit www.philips.com/support.
3. Important Safety Instructions
Follow safety instructions to prevent electric shock or fire
hazards.
4. Care for Your Product
Clean the product with a microfiber cloth only.
5. Care of the Environment
Dispose of old products and batteries properly to protect the
environment.
6. What’s in the Box
Check the package contents: Soundbar x1, Remote control x1, AC
adaptor x1, Wall Mount Kit x1 (Wall brackets x2, screws x6, dowels
x2), Quick Start Guide/Warranty Card/Safety sheet x1.
7. Your Soundbar
-
Main Unit: Describe main unit features.
-
Remote Control: Explain remote control
functions. -
Connectors: Detail the available
connectors.
8. Connect
-
Placement: Position the soundbar correctly for
optimal performance. -
Connect Soundbar: Instructions for connecting
the soundbar. -
Connect Audio: Guide on connecting audio from
TV and other devices.
9. Use Your Soundbar
-
Power On/Off: How to turn the soundbar on and
off. -
Volume Control: Adjusting the volume
levels. -
Source Selection: Switching between different
audio sources. -
EQ Setting: Adjusting the equalizer
settings. -
AUX/Optical/HDMI (ARC) Audio Source:
Instructions for each audio input source. -
Play Audio Through Bluetooth: Pairing and
playing audio via Bluetooth. -
Auto Standby: Explaining the auto standby
feature. -
Apply Factory Settings: Restoring default
settings if needed.
10. Wall Mount
Instructions for wall mounting the soundbar.
Frequently Asked Questions (FAQ)
- How do I pair my soundbar with a Bluetooth device?
- What should I do if my soundbar does not power on?
- How can I adjust the EQ settings on my soundbar?
“`
Soundbar
5000 Series
TAB510X
User manual
Register your product and get support at
www.philips.com/support
Contents
1 Important
2
Help and support
2
Important safety instructions
2
Care for your product
3
Care of the environment
3
Compliance
4
What’s in the box
4
2 Your soundbar
4
Main unit
4
Remote control
5
Connectors
6
3 Connect
6
Placement
6
Connect the soundbar
7
Connect audio from TV and other
devices
7
4 Use your soundbar
9
Power on/off
9
Volume control
9
Source selection
9
EQ setting
9
AUX audio source
9
Optical audio source
9
HDMI (ARC) audio source
10
Play audio through Bluetooth
10
Auto standby
10
Apply factory settings
10
5 Wall mount
11
6 Product specifications
11
7 Troubleshooting
12
EN 1
1 Important
Read and understand all instructions before you use your product. If damage is
caused by failure to follow instructions, the warranty does not apply.
Help and support
For extensive online support, visit www.philips. com/support to: · download
the user manual and the quick
start guide · watch video tutorials (available only for
selected models) · find answers to frequently answered
questions (FAQs) · email us a question · chat with our support representative.
Follow the instructions on the website to select your language, and then enter
your product model number. Alternatively, you can contact Consumer Care in
your country. Before you contact, note down the model number and serial number
of your product. You can find this information on the back or bottom of your
product.
Important safety instructions
· Read these instructions. · Keep these instructions. · Heed all warnings. ·
Follow all instructions. · Do not use this apparatus near water. · Clean only
with dry cloth. · Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions. · Do not install
near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. · Do not defeat the safety
purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and
a third grounding
2 EN
prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. · Protect the power cord from being walked
on or pinched, particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus. · Only use attachments/accessories
specified by the manufacturer. · Use only with the cart, stand, tripod,
bracket or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over. · Unplug this apparatus during lightning storm or
when unused for long periods of time. · Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped. ·
Battery usage CAUTION – To prevent battery leakage which may result in bodily
injury, property damage, or damage to the unit: · Install all batteries
correctly, + and – as
marked on the unit. · Do not mix batteries (old and new or
carbon and alkaline, etc.). · Remove batteries when the unit is not
used for a long time. · The batteries shall not be exposed to
excessive heat such as sunshine, fine or the like. · The product/remote
control may contain a coin/button type battery, which can be swallowed. Keep
the battery out of reach of children at all times! If swallowed, the battery
can cause serious injury or death. Severe internal burns can occur within two
hours of ingestion. · If you suspect that a battery has been swallowed or
placed inside any part of the body, seek immediate medical attention. · When
you change the batteries, always keep all new and used batteries out of reach
of children. Ensure that the battery
compartment is completely secure after you replace the battery. · If the
battery compartment cannot be completely secured, discontinue use of the
product. Keep out of reach of children and contact the manufacturer ·
Apparatus shall not be exposed to dripping or splashing. · Do not place any
sources of danger on the apparatus (for example, liquid filled objects,
lighted candles). · This apparatus may contain lead and mercury. Dispose
according to local, State or Federal laws. For disposal or recycling
information, please contact your local authorities. For additional assistance
on recycling options, please contact www. mygreenelectronics.com or
www.eiae.org or www.recycle.philips.com. · Where the MAINS plug or an
appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable. · Do not place this apparatus on the furniture
that is capable of being tilted by a child and an adult leaning, pulling,
standing or climbing on it. A falling apparatus can cause serious injury or
even death. · This apparatus should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided. Make sure to
leave a space of 7.8 inches (20cm) or more around this apparatus.
Class II equipment symbol
WARNING: To reduce the risk of fire or electric shock this apparatus should
not be exposed to rain or moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock match wide blade of plug to wide slot,
fully insert.
Care for your product
Use only microfiber cloth to clean the product.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol on a product means that the product is covered by European
Directive 2012/19/EU.
This symbol indicates that the unit has a double insulation system.
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated material within your unit may
cause an electrical shock. For the safety of everyone in your household,
please do not remove product covering. The ‘exclamation point’ calls attention
to features for which you should read the enclosed literature closely to
prevent operating and maintenance problems.
This symbol means that the product contains batteries covered by European
Regulation (EU) 2023/1542 which cannot be disposed of with normal household
waste. Inform yourself about the local separate collection system for
electrical and electronic products and batteries. Follow local rules and never
dispose of the product and batteries with normal household waste. Correct
disposal of old products and batteries helps prevent negative consequences for
the environment and human health.
Removing the disposable batteries To remove the disposable batteries, see
battery installation section.
EN 3
Compliance
This product complies with the radio interference requirements of the European
Community. Hereby, TP Vision Europe B.V. declares that this product is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. You can find the Declaration of Conformity on
www.philips.com/ support.
What’s in the box
Check and identify the item in the package:
Soundbar
x1
Remote control
x1
AC adaptor (for soundbar)
x1
Wall Mount Kit
x1
(Wall brackets x2, screws x6, dowels x2)
Quick Start Guide/Warranty Card/Safety x1 sheet
AAA batteries
x2
2 Your soundbar
Congratulations on your purchase, and welcome to Philips! To fully benefit
from the support that Philips offers, register your soundbar at www.
philips.com/support.
Main unit
This section includes an overview of the main unit.
a – (Volume) Decrease volume.
b + (Volume) Increase volume.
c (SOURCE) Select an input source for the soundbar.
d Switch the soundbar on or to standby.
e Multi-color LED indicator: Source/ Standby
f Remote sensor
4 EN
Remote control
This section includes an overview of the remote control.
a (Standby-On) · Switch the soundbar on or to standby.
b + (Volume) · Increase volume.
c · Skip to the previous track in Bluetooth mode.
d · Play, pause or resume play in Bluetooth mode.
e BT/PAIR · Press to switch to the Bluetooth mode.
· Press and hold to the disconnect the currently connected Bluetooth device
and start a new pairing.
f EQ · Switch between four EQ modes: Movie, Music, Stadium and News.
g AUX · Switch your audio source to the AUX connection.
h · Mute or restore volume.
i · Skip to the next track in Bluetooth mode.
j – (Volume) · Decrease volume.
k HDMI (ARC) · Switch your audio source to the HDMI (ARC) connection.
l OPTICAL · Switch your audio source to the optical connection.
EN 5
Connectors
This section includes an overview of the connectors available on your
soundbar.
a HDMI (ARC) Connect to the HDMI input on the TV.
b SERVICE For software upgrade.
c AUX IN Audio input from, for example, an MP3 player (3.5mm jack).
d OPTICAL Connect to an optical audio output on the TV or a digital device.
e DC IN Connect the soundbar to the power supply.
3 Connect
This section helps you connect your soundbar to a TV and other devices. For
information about the basic connections of your soundbar and accessories, see
the quick start guide.
Note · For identification and supply ratings, refer to the
type plate at the back or bottom of the product. · Before you make or change
any connections,
make sure that all devices are disconnected from the power outlet.
Placement
Place your soundbar as shown below.
6 EN
Connect the soundbar
Connect audio from TV and other devices
Option 1: Connect audio through a digital optical cable
Best quality audio
Using an optical cable, connect the OPTICAL connector on your soundbar to the
OPTICAL OUT connector on the TV or other device.
· The digital optical connector might be labeled SPDIF or SPDIF OUT.
NOTE: The TV audio output must be set to PCM.
EN 7
Option 2: Connect audio through a 3.5mm stereo audio cable
soundbar to the HDMI ARC connector on the TV. · The HDMI ARC connector on the
TV
might be labeled differently. For details, see the TV user manual.
2 On your TV, turn on HDMI-CEC operations.
For details, see the TV user manual. NOTE: The TV audio output must be set to
PCM.
Using a 3.5mm stereo audio cable, connect the AUX IN connector on your
soundbar to the AUX connector on the TV or other device.
Option 3: Connect to HDMI (ARC) Socket
Your soundbar supports HDMI with Audio Return Channel (ARC). If your TV is
HDMI ARC compatible, you can listen to the TV audio through your soundbar by
using a single HDMI cable.
1 Using a High Speed HDMI cable, connect
the HDMI (ARC) connector on your 8 EN
4 Use your
soundbar
This section helps you use the soundbar to play audio from connected devices.
Before you start · Make the necessary connections described in
the quick start guide or the user manual. · Switch the soundbar to the correct
source
for other devices.
Power on/off
Connect the soundbar to the power supply, and the red standby indicator lights
up. Press to power on the soundbar. The soundbar’s indicator lights up white,
and then will show the status of the last selected source. Press again to
switch the soundbar to standby.
Standby: The indicator is solid red.
Volume control
Press +/- (Volume) to increase or decrease the volume level. · To mute sound,
press on the remote
control. · To restore the sound, press again or
press +/- (Volume).
Indicator status Decrease /Increase volume/Mute: Blinking red. Maximum/Minimum
volume: Solid red for three seconds.
· When you press + (Volume) to increase the volume, the soundbar’s indicator
will blink red, and the volume will return to the normal state. The soundbar’s
indicator will show solid red for three seconds when the volume reaches the
maximum.
· When you press – (Volume) to decrease the volume, the soundbar’s indicator
will blink red, and the volume will return to the normal state. The soundbar’s
indicator will show solid red for three seconds when the volume reaches the
minimum.
Source selection
Press on the soundbar repeatedly or the corresponding buttons (BT/PAIR, AUX,
HDMI (ARC), OPTICAL) on the remote control to switch between different
sources.
AUX IN: Solid green
Bluetooth-pairing: Blinking blue
Bluetooth-connected: Solid blue OPTICAL: Solid yellow HDMI (ARC): Solid purple
EQ setting
Press EQ on the remote control to select Music, Movie, News or Stadium mode.
· Music: Soundbar’s indicator blinks white for 3 seconds.
· Movie: Soundbar’s indicator blinks green for 3 seconds.
· News: Soundbar’s indicator blinks red for 3 seconds.
· Stadium: Soundbar’s indicator blinks cyan for 3 seconds.
AUX audio source
You can play audio from an external device (smart phone, tablet, etc.) via a
3.5mm audio cable.
1 Connect the external device to your
soundbar via the 3.5 mm stereo audio cable (not included). Refer to Page 8 for
steps of AUX connection.
2 Press AUX on the remote control.
The soundbar’s indicator turns solid green.
3 Play audio on the external device (refer to
the user manual of the device).
Optical audio source
You can play audio from a TV via an optical cable.
1 Connect the TV to your soundbar via the
optical cable (not included). Refer to Page 7 for steps of OPTICAL connection.
EN 9
2 Press OPTICAL on the remote control.
The soundbar’s indicator turns solid yellow. Note: The TV audio output must be
set to PCM signal.
HDMI (ARC) audio source
ARC (Audio Return Channel) is used in digital audio output of liquid crystal
display television in order to get the optimal synchronous sound quality.
1 Connect the TV to your soundbar via the
HDMI cable (not included). Refer to Page 8 for steps of HDMI (ARC) connection.
2 Press HDMI (ARC) on the remote control.
The soundbar’s indicator turns solid purple. Note: The TV audio output must be
set to PCM signal and ARC on (refer to the manual of the TV).
Play audio through Bluetooth
Through Bluetooth, connect the soundbar with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen
to the audio files stored on the device through your soundbar. What you need ·
A Bluetooth device which supports
Bluetooth profile A2DP and AVRCP, and with Bluetooth version 4.2 or above. ·
The operational range between the soundbar and a Bluetooth device is
approximately 4 meters (13 feet).
1 Press BT/Pair on the remote control to
switch the soundbar to Bluetooth mode. The soundbar’s indicator blinks blue.
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips TAB5105 / TAB5108 to start connection
(see the user manual of the Bluetooth device on how to enable Bluetooth).
During connection, the soundbar’s indicator blinks blue.
3 Wait until the soundbar’s indicator turns
solid blue, and a beep sound will be heard upon a successful connection. If
the connection fails, the indicator blinks
10 EN
continually.
4 Select and play audio files or music on your
Bluetooth device. · During play, if a call comes in, music
play is paused.
· If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
to skip to a
track, or press to pause/resume
play.
5 To exit Bluetooth, switch your soundbar to
another source. · When your switch back to Bluetooth
mode, Bluetooth connection remains active.
Disconnect from the current device:
· If you want to connect your soundbar with another Bluetooth device, press and hold BT/PAIR on the remote control to disconnect the currently conected Bluetooth device.
Indicator status
Waiting to connect: Blinking blue
Connected: Solid blue
Disconnected: Blinking blue
Note
· The music streaming may be interrupted by obstacles between the device and
soundbar; such as wall, metallic casing that covers the device, or other
devices nearby that operate in the same frequency.
Auto standby
This product automatically switches to standby after 15 minutes of button
inactivity and no audio play from a connected device.
Apply factory settings
You can reset your soundbar to the default setting mode. · In AUX mode, press
and hold on the
remote control for 5 seconds. The factory settings is restored.
5 Wall mount
Note · Improper wall mounting may result in accident,
injury or damage. If you have any query, contact Consumer Care in your
country. · Before wall mounting, make sure the wall can support the weight of
your soundbar.
Screw length/diameter Depending on the type of wall mounting, make sure that
you use screws of a suitable length and diameter.
3.0-3.5mm/0.12″-0.14″
4mm/ 0.16″
25mm/0.98″ See the illustration in the quick start guide on how to wall mount the soundbar. 1) Drill two holes on the wall. 2) Secure the dowels and screws in the holes. 3) Hang the soundbar on the fastening
screws.
6 Product specifications
Note · Specifications and design are subject to change
without notice.
Amplifier
· RMS total output power: 30W RMS (+/- 0.5 dB, 10% THD)
· Frequency response: 50 Hz-15 kHz / ±3 dB · Signal-to-noise ratio:
65 dB (CCIR) / (A-weighted) · Total Harmonic Distortion: <1% · Input sensitivity:
· LINE IN: 500 mV +/-50 mV
Bluetooth
· Bluetooth profiles: A2DP, AVRCP · Bluetooth version: 4.2 · Frequency band/Output power:
2402 – 2480 MHz / 20 dBm
Main unit
Soundbar · Power supply: 100-240 V~, 50/60 Hz · Power consumption: 15V/1.6A · Standby power consumption: 0.5 W · Dimensions (W x H x D):
900 x 65.5 x 91 mm · Weight: 1.53 kg · Driver: 2 x full range (52 mm/2″, 4 ohm)
Remote control batteries
· 2 x AAA-R03-1.5 V
EN 11
7 Troubleshooting
Warning
· Risk of electric shock! Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself. If you
have problems using this product, check the following points before you
request service. If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the soundbar do not work. · Disconnect the soundbar from the
power
supply for a few minutes, then reconnect.
Sound
No sound from the soundbar speakers. · Connect the audio cable from your
Soundbar to your TV or other devices. · Reset your soundbar to its factory
settings. · On the remote control, select the correct
audio input. · Make sure that the soundbar is not muted.
Distorted sound or echo. · If you play audio from the TV through the
soundbar, make sure that the TV is muted.
Bluetooth
A device cannot connect with the soundbar. · The device does not support the
compatible
profiles required for the soundbar. · You have not enabled the Bluetooth
function of the device. See the user manual of the device on how to enable the
function. · The device is not correctly connected. Connect the device
correctly (see ‘Play audio through Bluetooth’ on page 10). · The soundbar is
already connected with another Bluetooth device. Disconnect the connected
device, then try again.
Quality of audio play from a connected Bluetooth device is poor.
· The Bluetooth reception is poor. Move the device closer to the soundbar, or
remove any obstacle between the device and the soundbar.
The connected Bluetooth device connects and disconnects constantly.
· The Bluetooth reception is poor. Move the device closer to the soundbar, or
remove any obstacle between the device and the soundbar.
· Turn off Wi-Fi function on the Bluetooth device to avoid interference.
· For some Bluetooth devices, the Bluetooth connection can be deactivated
automatically to save power. This does not indicate any malfunction of the
soundbar.
12 EN
Specifications are subject to change without notice. Please visit
www.philips.com/support for the latest updates and documents. Philips and
Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license. This product has been manufactured by and is sold
under the responsibility of MMD Hong Kong Holding Limited, or one of its
affiliates, and MMD Hong Kong Holding Limited, is the warrantor in relation to
this product.
TAB5105_TAB5108_10_UM_V2.0
EN 13
References
- mygreenelectronics.com
- Philips Customer Service Support - Home | Philips
- Top kèo nhà cái đỉnh cao nhất trong năm 2024
- Philips - United Kingdom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>