Merece K-1069 Spaceship Projection Lamp Instruction Manual

Merece K-1069 Spaceship Projection Lamp

WARNING:

• Keep this Projection lamp out of reach of children under 3 years.
• Do not shine on the face for long time.

Product description

Thank you for purchasing our products. This product is an intelligent star projection lamp,Hope to bring you romantic and good product experience in the process of use; Before using this product, please read this manual carefully and keep it properly for future reference.

Product parameters

Package list

Host button function description

Instructions

Open the package, take out the product, and connect the USB.

1. Turn on
   Press the power button, the light is turned on, the color is blue, the two laser lights are turned on at the same time, and the green light at Breathing mode (Note: From the darkest to the brightest, the time is 10s, and then from the brightest to the darkest, the time is also 10s ). The motor rotates at low speed when it is turned on.

2. Rotate
   When the motor is turned on, the motor is in a rotating state. Press once to adjust the rotation to the second gear, press again to adjust the rotation to the third gear, and press again to stop the rotation.

3. Music
   Click the music button to turn on the built-in music, click again to switch music, there are three music in total, and turn off the music for the last time，Press and hold to adjust the volume.

4. Lighting
   Click to switch the light color, a total of ten combinations. They are blue, red, green, white, red-blue, red-green, blue-green, red-green-blue, red-blue- white, and color switching. Press one last time to turn off the light，press again to turn off the light, then in cycle. Press and hold to adjust light brightness.

5. Special effect lights
   The red light and green light are on at the same time when the machine is turned on, and the green light is in a breathing state. Click to turn on red light only,Press again to turn on only the green light, and press again to turn off the light.

6. Music sync color changing

When the device connect phone by BT, press the Music button, the light will flash with the music.

BT description:

BT name: EGOGO-3

BT connection instructions:

Turn on, the laser projection lamp works, BT is automatically turned on, search for BT EGOGO-3 on the mobile phone, and click EGOGO-3 to match. At this time, the host has a prompt sound and the operation is complete. When the connection is disconnected, the host also has a disconnect prompt sound.

Remote control instructions

• On/OFF: Press once to open, and then press to close. The operationis repeated;
• Music rhythm button: When playing music, the light will flash automatically;
• Timing key: Set the timing shutdown function of the product, which can be set to turn off for half an hour, one hour, one and a half hours, and two hours, and there will be a reminder when you click it.
• Volume adjustment button: adjust the music sound size；
• Music button: Press once to open music, and then click to close music. The operation is repeated (the initial state is off closed state);
• Up and down music adjustment button: Choose build-in music songs;
• Green special effect light button: Press once to turn on the green light, and press again to turn off the green light
• Red special effect light button: Press once to turn on the red searchlight, and press again to turn off the red light;
• Rotation/gear button: The rotation button controls the turning on and off of the LED light, the gear button adjusts the rotating gear (first gear, second gear, third gear);
• LED light adjustment key: adjust the brightness and darkness of RGB light;
• LED light button: Press once to turn on, and then press to switch on lighting effects (ten effects), and then switch to ten kinds After the effect, click again to turn off LED light (the initial state is the first light effect (blue);
• Red and green special effect lights superimposed button:
• Press once to turn on the red and green lights at the same time, press again to turn off the red and green lights at the same time, the operation is repeated, when it is turned on, the green light is in breathing mode (the initial state is on)
• Color gradient button: press once to turn on the color light mode, and then press to turn off the color light mode repeatedly;

Matters needing attention

1. Please make sure that the product does not come into contact with water and corrosive liquid；
2. If you need to clean the product, please make sure to disconnect the power supply；
3. Please use standard 5V 1A power adapter /power bank, and other similar output USB ports. Or may bring damage to the device.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction
FCC ID: 2A4F2-K-1069

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>