TURBRO RK28 Stainless Steel Rotisserie Kit for Most Gas Grills User Manual

TURBRO RK28 Stainless Steel Rotisserie Kit for Most Gas Grills

Product Information

Specifications

• Power Supply: 120V / 60 Hz AC
• Rated Power: 4W
• Rotate Speed: 2-2.4r / min
• Capacity: 20lbs
• Power Cord Length: 59in / 150cm

Product Usage Instructions

Preparation

1. Attach the Motor Bracket on the outside of the grill’s left side (or right, depending on the grill) with M5 Bolts&Nuts(G). Keep screws loose until height adjustment has been set. To set the proper height for your need, Motor Bracket(B) is adjustable, please adjust the bracket: to loosen the screws and move the bracket to the proper hole, then tighten the screws securely.
2. Screw the Spit Rods(C) together. Tighten the spit rod securely with pliers.

Assembly

3. Slide Meat Forks (D) and Rod Bushing (E) through the Spit Rod (C), screw in the thumb screws to hold the forks and rod bushing in place.
4. Mount the Rod Support Bracket(F) directly to the grilling surface, and tighten the wing screws to hold the Rod Support Bracket in place.
   To set the proper height for your needs, Rod Support Bracket(F) is adjustable, please adjust the Support Piece: to loosen the Wing Nut and Bolt and move the support piece to the proper hole, tighten the wing screws securely.

Final Assembly

5. Mount the Motor (A) onto the Motor Bracket (B).
6. Slide the Spit Rod into the Motor socket, ensuring proper alignment with the Rod Support Bracket(F).
7. Check that the spit rod(C) is level and make adjustments if needed on both Motor Bracket(B) and Rod Support Bracket(F).

Operating Tips
Ensure that the spit rod is level for optimal performance. Cook food using the indirect cooking method with the rotisserie.

FAQ

• Q: How do I adjust the height of the Motor Bracket and Rod Support Bracket?
  A: Loosen the respective screws, adjust to the desired height, and then securely tighten the screws.

• Q: What should I do if the spit rod is not level?
  A: Make adjustments to both the Motor Bracket and Rod Support Bracket until the spit rod is level, then tighten securely.

• Q: Can I use the rotisserie for cooking food without using indirect heat?
  A: The rotisserie is designed to be used with indirect heat for optimal results.

Safety Instructions

• Read all instructions before using your rotisserie motor.
• Remove the motor and store it in a dry place when not in use.
• This rotisserie motor is not for use by children.
• Do not touch hot surfaces. Use barbecue mitts.
• To protect against electrical hazards do not immerse cord, plugs, or motor in water or other liquids.
• Unplug the motor from the outlet when not in use, or before cleaning
• Make sure the motor is off before placing it on the motor bracket.
• Do not operate the rotisserie motor with a damaged cord or plug.
• Do not use rotisserie for other than intended use.
• Do not operate the rotisserie motor if it should malfunction.
• Do not let the cord hang over any sharp edge or hot surface.
• Use outdoors only, do not expose to rain.
• If it is necessary to use an extension cord, always select one that has a three-pronged (grounded) power plug that is adequate for the power rating of the unit, that has been approved for outdoor use.
• Do not cut or remove the grounding prong from the rotisserie motor power cord.
• When using an extension cord, make sure it is not in contact with a hot or sharp surface.
• To reduce the risk of electric shock, keep the extension cord connection dry and off the ground.
• Caution must be taken to prevent tripping over the power cord.

Specifications

• Power Supply 120V/60 Hz AC ZP
• Rated Power 4W
• Rotate Speed 2-2.4r/min
• Capacity 20lbs
• Power Cord Length 59in/150cm

Parts List

Part

| Description|

Quantity

---|---|---
A| Motor| 1
B| Motor Bracket| 1
C| 14in Spit Rod| 2
D| 4-Prong Meat Fork| 2
E| Rod Bushing| 1
F| Rod Support Bracket| 1
G| M5 Bolt&Nut| 2

Preparation

Before beginning assembly or operation, make sure all parts are present. Compare parts with the parts list. If any part is missing or damaged, do not attempt to assemble or operate the product. Contact customer service for replacement parts.

• Tools Required for Assembly (not included): Screwdriver, Pliers

Installation

1. Attach the Motor Bracket on the outside of the grill’s left side (or right, depending on the grill) with M5 Bolts&Nuts(G). Keep screws loose until height adjustment has been set.
   To set the proper height for your need, Motor Bracket(B) is adjustable, please adjust the bracket: to loosen the screws and move the bracket to the proper hole, then tighten the screws securely.

2. Screw the Spit Rods(C) together. Tighten the spit rod securely with pliers.

3. Slide Meat Forks (D) and Rod Bushing (E) through the Spit Rod (C), screw in the thumb screws to hold the forks and rod bushing in place.

4. Mount the Rod Support Bracket(F) directly to the grilling surface, and tighten the wing screws to hold the Rod Support Bracket in place.
   To set the proper height for your need, Rod Support Bracket(F) is adjustable, please adjust the Support Piece: to loosen the Wing Nut and Bolt and move the support piece to the proper hole, tighten the wing screws securely.

5. Mount the Motor (A) onto the Motor Bracket (B).

6. Slide the Spit Rod into the Motor socket, make sure the Rod Bushing(E) is resting on the Rod Support Bracket(F) and that the Spit Rod (C) is aligned properly with the rotisserie Motor (A).

Final Adjustment

The spit rod(C) should be level, adjustment will need to be made on both the Motor Bracket(B) and Rod Support Bracket(F). Once the proper Motor Bracket height is determined, use a screwdriver to tighten the Motor Bracket.

Operating Tips

• Tie meat or poultry with a string to make the shape as uniform as possible before putting it on the spit rod.
• Push the rotisserie spit rod through the approximate centre of the food.
• Remount the food if necessary for better balance.
• If foods are too heavy or have irregular shapes, they may not rotate well and should be cooked by the indirect cooking method without using the rotisserie.

Warranty Information

TURBRO provides 1-year limited warranty for FIRESIDE Rotisserie Kit, from the date of purchase, subject to the following conditions and limitations.

WHAT IS COVERED?

• Any alteration or misuse of the product will nullify this warranty.
• This warranty is non-transferable and is effective for the original buyer from the authorized seller only.
• This warranty is limited to the repair or replacement of part(s) proved to be defective in material or workmanship after said defect is confirmed by the manufacturer’s inspection.
• The manufacturer may, at its discretion, fully discharge all obligations concerning this warranty by refunding the wholesale price of the defective part(s).

WHAT IS NOT COVERED?

• Damage caused by the owner when attempting to fix or alter the product themselves.
• Damage caused by misuse, abuse, neglect, alterations, or unauthorized repair.
• Natural depreciation.

HOW TO REQUEST WARRANTY SERVICES?

• To obtain the benefit of this warranty please leave a message online (www.turbro.com/pages/contact-us), or send an email to support@turbro.com. Our customer service will address your issue within 24 hours.

WHAT WILL TURBRO DO?

• Replace the item.
• Refund the item under certain circumstances.

TURBRO

• support@turbro.com
• www.turbro.com
• 323-438-3334

References

• Contact Us – TURBRO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>