savio TWS-06 Wireless Bluetooth Earphones User Manual

Wireless Bluetooth earphones
model: TWS-06
User manual

Thank you for choosing our product!
If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, on social media, or on the website of the store where you made the purchase.
If you want to show off our device on Savio.net.pl FanPage on Facebook, we will be very pleased. If there is something that we could improve on our products,  please  write to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of the purchased device it is recommended to read the whole manual.

Product diagram:

1. Primary button: Turn on/off
2. Microphone
3. Docking station/power bank
4. Charging USB socket
5. Charging Micro USB socket
6. LEDs indicating power bank operation mode
7. Battery level indicator
8. LEDs on the earphones
9. Earphone charging connector

Earphones charging

1. 2.1. Charging of earphones and power bank from an external power source.

2. 2.1.1. Connect the micro USB cable into the charging socket in the power bank.

3. 2.1.2. Put earphones to the docking station. In case when earphones need to be charged, the diodes will be backlit in red color and charging will begin. This will be indicated by the LED indicator next to the power bank charge level indicator.

4. 2.1.3. If the power bank will charge fully, then the indicator will show the value 100 and will go off after a while.

5. 2.1.4. In the case of fully charged earphones, the red backlit will go off.
   Earphones are ready to use.

6. 2.2. Charging headphones using the built-in power bank.

7. 2.2.1. Put earphones to the docking station in the power bank.

8. 2.2.2. Earphones will start to charge automatically, diode placed on the power bank will start to blink in green colour and earphones diode will be backlit in the red colour
   signalizing charging process.

9. 2.2.3. In case when the earphones are fully charged, red backlit will go off and the charging mode will be turned off.

10. 2.2.4. Earphones are ready to use.

Earphones paring

1. 3.1. Hold the primary button placed on each of the earphones.
   You will hear “Power on”.

2. 3.2. Turn on the Bluetooth mode in the transmitting device (e.g. smartphone), then search and choose SAVIO TWS-06 earphones from the list. If the earphones have been paired before with a device, they will connect automatically.

3. 3.3. After connecting with a device LED diodes on the earphones will stop blinking, you will hear communicate „Connected”. Earphones are ready to use.

Primary button description

Pressing and holding the primary button for 3 seconds will cause earphones to turn on/turn off

1. 4.1. During a track playback:
   • Single-click: playback pause/play
   • Double-quick click: select the next song
   • Triple-quick click: a select previous song

2. 4.2. During an incoming call:
   • Single-click: picking up an incoming call
   • Double-quick click: rejecting an incoming call

Charging devices using a power bank

1. 5.1 Connect the USB cable to the charging socket in the power bank(the battery level indicator will show the current state of charge of the power bank).
2. 5.2 Connect the device to be charged.
3. 5.3 After the charging process is completed, disconnect the power bank and the device.

Package content

• Wireless Bluetooth earphones SAVIO TWS-06
• Docking station/power bank
• Charging cable
• 3 pairs of silicone pads
• 2 pair of foam pads for better comfort and fit and soundproof from the outside

Technical specification

• Bluetooth version: 5.0 + EDR
• Range: up to 10 meters
• Total earphones work time: up to 30 h (including power bank)
• Earphones work time on a single charging cycle: up to 3 h
• Charging time: up to 1 hour
• Standby time: up to 120 h
• Impedance: 32 Ω
• Frequency Response: 20 Hz -20 kHz
• Earphones sensitivity: -12 dB
• Sensitivity of the build-in HD microphone: -85 dB
• Power bank capacity: 1200mAh
• Weight of earphones: 2 x 3,45g
• Function keys allow: on/off earphones, next/previous track, play/pause, answer/reject incoming calls.
• Contents of the package: wireless Bluetooth earphones, charging cable, power bank, 5 pairs of earbuds, user manual.

Important information:

• The headphones will switch on automatically after removing them from the power bank -they are ready to connect with a transmitting device (e.g. smartphone).
• Alternately blinking red and blue LED placed on one of the earphones, informs that the headphones are ready to be paired with the transmitting device ( e.g. smartphone).
• In case when LED will not be backlit, it means that the power bank is depleted and it needs to be charged.
• After 5 minutes of idle, the earphones will automatically be turned off To charge the power bank, it is recommended to use a 1A charger, or you can charge it using a USB  port on your computer.
• Charging the power bank does not require placing headphones in it.

Proper earphones placement:

Producent:
Elmak Sp. z o.o.
Ul. Morgowa 81, 35-323 Rzeszów
www.elmak.pl, www.savio.net.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>