savio TWS-04 Bluetooth Wireless Earphones User Manual

savio TWS-04 Bluetooth Wireless Earphones

Thank you for choosing our product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, on social media or on the website of the store where you made the purchase. If you want to show off our device on Savio.net.pl FanPage on Facebook, we will be very pleased.
If there is something that we could improve on our products, please write to us at support@savio.net.pl

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of the purchased device it is recommended to read the whole manual.

Product scheme:

1. Primary button: Turn On/Off, Pause/Play of the track
2. Microphone
3. LED diodes
4. Charging connector
5. Docking station/power bank

Earphones charging

1. Charging of earphones and power bank from an external power source
2. Connect the micro USB cable into the charging socket in the power bank.
3. Put earphones to the docking station (red indicator diode will start to blink in red colour, informing that power bank is being charged). In case when earphones are depleted, the diodes will be backlit in red colour and charging will begin.
4. If the power bank will charge fully, then the red diode backlit will be constant.
5. In case of fully charged earphones, red backlit will go off Earphones are ready to use.
6. Charging earphones with the use of built-in power bank
7. Put the earphones to the docking station in the power bank.
8. Earphones will start to charge automatically, diode placed on the power bank will start to blink in blue colour and earphones diode will be backlit in the red colour signalising charging process.
9. In case when the earphones are fully charged, red backlit will go off
10. Earphones are ready to use.

Earphones pairing

1. Hold the primary button placed on each of the earphones. You will hear “Power On”. Next, you will hear the communicate about earphones being properly connected with each other (“Left, right con-nection”,then ”Pairing”). Earphones are ready to be connected with a transmitting device.
2. Turn on the Bluetooth mode in the transmitting device (i.e. smartphone), then turn on the devices search and choose SAVIO TWS-04 earphones from the list. If the earphones have already been paired with a given device, they will connect automatically.
3. After connecting with a device, a blue diode on the earphones will start to blink. Earphones are ready to use.

Function key description

Clicking and holding the multifunctional key for a longer time will cause earphones to turn on/turn off.

1. During a track playback:
   – Single click: playback pause/play
   – Click and hold: next track

2. During an incoming call:
   – Single click: picking up an incoming call
   – Click and hold: rejecting an incoming call
   – Quick double click: dialling last called number

Package content:

• Wireless Bluetooth earphones TWS-04
• Charging cable
• Docking station/power bank
• 3 pairs of earbuds (2 pairs of silicone pads, 1 pair of foam pads, for better comfort and fit and soundproof from the outside)
• User manual

Technical specification:

• Bluetooth version: 5.0
• Range: up to 10 meters
• Total earphones work time: up to 8 h (including power bank)
• Earphones work time on a single charging cycle: up to 2 h
• Charging time: up to 1 h
• Standby time: up to 120 h
• Impedance: 16 Ω
• Frequency Response: 20 Hz – 20 kHz
• Sensitivity: -38 dB
• Built-in microphone: Yes
• Weight of earphones: 8,2 g

Important information:

• Blinking red diode on the earphone indicates low battery level.
• In case when the button placed on the power bank is not reacting and LED diode will not be backlit, it means that the power bank is depleted and it needs to be charged.
• To charge the power bank it is recommended to use a 1A charger or charge them from Computer USB port.
• Power bank charging does not need for the earphones to be placed in the power bank.
• After 5 minutes of idle, the earphones will automatically be turned off.

Proper earphones placement

This symbol means that in according with European Union directive 2012/12EU, electrical and electronic equipment should not be disposed of with other household waste. The equipment should be sent to a local collection point for this type of waste or to a recycling center. Please contact your local authority for information on available disposal methods. Importer disposal of waste is threatened by the penalties provided for by law in force in the given area. Proper disposal of equipment will help to avoid the negative effects that threaten the environment and human health, in the event of improper utilization.

Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Pro-tection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its regi-stered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 sec- tion 1 and 4 of the GDPR of April 27, 2016.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>