savio TWS-01 Wireless Bluetooth Earphones User Manual
- June 6, 2024
- Savio
Table of Contents
savio TWS-01 Wireless Bluetooth Earphones
Thank you for choosing our product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, on social media or on the website of the store where
you made the purchase. If you want to show off our device on Savio.net.pl
FanPage on Facebook, we will be very pleased.
If there is something that we could improve on our products, please write to
us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of the purchased device it is recommended to read the whole manual.
Product scheme:
- Multifunctional button
- Microphone
- Docking station/power bank
- Headphone charging input.
- Power bank charging micro USB input
- Diodes signalising operating mode of the power bank
- Turn on the button in the power bank
Charging the device:
-
Charging earphones and power bank with the external source of power
-
Plug the USB cable to the charging socket of the power bank.
-
Put earphones into the docking station (red notification light will start to blink, informing about the power bank being charged).
Also the earphones charging will begin (in a case when the earphones are discharged, the diode will lit red). -
If the power bank is fully charged, then the red diode will flash with constant light.
-
When the earphones will be fully charged, red light will go out. The headphones are ready to use.
-
Charging earphones with build in power bank
-
Put earphones into the docking station (power bank).
-
Push the turn on button in the power bank. Diode placed on the power bank will lit blue and earphones will lit red.
-
When the earphones will be fully charged, red light will go out.The headphones are ready to use.
Pairing of the earphones
Earphones Savio TWS-01/TWS-02 can be used together or separately. On Default, earphones will connect with each other. In Case when both earphones are connected, and only one work, get to the point 3.3 and connect both earphones with each other.
-
The pairing of the two earphones
-
Press and hold the multifunctional button on both of the earphones till the diode start to blink read and blue. After proper connection
of the earphones, you will hear information about the connection. -
Turn the Bluetooth in the device (e.g. smartphone), and choose Savio earphone from Bluetooth devices. Then pair them. If the headphones had already been paired with device, they will be connected automatically.
-
After connecting the earphones with the device, the blue diode on an earphones start to blink. The earphones are ready to use.
-
Pairing of one earphone
-
Press and hold the multifunctional button on the earphone till the diode start to blink red and blue alternately.
-
Turn the Bluetooth in the device (e.g.smartphone), and choose Savio earphone from Bluetooth devi-ces. Then pair them. If the headphones had already been paired with device, they will be connected automatically.
-
After connecting the earphones with the device, the blue diode on an earphones start to blink. The earphones are ready to use.
-
Connecting two earphones with each other (in the case when both earphones are on, and only one work).
-
Press and hold the button on each of the earphones. You will hear “Power on”.
-
Make sure, that your earphones are not connected to any other device through Bluetooth i.e. smartphone
-
Press the button twice on one of the earphones. If the earphones will connect with each other, you will hear: “Your headset is connected”.
-
Earphones are now connected with each other and ready to use.
-
Disconnecting of two earphones(in the case when both are working, and you want to use only one)
-
Press and hold the button on each of the earphones. You will hear “Power on”
-
Make sure, that your earphones are not connected to any other device through Bluetooth i.e. smartphone
-
Press the button twice on one of the earphones. If earphones will disconnect with each other, you will hear: “Your headset is disconnected”
-
Earphones are now disconnected and ready to pair the device with one of them.
Multifunctional button description:
Press and hold a multifunctional button for a while cause turning earphones on and off.
-
While playing tracks
– One-time pressing pause/play track
– Press and hold: choosing the next track -
While the phone calls goes in
– Press one time: accepting the call
– Press and hold a button rejecting the call
– Press the button fast twice: will connect with the last dialled number.
Content package
- Wireless Bluetooth earphones TWS-01/TWS-02
- Charging cable USB (M) – Micro USB (M)
- Docking station power bank
- User manual
Additional information:
- Bluetooth version: 5.0
- Range: up to 10 meters
- Working time: up to 2 hours
- Charging time: up to 1 hour
- Stand by time: up to 120 hours
- Build-in microphone: Yes
- Indicator diode: Yes
- While charging the power bank it is highly recommended to use 1A charger, or charge it from a USB port in the computer.
- It is not necessary to put earphones in the power bank while charging.
Important notice:
- While the phone call, when two earphones are connected, only one of them will be active.
- Blinking red diode on an earphone will inform you about the low battery level.
- When the button placed on the power bank will not react, and a LED diode will not be backlit, that means, that the power bank is depleted and it needs to be charged.
This symbol means that in according with European Union directive 2012/12EU, electrical and electronic equipment should not be disposed of with other household waste. The equipment should be sent to a local collection point for this type of waste or to a recycling center. Please contact your local authority for information on available disposal methods. Importer disposal of waste is threatened by the penalties provided for by law in force in the given area. Proper disposal of equipment will help to avoid the negative effects that threaten the environment and human health, in the event of improper utilization.
Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Pro-tection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its regi-stered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementio-ned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities au-thorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s le- gitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 sec- tion 1 and 4 of the GDPR of April 27, 2016.