BRAINZ Wireless Earbuds Instruction Manual
- June 6, 2024
- BRAINZ
Table of Contents
BRAINZ WIRELESS EARBUDS
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE USE
This is what you need:
- USB-C Cable (included)
- Earbuds storage case and earbuds
- USB adapter (not included)
- Mobile phone with Bluetooth
Product description:
No more annoying wires getting tangled but wireless earplugs. Lightweight and
with a good sound experience, music can be listened to for 2 to 3 hours. It
will then take an hour to fully charge. The case has a multifunctional purpose
because it stores and charges the earplugs.
Connection is via Bluetooth and that makes it suitable for almost all
Bluetooth devices. This product has an excellent good price-quality rate and
this translates into a high-quality product with a very good sound level
quality.
This is how to charge it:
Put the earplugs in the specially made storage case. On the side is an input
for a USB-C cable. Connect the considered cable to the case. Then connect the
cable to a power supply. The earbuds are charging when a red light starts to
flash on the other side of the storage case. It takes about an hour for the
earbuds to fully charge. The red light will stop flashing when the earbuds are
charged.
Do not use a charger with a voltage higher than 5 volts. Doing so may cause a
short circuit in the box.
This is how to set it up:
Make sure the Ear Buds are fully charged. Remove the earplugs from the case. Put the earplugs (right and left) in your ears. The earbud makes a sound to let you know you can pair/connect with your phone. The earbuds do this every time you take them out of the case. On your phone, open the Bluetooth menu. Search for a new Bluetooth device. The earbuds will appear on the screen of your device called “BRAINZ Ear Buds H05”. Press the name of the earbuds on your phone to pair. Pairing takes about 8 seconds.
You can now play music through your phone. Tap the side of an Ear Bud once to
pause the music. Tap the left Ear Bud 3 times to go to the previous song. Tap
the right Ear Bud 3 times to go to the next song. If you own a device with iOs
support, you can long touch an Ear Bud on the side to activate Siri.
To increase the volume, tap the right earbud twice. To lower the volume, tap
the left earbud twice. Press your fingers on both earbuds at the same time and
hold for 5 seconds to turn off the power of the earbuds.
When your mobile phones receive an incoming call while listening to music, the
music will be interrupted by an incoming call sound. To pick up or hang up the
phone through the earbuds, tap the right- or left earbud once.
This manual is applicable for items numbers 38510 and 38511. More information
about this product is available on www.brainz-electronics.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>