av-link EMBT1 Metallic Magnetic Bluetooth Earphones User Manual
- June 6, 2024
- Av:link
Table of Contents
Metallic Magnetic Bluetooth® Earphones
EMBT1
Item ref: 100.540UK Black, 100.541UK Rose Gold, 100.542UK Grey, 100.543UK Gold
User Manual
These stylish metallic Bluetooth earphones provide both great sound performance and practicality with their magnetic earbuds and tangle-free ribbon cable. Connect to your smart device via Bluetooth and enjoy up to 5 hours of listening from a single charge. An in-line hands-free microphone and volume/track control give you the ability to listen to and take control of your favorite tunes or make and receive calls on the move. There are 4 modern color schemes to choose from, which match the latest smartphone designs. To keep your headphones looking like new a hard-shell carry case is also provided.
Features
- Bluetooth v4.1 Airhoa chipset with multi-point support allows you to connect 2 devices at the same time.
- Operating distance of up to 10m provides freedom of movement.
- Magnetic earbuds and flat ribbon-style cable for tangle-free storage.
- In-line hands-free microphone and volume/track controls.
- 85mAh Lithium rechargeable battery providing up to 5 hours usage from a single charge.
- Supplied with hard-shell carry case, USB charging lead, and 3 sizes of earbud
- Fully compatible with iOS and Android devices
Technical Specifications
Speaker Driver | 10mmØ |
---|---|
Sensitivity | 98db±3db |
Impedance | 32 Ohms±15% |
Frequency Response | 20hz-20khz |
Bluetooth Version | 4.1 |
Bluetooth Range | Up to 10m (clear line of sight) |
Power Supply | Internal rechargeable 85mAh Lithium-Ion battery |
Charge Time | 2 Hours |
Battery Life: Bluetooth Playback | Up to 5 hours |
Weight: | 7.6g |
Overview
Powering on/off:
Press and hold the MF button until the blue light blinks and the voice message
“power on” is heard. To power off, press and hold the MF button until a red
light blinks and the voice message “power off” is heard.
Pairing with your device:
Press and hold the MF button until alternating blue and red lights blink and
the voice message “pairing” is heard. Select the Bluetooth pairing name “AV:
Link EMBT1” in your device list and when connected a voice message saying
“pairing successful, connected” can be heard. if your device asks for a
pairing code the default setting for these earphones s 0000.
Volume up/next track:
Short press the (+) button to move the unit volume up and press and hold the
(+) button to move onto the next track. volume down/previous track:
Short press the (-) button to move the unit volume down, press and hold the
(-) button to go back to the previous track.
Play/pause:
Short press the MF button to play and pause your current track.
Hands-free operation:
When you receive an incoming call the voice message “incoming call” will be
heard and the voice will then tell you the number of who is calling. To accept
the call, press the MF button once or to reject it press the MF button twice.
Once you have completed your call, press the MF button once to hang up. To
dial the last number stored on your phone, press the MF button twice either
when listening to music or in standby mode.
Charging the device:
To charge the device only use the USB cable supplied and make sure that the
headphones are switched off. Whilst charging a red light will be on, which
will turn blue when they are fully charged. Charging time is normally around 2
hours from flat and the device will give up to 5 hours of playback time from a
single charge.
In the Box
- Bluetooth magnetic earphones 1pc
- USB charging cable 1pc
- Hard-shell carry case 1pc
- pare silicone buds 2 pairs (small and large)
User guide 1pc
FAQ
Q) Bluetooth headphones cannot pair with the device. A) Check that the
headphones are in pairing mode and that the Bluetooth mode is enabled on your
device and in scan mode.
Q) Bluetooth headphones disconnect with my device well within the stated 10m
transmission distance. A) The maximum transmission distance stated is
dependent on a clear line of sight between the headphones and your device. If
there are large metallic objects or other devices transmitting radio or
wireless signals in the vicinity, they can impact on the reception of the
headphones.
Q) Bluetooth headphones won’t switch on. A) Check that the headphones are
fully charged before operation.
Q) Bluetooth headphones won’t connect to my PC. A) Please check that your PC
supports the A2DP Bluetooth profile.
Safety Disclaimer
Do not attempt to service this product yourself as opening or removing covers
may result in fire, electric shock or equipment damage and will also
invalidate the warranty. This product is only designed for indoor use and must
be kept away from water and high humidity along with high temperatures and
direct sunlight.
This product is classed as Electrical or Electronic equipment and should not
be disposed of with other household or commercial waste at the end of its
useful life. The goods must be disposed of according to your local council
guidelines.
Hereby, AVSL Group Ltd. declares that the radio equipment type:
100.540UK/100.541UK/100.542UK/100.543UK complies with Directive 2014/53/EU
The full text of the EU declaration of conformity for 100.540UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100540UK.pdf
The full text of the EU declaration of conformity for 100.541UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100541UK.pdf
The full text of the EU declaration of conformity for 100.542UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100542UK.pdf
The full text of the EU declaration of conformity for 100.543UK is available
at the following internet address:
www.avsl.com/assets/doc/1/0/100543UK.pdf
Errors and omissions excepted.
Copyright© 2020 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
avlink.avsl.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>