Dreamfarm HFMODEL7 Housefarm Indoor Hydroponic System User Manual
- June 14, 2024
- Dreamfarm
Table of Contents
Dreamfarm HFMODEL7 Housefarm Indoor Hydroponic System
INTRODUCTION
Read these instructions carefully before using the appliance. Failure to follow these instructions may result in injuries and equipment damage. The manufacturer is not liable for damages resulting from failure to follow these instructions for use.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved
- Children shall not play with the appliance
- Cleaning and user maintenance shall not be made by children without supervision
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
Recycling reminder
This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
- Up to 28 plants can be grown at a time by hydroponics
- An LED lighting system that automatically turns on and off.
- 5-inch touch screen
- Android Quad Core mainboard
- The water pump automatically turns on and off
- 3 different planting modes: Normal. Leaf and Hurb
- Built-in camera, pH sensor, temperature/humidity
- Smartphone control
- Accessory: 28 pcs of baskets. 28pcs of grow sponges. 28pcs of domes.
The control unit of the house body.
- Temperature Current temperature
- Humidity Current Humidity
- Water tank the amount of water in the water tank
- Air quality Current air quality
- pH Indicates the pH value.
- Cultivation mode Choose from standard, leaf and herbs.
- LED time change Change the set time in the cultivation mode to the desired time.
- LED Power A button to temporarily turn on/off the LED power.
- Settings This button is for a wireless Internet connection.
- The method of use is the same as that of a smartphone.
Components
How to assemble the product
- Install the product on the flat floor
- Fill the top, bottom and water tanks with water.
- After connecting the power cord, press the power button for more than 5
Cleaning Before the Next Planting
Once the crop is harvested, clean up the hydroponics unit to start another
planting.
To clean up the hydroponics system:
- Turn off the power and unplug the cord from the wall outlet.
- Clean up the sponge for reuse (optional) or purchase a new sponge.
- Drain water from the system:
- Plant Producer Hydroponics System:
- Remove the tray covers from all two shelves.
- Beginning with the top tray and working down, use a towel to push the water into the drain.
- Disconnect the water hose and remove the tray.
- Remove the water in the tray.
- Clean the tank(s) and tray covers with warm soapy water from a bucket. Do not pour soap/bleach directly into the reservoir. Bleach can be used to clean the hydroponics system, but it is suggested to use less than a ¼ capful of bleach for every 1-2 gallons of water. If bleach is used, wait an additional 24 hours before filling the tank with water. Rinse thoroughly to remove the soap and bleach (if used).
- Remove all visible green algae that may have accumulated from the previous harvest.
- Dry or let air dry before adding new water.
- Once clean and dry, new water can be added. The recommendation is to let water sit/circulate for 24 hours before adding any plant life to the hydroponics system.
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. FCC
Compliance Information: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT NOTE
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimetres between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.