av-link 500.055UK 2.4G Wireless Keyboard and Mouse Combo User Guide

June 6, 2024
Av:link

av-link 500.055UK 2.4G Wireless Keyboard and Mouse Combo

av-link 500.055UK 2.4G Wireless Keyboard and Mouse Combo
featured

In the Box

  • Wireless keyboard
  • Wireless mouse
  • Nano receiver
  • AA alkaline battery
  • User manual

Installation

Step 1
Open the battery case and power switch to “ON”. Insert the battery. (pay attention to the positive and negative terminals).

Step 2
Remove the receiver.

Step 3
Insert the receiver into your computer’s USB port.
Note: it may take a few minutes for the mouse to be usable as required drivers may automatically install to facilitate usage.

Product features

Stable wireless transmission
Within the scope of 20m of 360 degrees, the 2.4G wireless technology can provide stable connections.

Ergonomic and sleek design
The round chocolate keycaps are developed based on the contact area of the fingers and keycaps, which can provide you with the comfortable experience of input.

Super easy installation
Plug & Play, without installing any additional software.  One small Nano USB receiver can connect both the mouse and keyboard to your computer. Just plug it into a USB port and you’re ready to go.

Silent wireless mouse
Quieter and Easier to click, make you concentrate on your work without disturbing others beside you

Mouse basic parameters
  • Mouse size: 110x 60x 31mm
  • Mouse weight: 62g
  • Suitability: 2 standard buttons and 1 scroll wheel Sensitivity: 1600dpi
  • Mouse return rate: 250Hz
  • Mouse key button life: 3 million
  • Transmission distance: ≥20m
  • Battery: 1AA battery (included)
  • Color: black

Three different power saving modes

  • Mode 1: ≈0.5±0.2mA
  • Mode 2: 1min≈50µA
  • Mode 3: 30min≈30µA
Keyboard basic parameters:
  • Keyboard size: 447.7×135.75×22.1mm
  • Keyboard weight: 467g
  • Keyboard keys: 104Keys+Multi-media keys
  • Keyboard key button life: 10 million
  • Color: black

Three different power saving modes

  • Mode 1: ≈1.5mA
  • Mode 2: 1min≈50µA
  • Mode 3: 30min≈20µA

System requirements

  • IBM or compatible computer
  • Windows: 2000/ME/XP(x64)/Vista/7/8/10
  • Mac OS X (More than V10.4)
  • Usable USB port

Troubleshooting

  1.  Check the battery. If it is drained replace it.
  2.  Disconnect and reconnect the USB dongle to establish a new connection.
  3.  Move to mouse closer to the receiver if it is out of optimum range.

How to reconnect the USB dongle?

Mouse:
Put the battery→turn on the power→Press left, middle, right 3 buttons 5- 8 seconds→let it go, then put the dongle to the computer. (put the mouse near the computer when you connect)

Keyboard:
Put the battery→Press “ESC” and “=” two keys together 5- 8 seconds let it go, then put the dongle to the computer. (put the keyboard near the computer when you connect)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals