av link ST201 Tilt TV Wall Bracket User Manual
- May 15, 2024
- Av:link
Table of Contents
av link ST201 Tilt TV Wall Bracket
Product Information
Specifications:
- Model: ST201, ST401, ST601
- Screen size: Varies (Refer to manual)
- Max. weight load: Varies (Refer to manual)
- Material: Reinforced steel
Product Usage Instructions
Pre-Installation Preparation:
Before starting the installation process, ensure you have the following tools
ready: pencil, tape measure, electric drill, stud finder, and a Philips
screwdriver.
Finding Stud and Marking Installation Area:
For plaster wall installation, use a stud finder to locate thewood stud behind
the wall. Determine the height for installation and ensure it is level using a
spirit level. Use a pencil to mark where the mounting holes will be.
Drilling Holes:
Use an electric drill to create holes that are approximately 5mm in diameter
and 50mm deep at the marked locations for mounting the bracket securely.
Installing the Wall Bracket:
Follow the instructions provided in the user manual for installing the wall
bracket securely on the wall. Ensure all necessary hardware is used during
installation.
Frequently Asked Questions (FAQ):
Q: What should I do if any part is missing from the box?
A: If any part is missing, please return to the retailer or dealer for
assistance in obtaining the missing component.
Q: Can I install this bracket without professional help?
A: While the installation is designed to be easily done, if you are
unsure about any part of the process, it is recommended to seek help from a
professional installer to avoid any damage to property or personnel.
ST201, ST401 & ST601
Tilt TV Wall Bracket
Item ref: 129.550UK, 129.551UK & 129.552UK
User Manual
These brackets are constructed from reinforced steel to allow a screen to be mounted on a wall safely. Designed to be easily installed and supplied with all required installation hardware.
| Model | ST201 | ST401 | ST601 |
|---|---|---|---|
| Screen size | 17” – 45” | 26” – 55” | 32” – 70” |
| Max. weight load | 20kg | 30kg | 35kg |
Caution:
Please read this manual thoroughly to avoid damage to property or personnel.
If unsure of any part of this manual please refer to professional installer
for help:
- This product contains small components that could pose a choking hazard if swallowed, please keep out of reach of children.
- This product is designed for mounting on wall studs or concrete wall. Always ensure the mounting surface will be capable of withstanding the combined weight of the TV bracket and TV, reinforcement may be required for aged or weak walls.
- Safety gear such as gloves and safety goggles must be worn during the installation. A minimum of two people are required throughout the installation, failure to do so may result in injury or damage.
- This product is design for indoor use only. The bracket must be inspected at least every two months for loose joints or aged parts.
Contents
Please check all contents listed below are included inside the box. If anything is missing please return to the retailer or dealer.
For this installation you will also require a pencil, tape measure, electric drill, stud finder and a Philips (cross) screw driver.
Step 1 – Fixing wall bracket
For concrete wall installation first of all work out the height of the
installation and ensure it is level using the spirit level. Use a pencil to
mark where the mounting holes will be and use an electric drill to drill a
hole that is around 10mm in diameter and 50mm deep. Insert the wall plugs into
the holes and install the wall bracket as follows.
For plaster wall installation first of all find out where the wood stud is behind the wall using a stud finder. Then work out the height of the installation and ensure it is level using the spirit level. Use a pencil to mark where the mounting holes will be and use an electric drill to drill a hole that is around 5mm in diameter and 50mm deep. Install the wall bracket as follows.
Step 2 – Fixing TV bracket to the screen, please use plastic spacer if the back of the screen is uneven.
Step 3 – Hook the TV bracket on to the wall mount and gently rest the TV against the wall as shown below. Use a screw driver to fix the locking screw in until the TV is completely fixed to the bracket.
Errors and omissions excepted.
Copyright© 2024 AVSL Group Ltd, Unit 2 Bridgewater Park,Taylor Road, Trafford
Park, Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D North Point House,North Point Bus. Park, New Mallow
Road, Cork, Ireland
129.550UK, 129.551UK & 129.552UK User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>