Lenco SB-080 90cm Sound Bar Instruction Manual

Lenco SB-080 90cm Sound Bar User Manual

User manual – 90CM soundbar with 80W RMS, Bluetooth, built-in subwoofer and HDMI (ARC)

Version: 2.0

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The apparatus can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35° C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit could maybe not work properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from rodents. Rodents enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the usb memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the apparatus.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this apparatus.

22. Never place this apparatus on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor :

    • If any trouble occur, disconnect the AC power card and refer servicing to qualified personnel.
    • To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    •  Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin / cell batteries:
    Warning:

    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    •  [The remote control supplied with] This product contains a coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    •  If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Soundbar Controls and Connections

Remote Control

1. Standby mode for power on/off.
2. PAIR: Connect or disconnect to the pairing device. (Press the button more than 2 seconds).
3. DIM: Brightness control. This button will not work in standby mode
4. Loop playback (this function is for USB).
5. Volume +
6. Pre button: Previous song (this function is for bluetooth mode only).
7. Volume –
8. -10: Backwards ten songs (this function is for BT mode only).
9. Treble –
10. Bass –
11. MUSIC: Select the MUSIC EQ preset.
12. NEWS: Select the MUSIC EQ preset.
13. MUTE mode.
14. INPUT: AUX/OPT/USB/BT selection
15. RESET: Reset all sound bar volume levels and switch EQ back to music setting. Press and hold this button for 2 seconds.
16. Stop button: Press to stop. (this function is for USB mode only).
17. Next button: Next song. (this function is for USB and BT mode only).
18. +10: Forwards ten songs. (this function is for USB mode only).
19.  Treble +.
20. Bass +
21. MOVIE: Select the MOVIE EQ preset.
22. 3D: Select the 3D EQ preset.
23. Play/Pause (this function is for USB and BT only).

Remote Control Battery Replacement

A. Remove the battery compartment cover, by sliding it downwards.

B. Insert 2 AAA batteries according to the marking inside the battery compartment.

C. Close the compartment, by sliding it upwards.

Operating INSTRUCTIONS

Using the soundbar

1. Switch on the soundbar by using the power button on the soundbar or by using the Standby button on the remote control. After switching it on, the default input mode will Be shown on the display
2.  Input modes can be changed by pressing the power button again or by using the INPUT button on remote

Below are input mode names appearing in the soundbar display:

Note: USB input mode is not available in the source selection. It will be available only after inserting a compatible USB Drive (appears as US in display)

Pairing Mode

Connect

1. Plug in the power cord and the display will lit up, display shows [–] which means the unit is in standby mode

2. Switch on the soundbar by pressing the power button and then change the input mode to Bluetooth. The display will show [bt]. If no device was previously paired, the display will show a blinking [bt].

3. Search for new Bluetooth devices on your Bluetooth audio player (for example: smartphone/tablet/computer). Choose the device named „Lenco SB-080‟ from the list of the detected devices. If a password is requested just
   type 0000. The blinking [bt] will stop flashing and a beep will sound when the sound bar is successfully paired.

4. The soundbar will remember the last paired device and reconnects the next time you switch on the soundbar in Bluetooth mode. (The previously paired device must be in the neighborhood of the sound bar with the Bluetooth function activated)

Note: When your device was unable to detect the soundbar while pairing, please restart the bluetooth mode and try to pair again.

Disconnect

Go to the Bluetooth settings of your Bluetooth audio player, select „Lenco SB-080‟ from the list of devices and choose the option „disconnect‟.

Note: You have to disconnect from your Bluetooth audio player if you want to connect a different BT player.

AUX Mode

1. After switching on the soundbar, change to AUX input mode by pressing the „input‟ button on the remote control until [AU] is shown on the display.
2.  Plug in the 3.5mm AUX cable to the AUX connector on the soundbar and start playing from the connected music device.

USB Mode

The USB port can be found on the right side of the soundbar. You can use USB memory sticks with music files in MP3 format.

1. Plug in the USB drive into the USB port.
2. The music files on the USB drive will play automatically and the display will show [US]
3. You can use the remote control to play/pause/stop and play next/previous track.

HDMI Mode

1. The Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your soundbar by using a single HDMI cable
2. Connect a high speed HDMI cable from the HDMI TV (ARC) connector on the soundbar to the HDMI ARC connector on your TV. The HDMI ARC connector on the TV might be labelled differently. (HD) will display on the soundbar
3. On your TV, select source as HDMI (ARC) mode. For details on the HDMI (ARC) mode, consult your TV user manual.

Optical Mode

Using an optical cable, connect the OPTICAL connector on the Soundbar to the OPTICAL OUT connect on the TV or other device. (OP) will display on the soundbar.

Troubleshooting

Technical Specifications

Guarantee

Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send
products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to a particular situation. No legal right or entitlements may be obtained from the description made in this manual.

CE-Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.

The declaration of conformity may be consulted via
techdoc@commaxxgroup.com

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Service

For more information and helpdesk support, please visit the Lenco Website:
www.lenco.com

Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>