GLOBAL INDUSTRIAL Non-Contact Digital Infrared Forehead Thermometer Instruction Manual
- June 6, 2024
- GLOBAL INDUSTRIAL
Table of Contents
GLOBAL INDUSTRIAL Non-Contact Digital Infrared Forehead Thermometer
Customer Service: US: 1-800-645-2986
WARNING
Read entire manual before operation. For additional questions or concerns, contact Global Industrial Customer Service at 1-800-645-2986 or visit www.globalindustrial.com.
- Product to be used in ambient temperatures between 60°-95°F (16°-35°C).
- DO NOT use this product in an environment with a relative humidity greater than 93%.
- DO NOT place this product too close to the electromagnetic range, (examples: radio, mobile phone, etc.).
- DO NOT expose to excessive heat or water.
- DO NOT use if product is damaged.
- Sweat, hair, hats, or other foreign matter on the forehead can affect the accuracy of the measurement.
- Ensure the measurement distance is within 1 to 2 inches.
- Contact Global Industrial if there are any problems with the thermometer, DO NOT attempt to do any repairs yourself.
- Keep this manual for future use.
Specifications
| Temperature Range: | 91.4°-109.4°F (33°-43°C) |
|---|---|
| Power Supply: | DC 3V – 2 AAA batteries (not included) |
| Measuring Distance Range: | 1-1/6 – 2 in. |
| Response Time: | 1 Second |
| Memory Data: | 20 Records |
| High-Fever Warning: | 5 Beeps |
| Display: | Blue LCD |
| Low Battery Alarm: | Yes |
| Product Weight: | 1/4 lb. (excluding batteries) |
| Product Dimensions: | 6.1″L x 3.5″W x 1.7″H |
| Certification: | FDA |
| Ambient Temp. Working Range: | 60°-95°F (16°-35°C) |
Component Identification
- LCD Display
- Function Button
- “+” Button
- “-” Button
- Infrared Sensor
- Measurement Trigger
- Handle
- Battery Cover
Operation Instructions
-
Insert batteries – Open the battery cover and insert (2) AAA batteries (not included) into the bottom of the thermometer. Close the battery cover.
-
The thermometer will beep.
-
Tap the FUNCTION button to switch between “body” and “surface” temperature modes.
-
Press the MEASUREMENT TRIGGER to measure forehead temperature. In order to get an accurate measurement, ensure the thermometer is 1 to 2 inches away from the forehead.
-
Press “+” or “-” buttons to review the last 20 measurement results.
-
Press and hold the FUNCTION button for 3 seconds to access the different function modes below. Tap the FUNCTION button again to scroll through the following modes:
- F1: °F or °C unit mode – Press “+” or “-” button to select.
- F2: Max. temperature alarm mode; press “+” or “-” button to select.
- F3: Display data offsetting mode; press “+” or “-” button to select.
- F4: Buzzer sound activate/deactivate mode; press “+” or “-” button to select.
Note: Pressing the MEASUREMENT TRIGGER button will exit during any set up mode.
-
The thermometer will automatically shut-off when idle and will turn back on by pressing any button.
Product Maintenance
Note: Be sure not to damage and use extra precaution when cleaning the infrared sensor.
- Do not use abrasive cleaners to clean this product.
- Do not submerge the product into water or other liquids.
- Keep the product in a dry place to avoid dust, pollution and direct sunlight.
- Clean regularly using a dry soft cloth. If needed, use a damp cloth with water or a neutral detergent to clean, then wipe dry with a clean cloth.