ZOSI C302 Wireless Security Camera System User Guide

ZOSI C302 Wireless Security Camera System

Gallery & Specs

1.1 NVR

1.2 Wireless IP Camera

System Connection

2.1 Connect NVR to the Internet

•  Connect NVR to router using a network cable.
• Connect monitor to NVR via HDMI or VGA port.
•  Connect the included USB mouse to the top USB port of NVR.
• Connect NVR to 12V power supply.
•  After the system starts, pair and connect IPC and camera to the system (maximum support 8 channels).
• The monitor will show the real-time monitoring picture of the camera.

A: Camera Installation Diagram

B: How to test the network status of NVR?

• Right-click Mouse > Go to Main Menu > Setting > Network
• Tick ‘Obtain IP address automatically

Click ‘Test’, if ‘OK’ is displayed, tick ‘DHCP’ and apply, the device will automatically assign the corresponding network segment and IP address. After clicking Test, if the page is displayed successfully, it is successfully connected to the network.

NOTE: Please make sure that the DHCP of the connected router is enabled at the same time.

C: WiFi Setup

Right-click the main interface – Main Menu – Setup – Network – Wireless Network, default setting and apply.

2.2 Download ZOSI Smart App

2.3 Run the App

1. : Install the free Zosi Smart App.
2.  Click Register and enter your email box to get the verification code, click next to set up password and save it, registration completed.
3. Login the App, get into the main interface (My Device), click”+”in the upper right corner to add devices.
4.  Select ‘DVR’ – ‘Wireless recorder’
5. Go back to the Device list > Tap the device > Tap “+” to select channel (all selected) > Tap Confirm to start live streaming.

2.4  2-Way Audio

Support two-way voice intercom through Zosi Smart APP. The camera microphone is at the upper right corner of the lens, speaker is at the behind of the camera.

AVSS PC Client

3.1 Install AVSS on PC

Get the AVSS software from www. zositech.com or from your agent. Double-click the icon AVSS to open, select the language and click Login. Note: You can log in with the default username and password, or register a new account. The user name is the account an password registered on the App in 2.3.

3.2 Device Management

Click the Add Device button in the device list to add/edit/configure/search for the device.

3.3 Live View

Select a channel to watch live streaming.

3.4 Video Playback

Select ‘Playback’, select device, channel, date, time, click the play button to start replaying recorded video.

Add Device

4.1 Add IPC to wireless camera system

•  Connect IPC and NVR in the same wireless network.
•  Right-click the mouse on the live channel page and get the main menu.
•  Click IPC Channel Config to enter the configuration page.
• Click the search button to search for IP cameras.

• Tick the IPC channel, click WiFi add.

• The IPC device is successfully added and it can be displayed in live view channel and operated.

Hard Drive/ Micro SD Card

Some camera kits may not contain hard drives, depending on the camera kit you purchase. This kit support most 3.5”or 2.5” HDD.
Note: Please skip this step if your recorder has a pre-installed hard disk.

1. Power off the NVR, unscrew and remove the top cover of recorder.
2.  Connect the power cable and data cable of the hard drive to the corresponding ports in the recorder. (As shown in figure).
3. Put the hard disk in the recorder. All wires should cross up over the hard drive.
4. Hold the hard disk and the NVR, gently turn it over and line up the holes on the hard disk with the holes on the NVR. Use a Phillips screwdriver, screw the included screws into the holes. Assemble the cover.
5.  Insert the Micro SD card into the card slot on recorder. You need to format the hard drive or Micro SD card before recording Steps: Right click mouse> Main Menu> Hard Disk Management> select the Hard Disk> Format> Apply

Video Record

6.1 Motion Detection

Set motion Detection, NVR will only record when motion or movement is detected. Right click the mouse > Main Menu > Setup

Alarm > Motion detection. The system starts recording when motion is detected by the camera, and the captured picture will show at the bottom left corner. Select camera: tick the channel you want to record on motion detection

6.2 Human-form Detection

The system can trigger alarms and record when human-form is detected. Motion detection and human-form detection can significantly reduce false alerts.

6.3 Siren and Light Alarm

You can set up siren and light alarm. Five alarm modes: strong siren and light alarm, light siren and light alarm, strong siren alarm, light siren alarm, and strong light alarm. Three Night vision modes: full-color night vision, black and white night vision, and smart night vision. You can freely switch three- night vision modes. Three alarm types: motion detection, human-form detection and motion detection plus human-form detection.

6.4 Video Playback

Go to Main Menu > Search, the system presents as follows:

Search the video you want by time or event to play.

Previous Record: move to last recorded event Next Record: move to next recorded event Fast Forward: video can be played at different speed, from 1/4 times to 16 times. Rewind: Video play can be rewinded at 1 time, 8 times, 16 times and 32 times. Screen Display Mode: both single-screen and multi-screen are available. You can choose how many channels you want to playback at the same time. Channel without records presents blank screen.

6.5 Video Backup

Insert USB flash drive> right-click the mouse> enter the Main Menu> Hard Disk Management> USB flash drive detected> return> Backup> select Channel and Time period> Search> select the video file you want to back up> click Backup> backup complete.

Live Video Display

You can see a picture display on the monitor normally, as the 4-channel picture shown in the figure.

FAQs

Q:Why can’t I search for devices when adding cameras?
A:Make sure that the device and the mobile device are on the same LAN, otherwise please enter the device ID manually.
Q: Why can’t my device connect to the network?
A: Please check:

• Is the device connected to the Internet?
• Is the router working properly?
• Is the router’s DHCP server open?

Q: Why can’t I find the video files?
A: Please check:

• Is the hard drive broken?
• Is the search period valid?
• Whether the system time is correct.

Q: Why the monitor screen cannot display for some channels?
A: Please check whether the camera has been added to NVR.
Q: Why can’t I watch the recording by entering the device password?
A: Please confirm whether the correct device password is entered. It is recommended to keep the password.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>