Hiwill D20 Soundbar User Manual

User Manual

D20

Model Number: D20

Product Name: D20

1 ACCESSORIES LIST

Soundbar

Power Adaptor    Stereo 3.5mm to 3.5mm Audio Cable

ARC Cable          Digital Optical Cable

Remote Control        User Manual

2 CONNECT TO THE TV VIA ARC

1. Step 1
   Connect one end of the ARC cable to the ARG port on the back of your TV.

2. Step 2
   Then connect the other end into the ARC port of the soundbar.

3. Step 3
   Press “INPUT” button on the remote control to switch “ARC” input.

If there is no sound, try setting the TV audio output to PCM:
TV Settings ≥ Home ≥ Settings ≥ Sound ≥ Digital Audio Output PCM

Note: Please turn on the “CEC” function on your TV.
When ARC is connected, your TV remote control can control the soundbar and TV simultaneously:
(1) Turn on/off    (2) Adjust the volume

CEC:          Fire TV Synchronous Boot Time ~ 12s, synchronous shutdown time ~ 5s.

Attention: There are slight differences between different types of TV.

3 CONNECT TO THE TV VIA OPTICAL / AUX

OPTICAL

OPTION 1: OPTICAL

(1) Make sure the TV’s port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
(2) Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.

Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.

AUX

OPTION 2: AUX

(1) Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
(2) Not support AUDIO IN port on TV.

Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to other mode.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings ≥ Home ≥ Settings ≥ Sound ≥ Digital Audio Output ≥ PCM

4 CONNECT TO BT

(1) Press the “INPUT” button on the soundbar or “BT” button on the remote control to enter BT pairing mode.
(2) Open your phone’s BT settings, find and select “HIWILL-D20” to connect the soundbar.

5 CONTROL PANEL

(1) “ /+”: Volume Up/Next Music
(2) “M”: MODE
Press to switch channels: H-ARC – OPT(OPTICAL) -BT -AUX -USB.
Hold for 3 seconds to disconnect the current device and connect to anew device manually on your mobile /pc/ TV.
(3) “ ”: Play/Pause
(4) “ ” : Power Button
Press to power on/Hold for 3 seconds to power off.
(5) “ ”: Volume Down/Last Music

1. Working State, no operation, automatic flameout after 30 seconds.
2. In standby mode, the display screen does not show any numbers and goes black directly.
3. Press and hold the MUTE key to forcefully clear BT, and press and hold to reconnect to BT.

6 REMOTE CONTROLS

(1) “ ”: Power Button
Power Button: Press to power on/ Hold for 3 seconds to power off.

(2) “ ” : Mute / Recover the volume.
Long press longer than 5 seconds to clear BT.

(3) “VOL+”: Volume Up

(4) “ ” Previous:
For BT and USB mode only: Skip to previous track.

(5) “ ” Next:
For BT and USB mode only: Skip to next track.

(6) “ ” Play/Pause: USB\BT status, press this button for “Play” or “Pause” function.

(7) “VOL-”: Volume Down

(8) “NEWS”: Press to switch to NEWS mode.

(9) “MUSIC”: Press to switch to MUSIC mode.

(10) “MOVIE”: Press to switch to MOVIE mode.

(11) “INPUT”: When working, simply press this key for BT\USB\AUX\OPT\ARC” input options.

(12) “BAS+”: Press to enhance bass level.

(13) “BAS-”: Press to reduce bass level.

(14) “3D”: Press to switch the 3D surround effect.

(15) “TRE+”: Press or hold to enhance treble level.

(16) “TRE-”: Press or hold to reduce treble level.

7 PLACEMENT OPTIONS

Note: The soundbar should be placed at or near ear level.

1. The Soundbar can be placed under the TV.

8 SPECIFICATIONS

Dimensions and Weight

Soundbar| 900(L) x 124(W) x 64(H)mm
Packaging| 990(L) x 164(W) x 112(H)mm
Netw eight| 2.6kg
Groos eight| 3.6kg

FCC WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>