CREATE UK Air Pure Studio Fan Cleaner without Blades with Hepa H13 and WiFi User Manual

CREATE UK Air Pure Studio Fan Cleaner without Blades with Hepa H13 and WiFi User Manual

WELCOME

Thank you for choosing our bladeless fan. Before using the appliance, and to ensure the best use, carefully read these Instructions.

The safety precautions enclosed herein reduce the risk of death, Injury and electrical shock when correctly adhered to. Keep the manual In a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these Instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.

SAFETY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• To avoid fire, electric shock, and injury you must meet the following requirements. Otherwise, please follow the respective national and local electricity regulations.
• Children, the elderly and people with disabilities or without experience should be looked after by a responsible person when using this product. Children should be supervised to ensure that they do not play with the fan as a toy.
• Please use a separate outlet according to the current / voltage of the fan. Do not use a multi-purpose socket for simultaneous use with other electrical devices.
• If the fan does not work due to a damaged power cord, tum off the power and ask a qualified person for repair.
• Do not pull out the plug by the cable. Pull out the plug and do not grip the cable.
• Do not operate the fan with a damaged cable or connector. Please contact customer service to replace or repair the cable if the cable is damaged.
• Keep the cable away from any heat source.
• Do not run the cable under carpets, do not cover it with carpets or similar covers. Route the cable outside the traffic area to avoid tripping the cable.
• Turn off all controls before pulling the plug and pull the plug out of the socket If you are not going to use the device for a long time.
• Do not place any objects on the air Inlet or outlet. Make sure that the ventilation openings are free of dust. lint. hair and other obstacles that could impair the air flow.
• The fan should be set up dry on a horizontal platform and should not be near any heat sources, corrosive air and moisture. The fan should be kept a distance of 150 mm around to ensure good air circulation.
• Do not use the fan outdoors or on a wet surface.
• Do not immerse the fan, power cord, or plug in water or other liquids to avoid danger. The use of an extension cord is not recommended unless it has been tested by a qualified person.
• Please do not use an air cleaner or similar product right next to the fan.
• Do not use any cleaning agents or lubricants for this fan and pull out the power plug before cleaning, transporting and servicing the device.

PARTS LIST

1. Air outlet
2. Air duct
3. Top cover of air purifier filter
4. Air inlet
5. Touch screen button
6. Base
7. Host
8. Power connection

REMOTE CONTROL BUTTONS

1. Press the Strong wind mode button on the remote control. The display will show H and the wind strength will increase. Press again to exit strong wind mode. (You can also exit the current mode by pressing the+ or – buttons.)
2. The device can be switched on and off by pressing the ON & OFF button.
3. Press the Timer button on the remote control to set from 1 to 8 hours. After the timer function is set, other functions can be used normally. When the device is turned off, the timing setting is also cancelled.
4. Press the Oscillation button on the remote control to switch on the oscillating function. This fan can swing 80′ left and right. Press this button again to end the shaking process.
5. Press this key to turn on the UV germicidal lamp, the display shows U. When operating the fan after turning off the screen, first activate the display to show U, and the gear position will be shown after 5 seconds. Press again to turn off the UV germicidal lamp.
6. Press the + button on the remote control to increase the air volume. Press the· button to decrease the air volume There are 9 speed settings.

OPERATING INSTRUCTIONS OF REMOTE CONTROL

• Battery replacement method: Please note the battery direction.
• It is not a toy. Keep out of rich from children. If batteries are swallowed, please consult a doctor.
• The remote control should be pointed at the device signal receiver on the display to maximize the remote control signal.
• This fan may respond to the remote control of other devices.
• If you use the remote control of this fan, other devices may respond. This is due to the overlapping frequencies of the remote control. There is no quality problem in the product itself. To avoid misuse, keep the remote control away from other electrical devices during operation.

HOST OPERATION

• Wind tilting setting:
  Set the wind outlet after fan has stopped.
  Hold fan body with one hand and set the wind outlet 15 • before and after.

• Switch on and off:
  Connect the power supply. The LEO display lights up and the machine goes into standby mode. Click the host power button, it will beep once and the fan will start. Press and hold the power button for 2 seconds, it will beep twice and the fan will stop running after you release the button.

• Set the air volume:
  When the host is operating, click the button to adjust the air volume from 1 to 9.

• Oscillation:
  When the host is operating, press and hold the screen touch button for 1 second. It will beep once and the fan starts oscillating.
  Press and hold the screen touch button again for 1 second. It will beep once and the fan will stop oscillating.

INSTALLATION

• Please use the fan on a flat platform. Do not place the fan in an unstable place, such as an inclined or soft surface, to avoid damage or malfunctions caused by the fan tipping over.
• Avoid blocking the air inlet when using. Stay away from the curtains to avoid objects blocking the air inlet and the fan not working.
• Do not place any objects within 30 cm of the air outlet, otherwise the blower effect will be impaired.

FILTER REPLACEMENT

• This machine is equipped with an air cleaning filter.
• Before using the fan, the filter should be installed in the fan so that the air can be cleaned.
• Installation and replacement method of air cleaning filter:

RESETTING THE FILTER ALARM

• The fan has a memory function. After a total of 720 hours of operation, the display lights up with an indicator light when turned on, it will beep 5 times and the gear is displayed after 5 seconds.
• After replacing the filter screen, the power button on the remote control device can clear the alarm for 5 seconds and the operating time is reset again.

UV STERILIZATION FUNCTION

• When the fan turns on the UV sterilization function, the UV lamp inside the fan can effectively eliminate staphylococcus in the air.

APP CONNECTION

CREATE HOME application is available for Android and iOS (look for the app on Google Play or App Store or scan the QR code below). Depending on the provider, there may be costs involved in downloading the app.
This appliance allows you to operate the appliance via your home network. A prerequisite is a permanent WiFi connection 2.4 Ghz to your router and the free app CREATE HOME.https://apps.apple.com/es/app/ikohs- home/id1479200310https://play.google.com/store/apps/details?id=com.ikohs.home

How to connect to the app

1. Install the CREATE HOME app and create a user account.
2. Set up a login password and log in the app.
3. Click on “Add device (+) and then on the category corresponding to your device.
4. Follow the instructions on the app and click on confirm when the indicator light is blinking rapidly.
5. Enter your WiFi network password and confirm. Then you will be redirected to your WiFi settings on your mobile phone. Look for a network named as your device and connect to it. After that, go back to the previous step to press “Next.
6. While connecting, make sure your router, mobile phone and device are as close as possible. After that, your pet feeder will be successfully added to your CREATE HOME APP.

MAINTENANCE

• Before maintenance work, pull the mains plug out of the socket.
• Surface: Gently wipe the fan surface with a soft, dry cloth. If the surface of the fan is dirty, dilute it with a mild detergent and wipe the surface of the fan with a soft cloth. Then wipe them off with a dry, soft cloth.
• Air inlet and air outlet: Use a soft brush or vacuum cleaner to clean the dust at the air inlet a11d outlet. If there is too much dust, this can affect the fan.
• Remote control: Gently wipe the surface of the remote control with a soft, dry cloth. If it will not be used for a long time, please remove the button battery in the remote control.
• Power plug: Please clean the power plug with a soft, dry cloth.
• Storage:
  • After the fan has been cleaned, it can be stored in a plastic bag.
  • Keep away from vibrations and electrical devices with cooling / heating function.
  • Do not expose it to direct sunlight, hot and humid places.
  • Keep out of the reach of kids.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres In separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>