DATALOGIC Memor K Mobile Computer with 1D/2D Imager User Guide
- June 6, 2024
- DATALOGIC
Table of Contents
MEMOR™ K
QUICK START GUIDE
Mobile Computer with 1D/2D Imager
OUT OF THE BOX
The Memor K package contains:
- Memor K Device
- USB Type-C Cable
- Rechargeable one-piece battery pack
- Quick Start Guide
- Safety & Regulatory Addendum
- Warranty Addendum
Remove all the components from their packaging; check their integrity and
compare them with all the packing documents.
C AUTION: Keep the original packaging for use when sending products to the
technical assistance center.
Damage caused by improper packaging is not covered under the warranty.
GENERAL VIEW
| 
---|---
| 
BATTERY INSTALLATION
-
Slide the battery cover switch to the unlock position (right side); lift and remove the battery cover
-
Insert the battery pack into the slot, top first, and press it into place.
-
Insert the battery cover (bottom side first) and press it into place; slide the battery cover switch to the lock position (left side).
SD CARD INSTALLATION
We recommend the use of Single Level Cell (SLC) industrial-grade microSD or
microSDHC memory cards for maximum performance and durability. Contact the
sales support team to select the memory card for your device.
NOTE: If you use your MicroSD/SDHC card as portable storage, format it to
Fat32 before installation.
To install the memory card:
-
Remove the battery cover (see “Battery Installation”, step 1).
-
Remove the battery.
-
Insert the memory card into the slot with the written part upward.
-
Replace the battery and the battery cover (see “Battery Installation”, steps 3 and 4).
CHARGING INSTRUCTIONS
The battery pack is not initially fully charged. After installing the battery,
charge it with the power supply or with the single slot dock for a minimum of
3.5 hours.
During the charging process, the charging LED positioned at the top left side
of the display glows red constantly. Once the charging process has been
completed, the charging LED glows green constantly.
NOTE: Using the device while the battery is charging will significantly
increase the time required to reach a full charge.
NOTE: The Memor K may get warm during charging. This is normal and does
not mean a malfunction.
CAUTION: Ensure all the components are dry before performing any type of
connection to the Memor K. Any damage caused by the use of wet equipment is
not covered by warranty.
Charge with the USB
Use the provided USB Type-C cable in conjunction with the power supply
adapter (p/n 94ACC0316) to charge the device from a power outlet.
CAUTION: Use only the Datalogic power supply 94ACC0316 to power the Memor
K.
Charge with the Single Slot Dock
Insert the device into the dock with the screen facing front and the head
facing up.
CAUTION: Use only a Datalogic approved power supply to power the single
slot dock.
NOTE: For information on the single slot dock refer to the Quick Start
Guide included in the dock’s box.
TURN ON/OFF THE DEVICE
To turn on the Memor K, press and hold the Power Button for at least 3
seconds.
To turn off the Memor K, press and hold the Power Button until the Reboot
Options Menu appears to end then tap Power Off.
Force Restart
Press and hold the Power Button for at least 10 seconds to force restart.
SCANNING AND IMAGING
To scan a bar code symbol:
- Point the scan window at the bar code.
- Press one of the scan triggers. A red spot illuminates the symbol, which is captured and decoded.
If the scan has been successful:
If enabled, the good read beep plays.
If enabled, the GreenSpot projects a green spot onto the bar code image.
If enabled, the good read indicator positioned at the top left side of the
display glows solid green.
The decode results are displayed on the screen.
Aiming Beam
The aiming beam is smaller when the device is closer to the barcode and larger
when it is farther from the barcode.
Scan symbols with smaller bars or elements (mil size) should be read closer to
the unit and those with larger bars or elements (mil size) should be read
farther from the unit.
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2020 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means, or for any purpose,
without the express written permission of Datalogic S.p.A. and/or its
affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser’s own
internal business purposes.
Purchaser shall not remove or alter any proprietary notices, including
copyright notices, contained in this documentation and shall ensure that all
notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic
website (www.datalogic.com).
If you visit our website and would like to make comments or suggestions about
this or other Datalogic publications, please let us know via the “Contact”
page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other
trademarks and brands are property of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
REFERENCE DOCUMENTATION
For further information regarding Memor K refer to the SDK Help online and to the Memor K User’s Manual, downloadable from our website www.datalogic.com.
SUPPORT THROUGH THE WEBSITE
Datalogic provides several services as well as technical support through its
website.
Log on to www.datalogic.com.
For quick access, from the home page click on the search icon, and type in the
name of the product you’re looking for. This allows you access to download
Data Sheets, Manuals, Software & Utilities, and Drawings.
Hover over the Support & Service menu for access to Services and Technical
Support.
©2020 Datalogic S.p.A. and/or its affiliates
All rights reserved
Without limiting the rights under copyright, no part of this documentation may
be reproduced, stored in or introduced into a retrieval system, or transmitted
in any form or by any means, or for any purpose, without the express written
permission of Datalogic S.p.A. and/or its affiliates
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.
in many countries, including the U.S. and the E.U.
See the Safety & Regulatory Addendum included with your product for
additional regulatory, safety, and legal information.
www.datalogic.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>