pdp 500-165 Little Wireless Controller User Guide

pdp 500-165 Little Wireless Controller User Guide

2-YEAR LIMITED MANUFACTURER’S WARRANTY

• Coverage and Terms • PDP warrants that this product will be free from manufacturing defects for two years from the original date of purchase. Manufacturing defects are those defects in materials and/or workmanship, subject to final determination by PDP’s customer service department. This warranty applies only to original purchasers with a valid proof of purchase from an authorized PDP retailer that clearly shows the date of purchase.
• Exclusive Remedy and Exclusions • The exclusive remedy for valid claims will be the repair, replacement, or refund of the product. This warranty does not cover defects caused by accidents, improper or abusive use of the product, unauthorized or improper modifications, repairs, or handling.
• How to Get Service • Purchasers with product issues should not return the product to the store, but instead contact PDP’s customer service department first. You can contact PDP customer service by phone at 1-800-331-3844 (US and Canada only), Monday to Friday from 8 AM to 6 PM PST. International customers can contact us by phone at +442036957905. You can always reach us, 24/7, by visiting support.pdp.com and clicking the “Submit a Request” button top right of the page to open a support ticket. Inquiries are typically answered within 24 business hours.
• Your Rights Under Applicable Law • This warranty does not affect the legal rights of customers under applicable state, provincial, or national laws governing the sale of consumer goods.
• Additional Information for Australian Consumers • PDP products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given to you under our express warranty are in addition to other rights and remedies you have under the Australian Consumer Law and other laws.

1 Initial Setup

First press A/B/X/Y or the D-pad to wake up the controller. In the home screen, select [Controllers] > [Change Grip/Order]. Once on the pairing screen, press and hold the sync button at
the top of the controller by the charging port. On the next screen, press and hold the sync button for at least 2 seconds and then follow the instructions. Once paired, the player indicator light will be illuminated. Tip: To unpair hold down the sync button for at least 1 second.

Charging the Controller

When the controller is low on battery, the indicator LED (located next to the USB C plug) will blink RED every 30 seconds. Connect the controller using the USB type C to the dock. The indicator LED will be on and RED while being charged. Once fully charged, the LED will turn off.

FCC AND IC STATEMENT FOR WIRELESS PRODUCTS

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The equipment complies with FCC RF exposure limites set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limi ts for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a cir cuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC Rules.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. this device may not cause harmful interfer ence, and
2. this device must accept any interference received, including interference that may cause undesired operation. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada,. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen tha t the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
   This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interfer ence, and (2) this device must accept any interfer ence, including interference that may cause undesired operation of the device.

Hereby, Performance Designed Products, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at

WARNING – BATTERY LEAKAGE

This product contains a rechargeable lithium ion battery pack. Leakage of ingredients contained within the battery pack, or the combustion products of the ingredients, can cause personal injury as well as damage to your product. If battery leakage occurs, avoid contact with skin. If contact occurs, immediately wash thoroughly with soap and water. If liquid leaking from a battery pack comes into contact with your eyes, immediately flush thoroughly with water and see a doctor.

TO AVOID BATTERY LEAKAGE

Do not dispose of battery pack in a fire.
Do not touch the terminals of the battery or cause a short between the terminals with a metal object. Do not peel or damage the battery label.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>