KOAMTAC KDC415iNT-OP-R2 1D Laser Barcode MSR Smartsled User Guide
- June 6, 2024
- KOAMTAC
Table of Contents
KOAMTAC KDC415iNT-OP-R2 1D Laser Barcode MSR Smartsled
What’s in the Box?
- KDC415/425
- Micro USB Cable
- Hand Strap
- Quick Manual
- KOAMTACON Guide
Basic Operation
-
Aim the KDC® directly at the barcode and press either of the SCAN buttons located on each side of the device ensuring the beam covers the barcode horizontally.
-
A successful scan will sound 1 beep and show a green LED. An unsuccessful scan will sound 2 beeps and show a red LED.
Powering On/Off
Power On
Slide the POWER switch up.
Power Off
Slide the POWER switch down.
Bluetooth Profiles Explained
HID NORMAL
Allows one-way Bluetooth communication with an Android, Mac, and Windows
host device. The KDC only transmits data to the host device.
SPP
Allows two-way Bluetooth communication. The KDC transmits data to host
device and the host can transmit data back to the KDC.
HID IOS
Allows one-way Bluetooth communication with an iOS host device. The KDC
only transmits data to the iOS host device.
MFI
Allows two-way Bluetooth communication with an iOS host device. The KDC
transmits data to an iOS host device and the iOS host can transmit data back
to the KDC.
HID inputs data directly into an application. Both SPP and MFi require KOAMTAC KTSync® app or integration of the KOAMTAC SDK to input data into an application.
Additional Accessories
- SmartSled Cases for Apple and Android
- Micro USB Cable
- 1,200mAh Battery
- KBD401K Bluetooth Classic Dongle
KDC400 Models
- KDC415iT-OP-R2 1D Laser Barcode MSR Smartsled
- KDC415iNT-OP-R2 1D Laser Barcode MSR Smartsled
- KDC425iT-SF-R2 2D Imager Barcode MSR Smartsled
- KDC425iNT-SF-R2 2D Imager Barcode MSR Smartsled
Pairing & Connecting
- Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.
- Ensure that Bluetooth is enabled on the host device and searching for devices.
- Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer to the previous panel.
- Check the list of available Bluetooth devices on your host device.
- From the list, select KDC400 listed by serial number in brackets that matches the serial number found on the back side of the KDC400.
- In HID mode, KDC400 is now ready to use.
- To complete connection in SPP/MFi mode, launch KTSync or your application and select KDC400.
* The KDC400 will beep when successfully connected.
Specs
Functionality
Memory Flash ROM: 256KB Program Memory RAM: 64KB
Can store more than 8,000 Barcodes (EAN-13)
Wedging & Synchronization
Store to a file or transfer to an application Keyboard wedge function
Add-on prefixes and suffixes
Barcode option selection
Scan Range (10mil Code39)
Laser: 1.97″ to 7.48″ (50 mm to 190 mm) Imager: 3.2″ to 9.2″ (81 mm to 234 mm)
Supporting OS
Android / iOS / Mac OS X / Windows
Interfaces
Bluetooth V2.1+EDR, Class 2, HID/SPP/MFi
USB to Serial (Ultra-mini USB port)
User Environment
Drop Spec: 5′ (1.5 m)
Operating: 32˚F to 113˚F (0˚C to 45˚C)
Storage: -4˚F to 113˚F (-20˚C to 45˚C)
Humidity: 5% to 85% (non-condensing)
Mag-Stripe Reader (MSR)
Complies with ISO 7810/7811/7812 (Triple track)
Life: Minimum 500,000 swipes
NFC Standards Supported
ISO/IEC 14443 A/B, ISO/IEC 15693, FeliCa, MIFARE (1K/4K
Ultralight/UltralightC/DESFire
KDC400 Series Diagram
Documents / Resources
|
KOAMTAC KDC415iNT-OP-R2 1D Laser Barcode MSR
Smartsled
[pdf] User Guide
KDC415iT-OP-R2, 1D Laser Barcode MSR Smartsled, KDC415iNT-OP-R2, 1D Laser
Barcode MSR Smartsled, KDC425iNT-SF-R2, 2D Imager Barcode MSR Smartsled,
KDC425iT-SF-R2, 2D Imager Barcode MSR Smartsled, KDC400 Series Mini
---|---