Minoston MB10TW Smart Wi-Fi LED Bulb User Manual
- June 6, 2024
- Minoston
Table of Contents
User Manual
Smart Wi-Fi LED Bulb
MB10TW
Warning
RISK OF ELECTRIC SHOCK OR BURNS.
- Make sure the power is OFF on the bulb you are replacing.
- Wait until the bulb cools down and then replace it.
- Do not install the bulb with wet hands or when standing on wet or damp surfaces.
- Suitable for use in the operating environment between -20°C and 40°C (- 4°F and 104°F).
- Not for emergency lighting.
Quick Installation Guide
1. Download the Smart-life app.
*On Google Play (for Android phone) or Apple Store (for iOS phone) to download.
https://e.tuya.com/smartlife
QR code
| 
Smart Life
---|---
Bluetooth Quick-Fit Mode
2. Install your Smart LED Bulb.
3. When the bulb is ON, the flip light switches OFF/ON x 4 times to set into configuration mode. (Operation speed shall NOT be too fast)
4. White light smoothly flashing 3 times: entering into configuration mode.
5: You’ll see “Devices to be added”– “Go to add”.
6: Click to “Add ”
7: Enter the Wi-Fi Password (Your phone should have connected to the same Wi-
Fi first).
8: Wait for its 100%.
9: Edit the name of your new smart plug!
Pairing Modes
EZ mode: The device’s light is rapidly blinking for an easy, quick pairing
setup. AP Mode: Access Point mode is a secondary setup process in which the
bulb is slowly blinking and requires multiple steps for pairing. Follow the
on-screen step-by-step instructions.
APP FUNCTIONS
| 
---|---
How to Use
Amazon Alexa Voice Control
- Add a smart device to the Smart-life app.
- Change device name in Smart-life app so that Alexa can easily recognize, such as Living Room Light, Bedroom Light, etc.
- Launch the Alexa app and sign in to your Alexa account and make sure you have at least one Alexa voice-controlled device installed like Echo, Echo dot, etc.
- Tap on”Skill & Games” in the Alexa app menu.
- Search for “Smart-life”.Tap”Enable”to enable the skill.
- select the country where your Smart-life app account is located, enter the Smart-life app account and password to link your Smart-life account. Now you can enjoy the
Alexa voice control now.
Common commands:
-“Alexa, turn on/off bedroom light?
-“Alexa, set bedroom light to 50 percent.”
-“Alex°, brighten/dim bedroom light.”
-“Alex°, set bedroom light to green.”
- Add a smart device in the Smart-life app.
- change device name in Smart-life app so that Alexa can easily recognize, such as Bedroom Light, Living Room Light, etc.
- Launch the Google Home app and sign in to your Google Home account and make sure Do you have a Google Home device setup finished.
- On the main page of the Google Home app, tap the sidebar menu in the top left corner and select “Home Control”.
- Tap the plus sign in the lower right corner and search for”Smart-life”.
- Select the country where your Smart-life app account is located, enter the Smart-life app account and password to link your Smart-life account. Now you can enjoy the
Google Assistant voice control now.
Common commands:
-“HeyGoogle, turn on/off bedroom light?
–Hey 600gle, set bedroom light to 50 percent?
–Hey Google, brighten/dim bedroom light?
-“Hey 600gle, set bedroom light to green:
FAQ
We strive to assure your satisfaction. We apologize for any inconvenience with
the installation or operation of the smart bulb and are happy to assist at
ask@minoston.com
1. How do l reset my smart bulb?
Turn the light switch controlling the bulb to ON first, the flip the light
switch OFF and ON 4 times(Operation speed shall NOT be too fast).
Note that factory resetting the smart bulb will erase all of your custom
settings, and you’ll have to set it up again.
2. Can l dim my smart bulb with a standard in-wall dimmer?
No. The smart bulb does not support a standard in-wall dimmer. You can dim it
via Smart-life
Warranty
Our Products warrants this product to be free from manufacturing defects for a
period of one year from the original date of consumer purchase. This warranty
is limited to the repair or replacement of this product only and does not
extend to consequential or incidental damage to other products that may be
used with this product. This warranty is in lieu of all other warranties,
expressed or implied. Some states do not allow limitations on how long an
implied warranty lasts or permit the exclusion or limitation of incidental or
consequential damage, so the above limitations may not apply to you. This
warranty gives you specific rights, and you may also have other rights which
vary from state to state. if any problems occur, please contact
ask@minoston.com for help.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
RISK OF ELECTRICAL SHOCK – USE IN DRY LOCATION ONLY DO NOT USE WITH DIMMERS
NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES
FCC warning:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. changes r modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the Rules. these limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator& your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>