FIBARO Home Center Lite Instruction Manual
- June 6, 2024
- FIBARO
Table of Contents
Thank You
for purchasing
Home Center Lite
Instruction Manualwww.manuals.fibaro.com
IMPORTANT!
Read the manual before attempting to use the device!
Support
For more information about FIBARO System, like video guides, technical
manuals, configuration parameters, and declarations, visit our website:
manuals.fibaro.com. If you still need some assistance, contact our Technical
Support or the closest certified FIBARO reseller which can be found at
www.fibaro.com.
Note:
Some of the FIBARO System components installations may involve mains voltage
connection.
It can be dangerous. If you are not sure how to install the devices, use a
certified installer’s services.
| Do not expose this product to moisture, water or other liquids.
---|---
| Do not attempt to examine or repair this product yourself.
| This product is designed for indoor use only. Do not use outside!
Contents
|
---|---
|
-
Connect antenna
Start by connecting the antenna, by turning the mounting screw clockwise.
-
Connect ethernet cable
Using the included ethernet cable, connect Home Center Lite’s LAN port to a router in order to connect the gateway to the internet.
-
Connect power adapter
Connect the included power adapter to Home Center Lite and plug it to the main socket.
-
Turn on Home Center Lite
Press the POWER button briefly.
Your Home Center Lite will be ready to work in few seconds.
Your Local Network
Connect your Home Center Lite with a router using the included LAN cable and start the gateway. From now on Home Center Lite will be visible to all devices within your local area network (LAN).
Remote Access
By default, the Home Center Lite is visible only within your local network. To
enable remote access from outside of your local network, configure a
home.fibaro.com account.
LED diodes
LEDs located on the front panel of the Home Center Lite enclosure have the following purpose:
| Power
Glows when the power supply is on.
---|---
| Lan Network
Glows when the HCL is connected to the local network.
| Internet
Glows when the HCL is connected to the internet.
| Z-Wave
Blinks when the HCL sends commands to the Z-Wave network devices.
| Update available
Blinks when a software update is available.
First launch on desktop
-
Go to www.fibaro.com/support and download FIBARO Finder.
-
Launch FIBARO Finder and click Refresh.
-
Select your Home Center Lite and click Connect.
-
Log in with the defaults: admin/admin
-
Select Configuration from the main menu.
-
Scroll down to the bottom and click Start upgrade (if not visible – wait a few minutes and refresh the page).
-
When new software is installed, log back in.
First launch on mobile devices
- Download the FIBARO mobile apps appropriate for your device.
- For iPhone: www.fibaro.com/ios-app
For Android: www.fibaro.com/android-app
|
---|---
www.fibaro.com/ios-app| www.fibaro.com /android-app - Launch downloaded the app.
- Select your Home Center Lite from the list.
- Log in with the defaults: admin/admin
- Follow the steps of the configuration wizard.
Create Rooms
When setting up your intelligent home start with creating rooms to reflect the
layout of your home.
Select Rooms from the main menu.
Sections
Section is a group of rooms in your home.
Section may be a whole floor or a few rooms.
Rooms
Name the room and choose the section to which you would like to add it.
Change an icon
Each room can be represented by a unique icon. You can change the icons in the
advanced room’s settings.
Add devices
After creating the rooms you can start adding the devices.
Select “Devices” from the main menu.
Select the “Add or remove device” option from the left side menu. Click “Add”
to start adding a new device (learning mode).
The timer will count down the time (30 sec by default) for you to add a new device to the Z-Wave network (inclusion).
Note that the device needs to be located within direct range of the Home Center Lite during the inclusion process.
Please refer to each device’s manual for further information on how to include
it in the Z-Wave network.
NOTE:
Danger of electrocution! If you are not sure how to connect a device to the
wires, please contact a qualified installer.
Conformity with EU directives:
RED 2014/53/EU
RoHS 2011/65/EU
RoHS 2015/863
Simplified EU declaration of conformity:
Hereby, Fibar Group S.A. declares that the device is in compliance with
Directives
2014/53/EU and 2011/65/EU, 2015/863. The full text of the EU declaration of
conformity
is available at the following internet address:
www.manuals.fibaro.com
ATTENTION!
This product is not a toy. Keep away from children and animals!
WEEE Directive Compliance:
Devices labeled with this symbol should not be disposed of with other
household wastes.
It shall be handed over to the applicable collection point for the recycling
of waste
electrical and electronic equipment.
Specifications:
| Power supply: | 9-12 VDC (included) |
|---|---|
| Network Interface: | 10/100 Base-T Ethernet (RJ-45) |
| Operating temperature: | 10-40°C |
| Radio protocol: | Z-Wave |
| Radio frequency: | 868.0 – 868.6 MHz (EU), 919.5 – 920.0 MHz (H1.9 915.0 – |
928.0 MHz (ANZ), 868.7 – 869.2 MHz (RU)
Dimensions (L x W x H):| 90x 90×33 mm
Maximum transmit power:| +1 dBm (EU)
Guarantee terms and conditions
-
FIBAR GROUP S.A. with its registered office in Wysogotowo, ul. Serena 3, 62-081 Wysogotowo, entered into the Register of Entrepreneurs of the National Court Register maintained by the District Court for Poznań-Nowe Miasto and Wilda in Poznań, VIII Commercial Division of the National Court Register (KRS) under number: 553265, NIP 7811858097, REGON: 301595664, share capital PLN 1,182,100 paid in full, other contact information is available at: www.fibaro.com (hereinafter „the Manufacturer”) guarantees that the device sold (hereinafter: „the Device” is free from material and manufacturing defects.
-
The Manufacturer shall be responsible for the malfunctioning of the Device resulting from physical defects inherent in the Device that cause its operation to be incompatible with the specifications within the period of:
• 24 months from the date of purchase by the consumer,
• 12 months from the date of purchase by a business customer (the consumer and business customer are further collectively referred to as „Customer”). -
The Manufacturer shall remove any defects revealed during the guarantee period, free of charge, by repairing or replacing (at the sole discretion of the Manufacturer) the defective components of the Device with new or regenerated components. The manufacturer reserves the right to replace the entire Device with a new or regenerated device. The Manufacturer shall not refund the money paid for the device.
-
Under special circumstances, the Manufacturer may replace the Device with a different device most similar in technical characteristics.
-
Only the holder of a valid guaranty document shall be entitled to make claims under guarantee.
-
Before making a complaint, the Manufacturer recommends using the telephone or online support available at https://www.fibaro.com/support/.
-
In order to make a complaint, the Customer should contact the Manufacturer via the email address given at https://www.fibaro.com/support/.
-
After the complaint has been properly filed, the Customer will receive contact details for the Authorized Guarantee Service („AGS”).
The customer should contact and deliver the Device to AGS.
Upon receipt of the Device, the manufacturer shall inform the Customer of the return merchandise authorization number (RMA). -
Defects shall be removed within 30 days from the date of delivering the Device to AGS. The guarantee period shall be extended by the time in which the Device was kept by AGS.
-
The faulty device shall be provided by the Customer with complete standard equipment and documents proving its purchase.
-
The cost of transporting the Device in the territory of the Republic of Poland shall be covered by the Manufacturer. The costs of the Device transport from other countries shall be covered by the Customer. For unjustified complaints, AGS may charge the Customer with costs related to the case.
-
AGS shall not accept a complaint claim when:
• the Device was misused or the manual was not observed,
• the Device was provided by the Customer incomplete, without accessories or nameplate,
• it was determined that the fault was caused by other reasons than a material or manufacturing defect of the Device
• the guarantee document is not valid or there is no proof of purchase, -
The guarantee shall not cover:
• mechanical damages (cracks, fractures, cuts, abrasions, physical deformations caused by impact, falling or dropping the device or other object, improper use or not observing the operating manual);
• damages resulting from external causes, e.g.: flood, storm, fire, lightning, natural disasters, earthquakes, war, civil disturbance, force majeure, unforeseen accidents, theft, water damage, liquid leakage, battery spill, weather conditions, sunlight, sand, moisture, high or low temperature, air pollution;
• damages caused by malfunctioning software, attack of a computer virus, or by failure to update the software as recommended by the Manufacturer;
• damages resulting from surges in the power and/or telecommunication network, improper connection to the grid in a manner inconsistent with the operating manual, or from connecting other devices not recommended by the Manufacturer.
• damages caused by operating or storing the device in extremely adverse conditions, i.e. high humidity, dust, too low (freezing), or too high ambient temperature. Detailed permissible conditions for operating the Device are defined in the operating manual;
• damages caused by using accessories not recommended by the Manufacturer
• damages caused by the faulty electrical installation of the Customer, including the use of incorrect fuses;
• damages caused by Customer’s failure to provide maintenance and servicing activities defined in the operating manual;
• damages resulting from the use of spurious spare parts or accessories improper for a given model, repairing and introducing alterations by unauthorized persons;
• defects caused by operating faulty Devices or accessories. -
The guarantee shall not cover the natural wear and tear of the Device and its components listed in the operating manual and in technical documentation as such elements have a defined operational life.
-
The Device Guarantee shall not exclude, limit or suspend the Customer’s warranty rights.
-
The Manufacturer shall not be liable for damages to property caused by the defective devices. The Guarantor shall not be liable for indirect, incidental, special, consequential or punitive damages, or for any damages, including, inter alia, loss of profits, savings, data, loss of benefits, claims by third parties, and any other damages arising from or related to the use of the Device.
Legal notices
All information, including, but not limited to, information regarding the features, functionality, and/or other product specification are subject to change without notice. FIBARO reserves all rights to revise or update its products, software, or documentation without any obligation to notify any individual or entity. Fibaro and Fibar Group logo are trademarks of Fibar Group S.A. All other brands and product names referred to herein are trademarks of their respective holders. The product is covered by one or more claims of patents found at http://sipcollc.com/patent-list/ and http://intusiq.com/patent-list/.
HOME
INTELLIGENCE
Documents / Resources
|
FIBARO Home Center
Lite
[pdf] Instruction Manual
Home Center Lite
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>