FIBARO FGBHT-001 Radiator Thermostat User Guide

: June 4, 2024
: FIBARO

Table of Contents

FIBARO The Heat Controller
Package contents (page 3):
Download FIBARO app from the App Store (page 4).
Specifications (thermostatic head):
Specifications (sensor – optional):
Warranty terms and conditions:
Legal information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FIBARO FGBHT-001 Radiator Thermostat User Guide

FIBARO The Heat Controller

FIBARO The Heat Controller is a HomeKit-enabled thermostatic head to control temperature in your room using Bluetooth® low energy wireless technology.
It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves.
You can create schedules via app to easily manage temperature throughout the week.

TIP: Check corresponding chapters of Quick Start Guide for pictures.

Package contents (page 3):

Thermostatic head,
2 adapters (for Danfoss RTD-N and RA-N valves),
Maintenance key,
Extra temperature sensor (optional),
Manuals and warranty terms.

Download FIBARO app from the App Store (page 4).

First launch (page 5):

Connect the charger to the micro-USB port to charge the device (Fig. 1).
Disconnect the charger when the LED ring pulses green (device fully charged) (Fig. 2).
Dismount your current thermostatic head (Fig. 3).
Depending on type of your valve proceed normally or use adapter (Fig. 4).
Mount the device on the valve and tighten it by turning the cap clockwise (Fig. 5).
Use the included key to click the button (Fig. 6).
Open the FIBARO app and tap icon (Fig. 7).
Application will guide you through the installation and pairing process.

Setup Code:

You will find the Setup Code on the device’s housing and on the back of the Quick Start Guide.

Reset (page 7):

Use the included key to press and hold the button. When the LED ring glows yellow, release the button (Fig. 8).
Click the button again immediately to confirm.
The device will be put in Standby Mode. Click the button to activate it again.

IMPORTANT: Read the full manual before attempting to use the device!

For more information about the device, like video guides, parameters, technical manuals, and declarations visit our website:
manuals.fibaro.com/en/hk-heat-controller

Specifications (thermostatic head):

Power supply: 3.7V Li-Poly battery pack (non-replaceable)
Supported charger: micro-USB 5V, min. 0.5A
Radio protocol: Bluetooth® low energy
Radio frequency band: 2.4 GHz
Max. transmit power: 6 dBm
Operating temperature: 0-40°C
Maximum water temperature: 90°C
Supported valves:
M30 x 1.5, Danfoss RTD-N, Danfoss RA-N
Dimensions (D x L):
56 x 74 mm
56 x 87 mm (with adapter)

Specifications (sensor – optional):

Power supply: 3.0V CR2032 battery (included)
Radio frequency band: 2.4 GHz
Max. transmit power: 1 dBm
Operating temperature: 0-40°C
Dimensions (D x H): 38 x 12 mm

Warnings:

Failure to observe recommendations included in the manual may cause risk to health or malfunction of the device. The manufacturer, Fibar Group S.A. will not be held responsible for any loss or damage resulting from not following instructions of the manuals.

CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

This product is not a toy. Keep away from children and animals! CR2032 coin cells are harmful if swallowed!

Warranty terms and conditions:

FIBAR GROUP S.A. with its registered office in Wysogotowo, ul. Serdeczna 3, 62-081 Wysogotowo, entered into the Register of Entrepreneurs of the National Court Register maintained by the District Court for Poznań-Nowe Miasto and Wilda in Poznań, VIII Commercial Division of the National Court Register (KRS) under number: 553265, NIP 7811858097, REGON: 301595664, share capital PLN 1,182,100 paid in full, other contact information is available at: www.fibaro.com (hereinafter “the Manufacturer”) guarantees that the device sold (hereinaftr: “the Device” is free from material and manufacturing defects.
The Manufacturer shall be responsible for malfunctioning of the
Device resulting from physical defects inherent in the Device that cause its operation to be incompatible with the specifications within the period of:
- 24 months from the date of purchase by the consumer,
- 12 months from the date of purchase by a business customer (the consumer and business customer are further collectively referred to as “Customer”).
The Manufacturer shall remove any defects revealed during the guarantee period, free of charge, by repairing or replacing (at the sole discretion of the Manufacturer) the defective components of the Device with new or regenerated components. The manufacturer reserves the right to replace the entire Device with a new or regenerated device. The Manufacturer shall not refund money paid for the device.
Under special circumstances, the Manufacturer may replace the Device with a different device most similar in technical characteristics.
Only the holder of a valid guaranty document shall be entitled to make claims under guarantee.
Before making a complaint, the Manufacturer recommends using the telephone or online support available at
https://www.fibaro.com/support/.
In order to make a complaint, the Customer should contact the Manufacturer via the email address given at https://www.fibaro.com/support/.
After the complaint has been properly filed, the Customer will receive contact details for the Authorized Guarantee Service (“AGS”).
The customer should contact and deliver the Device to AGS. Upon receipt of the Device, the manufacturer shall inform the Customer of the return merchandise authorization number (RMA).
Defects shall be removed within 30 days from the date of delivering the Device to AGS. The guarantee period shall be extended by the time in which the Device was kept by AGS.
The faulty device shall be provided by the Customer with complete standard equipment and documents proving its purchase.
The cost of transporting the Device in the territory of the Republic of Poland shall be covered by the Manufacturer. The costs of the Device transport from other countries shall be covered by the Customer.
For unjustified complaints, AGS may charge the Customer with costs related to the case.
AGS shall not accept a complaint claim when:
- the Device was misused or the manual was not observed,
- the Device was provided by the Customer incomplete, without accessories or nameplate,
- it was determined that the fault was caused by other reasons than a material or manufacturing defect of the Device
- the guarantee document is not valid or there is no proof of purchase, 13. The guarantee shall not cover:
- mechanical damages (cracks, fractures, cuts, abrasions, physical deformations caused by impact, falling or dropping the device or other object, improper use or not observing the operating manual);
- damages resulting from external causes, e.g.: flood, storm, fire, lightning, natural disasters, earthquakes, war, civil disturbance, force majeure, unforeseen accidents, theft, water damage, liquid leakage, battery spill, weather conditions, sunlight, sand, moisture, high or low temperature, air pollution;
- damages caused by malfunctioning software, attack of a computer virus, or by failure to update the software as recommended by the Manufacturer;
- damages resulting from: surges in the power and/or telecommunication network, improper connection to the grid in a manner inconsistent with the operating manual, or from connecting other devices not recommended by the Manufacturer.
- damages caused by operating or storing the device in extremely adverse conditions, i.e. high humidity, dust, too low (freezing) or too high ambient temperature. Detailed permissible conditions for operating the Device are defined in the operating manual;
- damages caused by using accessories not recommended by the Manufacturer
- damages caused by faulty electrical installation of the Customer, including the use of incorrect fuses;
- damages caused by Customer’s failure to provide maintenance and servicing activities defined in the operating manual;
- damages resulting from the use of spurious spare parts or accessories improper for given model, repairing and introducing alterations by unauthorized persons;
- defects caused by operating faulty Device or accessories.
The guarantee shall not cover natural wear and tear of the Device and its components listed in the operating manual and in technical documentation as such elements have a defined operational life.
The Device Guarantee shall not exclude, limit or suspend the Customer’s warranty rights.
The Manufacturer shall not be liable for damages to property caused by defective device. The Guarantor shall not be liable for indirect, incidental, special, consequential or punitive damages, or for any damages, including, inter alia, loss of profits, savings, data, loss of benefits, claims by third parties and any other damages arising from or related to the use of the Device.

Legal information

Fibaro and Fibar Group are registered trademarks of Fibar Group S.A. The Bluetooth word mark is registered trademark of Bluetooth SIG, Inc. Apple and HomeKit are registered trademarks of Apple Inc.

Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Hereby, Fibar Group S.A. declares that the device is in compliance with Directives: 2014/53/EU, 2011/65/EU, 2015/863. The full text of the EU declaration of conformity is available at the following internet address: www.manuals.fibaro.com

Device labelled with this symbol should not be disposed with other household wastes. It shall be handed over to the applicable collection point for the recycling of waste electrical and electronic equipment.

Logo