Lenco LS-300 Tunable Type Belt Drive User Manual

Model No: LS-300

User Manual – Turntable with Bluetooth and wooden speakers

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3.  Keep the device away from heat sources such as radiators, heaters, stoves, candles, and other heat-generating products or naked flame. The apparatus can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35° C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb the normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens, or near swimming pools.
8. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit could maybe not work properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
10.  Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
12. Keep away from rodents. Rodents enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with diluted detergent.
14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
15.  Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
16.  If the unit has USB playback function, the usb memory stick should be plugged into the unit directly. Don’t use a USB  extension cable because it can cause interference resulting in failure of data.
17.  The rating label has been marked on the bottom or back panel of the apparatus.
18. This device is not intended for use by people (including children) with physical, sensory, or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
19. This product is intended for nonprofessional use only and not for commercial or industrial use.
20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
21.  Never remove the casing of this apparatus.
22.  Never place this apparatus on other electrical equipment.
23.  Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or the plug, when the liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
26.  Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
27. If the product is delivered with a power cable or AC power adaptor

•  If any trouble occurs, disconnect the AC power card and refer servicing to qualified personnel.

• To completely disconnect the power input, the main plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.

• Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.

• Unplug this device during lightning storms or when unused for a long period.

• The socket-outlet must be installed near the equipment and must be easily accessible.

• Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.

• Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.

• Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.

• Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
  28. If the product contains or is delivered with a remote control containing coin/cell batteries:

• Warning: Do not ingest battery, Chemical Burn Hazard” or equivalent working.

• [The remote control supplied with] This product contains a coin / button cell battery is swallowed, it can cause
  severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children.

• If the battery compartment does not close securely, stop using the product and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  29. Caution about the use of Batteries:

•  The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

• The battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitudes during use, storage, or transportation.

• Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.

•  Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

•  Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or that leakage of flammable liquid or gas.

• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

•  Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Those instructions are related only to products using power cable or AC power adaptor

TURNTABLE PARTS:

1. Lift Lever
2. Auto Stop Control Switch
3.  Speed Selection Switch
4. Tone Arm Lock
5. Tone Arm
6.  Power Led Light Indicator
7.  Volume Control Switch
8. Phono Stylus Cartridge
9. Turntable Shaft
10.  Turntable Platter
11.  Removable Dust Cover
12.  Hinge
13.  External Speaker Jacks
14. Function Selection Switch
15.  RCA Output Jack
16.  Power Adaptor Jack
17. Power On/Off Switch
18. External Speakers
19.  Speaker Jacks at External Speaker

An AC/DC adaptor with an output of 12V DC 2.0A is included with this Turntable with Bluetooth and Wooden Speakers. The adaptor is required for operating the unit.
Connect the external speaker cables from the External Speaker Jack on the back of the unit to each speaker.
Note: The external speaker cables are color-coded, the red cable is plugged into a red jack on both the unit and speakers (black cable into the blackjacks).
Firmly and securely insert the DC plug of the adaptor to the DC IN jack on the back of the unit.
Plug the adaptor’s AC plugs into a power outlet rated at 220-240V AV ~ 50 Hz.
Turn on the unit by switching the Power On/Off Switch to the On position. The Power Led Light Indicator will turn on.
Remark: To avoid the Larsen effect or Feedback noise, you can do the following:
1. Put your speakers at a minimum distance of 60 cm or more from your turntable
2. Let the dustcover open when you play a record at the higher sound volume
2. Listen to a Record
1. Raise the dust cover
2. Slide the Function Selection Switch to the Phono position.
3. Turn on the unit by switching the power On/Off switch to On position. The Power Led Light Indicator will light in RED.
4. Place a record on the turntable platter and set the player speed to match the record speed.
Note: When playing a single (a 45 rpm record) and/or records with large center holes, use the 45 rpm adaptor.
Remove the needle cartridge protective cover and unlock the tone armlock from the tone armrest. Push the lift lever backward, the tonearm will gently rise up. Gently move the tonearm to the desired position over the record and the turntable platter will begin to rotate when the arm is moved towards it If Auto Stop Control Switch in ON. Release the tonearm onto the turntable by pushing the lift lever forward and the vinyl record will begin to play.
If the Auto Control Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control Switch is turned OFF, the record will NOT stop automatically when finished; you must push the lift lever backward to raise the tonearm and place it back in the rest and then turn off the power to stop the turntable from spinning.
Remark: AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it does not come to the end, or it will not stop when it comes to the end when AUTO STOP is ON.
3. Listen to Bluetooth
An external device with Bluetooth Connectivity can be wirelessly connected to this Turntable using the Bluetooth function.

1. Turn on the unit by switching the Power On/Off Switch to the On position.
2. Turn the Function Selection Switch to the BT(Bluetooth) position, the Power Led Light Indicator will begin to flash BLUE.
3.  Turn your external device’s Bluetooth Setting ON. Wait a moment, then look for the Bluetooth pairing name “Lenco LS- 300”
4.  Select the Bluetooth pairing name, to connect the unit. Once connected, the BLUE Led light will stop flashing.
5. You are now connected to your external device via Bluetooth
6.  Rotate the Volume Control Knob to adjust the sound level or adjust the volume control at your external audio device.
7. Connect the RCA Output Jack to the external speaker system with the RCA cable (not provided) to enjoy vinyl records music on your speaker system.
   Remark: The LS-300 will go automatically in standby position if there is no audio signal (record or Bluetooth) during 20 minutes (-4/+5 minutes) and that end-user should power OFF and ON again on the backside to wake up from the Standby position.
   “This product has a Bluetooth transmission function, you can not receive any Bluetooth sound on it: this means that you can transmit wirelessly a Bluetooth sound signal to an external device like a Bluetooth speaker, Bluetooth headphone, audio system with Bluetooth reception,…”

Lenco|
---|---
Turntable| LS-300
Type| Belt drive full manual
Drive Motor| DC motor
Speed| 33 1/3 rpm, 45 rpm
Wow and flutter| 0.35%
Turntable platter| 300mm
Cartridge|
Type| N-40/Audio Technica AT3600
Stylus| 0.6 mil
Optimum Tracking force| 3.5 grams
Output| 2.5mV±3dB 1KHz
Frequency response| OdB±3dB 10KHz
Crosstalk| 18dB or more 1KHz
Signal-to-noise ratio(S/N)| 40dB
General|
ADAPTOR| input AC100-240V–50/60Hz 1.2A
output DC12V-2A
PRODUCT| DC12V-2A
Audio Output (Line Out)| 400-600mv
Power Consumption| 24W
Dimension| 424x331x160mm for main unit; 140x177x230mm for speaker
Weight| approx.6.9KGS LS-300WD
Weight| approx.6.9KGS LS-300BK

Power supply adaptor
Manufacturer: Blue Iron Enterprise Co., Ltd.
Model number: BI30-120200-I
Manufacturer: Dongguan Liyang Electrical Technology Co., Ltd
Model number: LY024SPS-120200Z
Use only the power supply listed in the user instructions

Guarantee
Lenco offers service and warranty in accordance with European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to a particular situation. No legal rights or entitlements may be obtained from the description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance with any applicable local laws of a requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
CE Marking
Products with the CE marking comply with the EMC Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) issued by the Commission of the European Community. Hereby, Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential requirements. The declaration of conformity may be consulted at techdoc@lenco.com
Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>