Lenco MC-020 Micro System User Manual

Model: MC-020

User manual
Microsystem with Bluetooth,
FM radio and USB

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.

PRECAUTIONS BEFORE USE KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles, and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb the normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids.
    To remove severe stains, you may use a damp cloth with diluted detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device, or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has a USB playback function, the USB memory stick should be plugged into the unit directly.
    Don’t use a USB extension cable because it can cause interference resulting in failure of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory, or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for nonprofessional use only and not for commercial or industrial use.

20.  Make sure the unit is adjusted to a stable position. Damage caused by using this product in unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when the liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with a power cable or AC power adaptor:
    • If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket-outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require an earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.
    This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just
    2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:
    • Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Description

1. LCD screen
2. Standby/Function button
3. Play/Pause/Stop button
4. Bluetooth mode
5. Volume-/Snooze button
6. Volume+/Alarm set button
7. Backward button
8. Forward button
9. Sleep/Time set button
10. Earphone jack
11. USB port
12. Speaker jack right side
13. Speaker jack left side
14. AC/DC adaptor jack
15. AUX IN jack
16. FM ANT Radio antenna
17. Batteries compartment
18. Stand auxiliary peripheral

Installing batteries

(Backup for the clock in case of a power outage)
– Open the battery compartment on the back of the appliance (17).
– Insert 2 LR3 1.5V batteries, respecting the indicated polarity.
– Close the battery compartment.

Installing the product
– Install the stand on the top of the sound station
– Connect the speakers to the sound station by plugging the sockets inside jacks (12) and (13)
– Connect the plug of the mains voltage adaptor into the socket (14). Plug the other end of the mains adaptor into a mains socket.
– Only use the adaptor supplied. If another adaptor is used, first make sure that it has identical specifications.

Standby/Function button
– Press and hold the button (2) to start up the device and select a model.
– To stop the device, press and hold the button (2).

Note: The last active mode before the stop of the device is selected by default in starting up.

To set Volume
Press the buttons (5) and (6) to adjust the sound volume from 0 to 16.

TO SET THE CLOCK TIME

In STANDBY OFF mode, Press and hold the button (9), the digital will blink on the display, then

– Press the (7) button to set the DESIRED HOUR,
– Press the (8) button to set the DESIRED MINUTE. Then press the TIME SET button to confirm.

TO SET ALARM FUNCTION
In Standby off mode
– Press and hold the button (6), the icon “AL 1” and the TIME display will blink.
– Press the (7) button to set the DESIRED HOUR,
– Press the (8) button to set the DESIRED MINUTE.
– After setting the alarm time as you desired, press the ALARM SET button again. You can now select whether the alarm should go on to Buzzer, Radio, or USB

Wake with buzzer

Press the button until “bb” icon is shown in the display, the buzzer sound will start at the set alarm time.

Wake with Radio
Press the button until the frequency is shown in the display. At the set time the alarm will go on at the radio station you last listened to.

Wake with USB
Press the button until the “USB” icon is shown in the display. This feature only works when you have a USB disk inserted in the USB port (11). This USB will be played at the set alarm time

– Press the ALARM SET button again to confirm your settings for Alarm 1.
– The alarm icon (Alarm 2) appears and the TIME display is blinking.
– Repeat the same step as alarm 1 in order to set Alarm 2.

To select which of the 2 alarms should be active, press the ALARM SET button repeatedly while the unit is in standby mode (clock display). The display will show consecutively the Alarm 1 icon, the Alarm 2 icon, the both Alarm icons. Press the ALARM SET button once again to deactivate the alarms (no alarm icon will be displayed).

SNOOZE FUNCTION

If you want to snooze a few more minutes press the SNOOZE BUTTON will deactivate the sound for approximately 9 minutes.

SHUT OFF ALARM:
When the alarm goes off, press the STANDBY BUTTON to turn off the alarm, the alarm will reset until the next day

SLEEP FUNCTION

– In standby on mode
– Press the button (2) to the desired source.
– Press and hold the SLEEP button (9). The “90” will appear on the display.
– Repeatedly press the SLEEP button (9) for desired sleep time between 90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes.
– The unit will automatically switch off when the SLEEP time expires.
– To turn sleep mode off, press the SLEEP button (9) until “OFF” is displayed.

RADIO OPERATION
– Press the STANDBY button (2) until the frequency shown on the display

How to use the buttons for radio
– Press the backward (7) or forward (8) button to search for the desired frequency.

Automatic Tuning
– Press & hold the backward (7) or forward (8) button until the display frequency starts to run
– When a station of sufficient strength has been found Tuning will stop or you can stop the automatic tuning by pressing the backward (7) or forward (8) button.
– To turn off the radio, press and hold the STANDBY (2) button.

UNIVERSAL SERIAL BUS PORT FUNCTION (USB) to listen
– Press the STANDBY (2) button until the USB icon shown on the display
– Connect the USB disk into the USB (11) port of the system.
– The USB disk will play automatically
– Press the PLAY/PAUSE again to stop playing temporarily Resume normal play by pressing the PLAY/PAUSE button again.
– To stop playback, press and hold the STOP (3) button. The total number of tracks will be shown on the display.
– To turn off the unit, press and hold the STANDBY (2) button.

AUX INPUT JACK
– Press the STANDBY (2) button until the AUX icon shown on the display
– Connect the AUX connect the wire from the out jack of your Personal Player such as a portable MP3 player to the AUX input jack.
– Play Start from your Personal Player and adjust the volume

CONNECT THE BLUETOOTH
Make sure that your peripheral has an A2DP profile for perfect compatibility. To prevent interference, we strongly recommend that you switch off WiFi on your peripheral during Bluetooth audio playback.

– Press the STANDBY (2) button until the bL icon shown on the display
– Turn on the Bluetooth feature on your mobile compatible device. Search for Lenco MC-020. Pair and connect to Lenco MC-020.
– You can now start playing your music
– Press the (7) or (8) button to choose the previous or next song
– When finished listening, press & hold the STANDBY (2) button to turn off the unit.

“This product has a Bluetooth reception function, you can not transmit any Bluetooth sound with it: this means that you can receive wirelessly a Bluetooth sound signal from an external source like a smartphone.”

CLOCK TIME CHECK FUNCTION

If you want to check the clock time during the PLAY mode, press the TIME SET (9) button once.

MAINTENANCE AND CLEANING

– If unused for a long time: disconnect the appliance and remove the clock batteries.
– Wipe finger marks and dust with a soft clean and damp cloth. Do not use aggressive products or solvents that may damage the appliance surface.
Caution: Never immerse the appliance in water or in any type of liquid.

Specifications

111 X 112 X 210mm (speaker)

USB:| USB2.0

This product operates at 2400 – 2483.5 MHz and is designated only to be used inside a normal household environment. This product is suited for this purpose within all EU counties.

Dongguan Obelieve Electronic Co., Ltd

91441900050747698U

Huazhaoxin Industrial Park B-4/F, Golden Phoenix Industrial Zone, FengGan Town, DongGuan, GuangDong Province,P.R.0

Model Identifier| OBL-0501500E, OBL-0501500B, OBL-0501500R
Input voltage| 100-240VAC
Input AC frequency| 50/60Hz
Output voltage| 5.0Vdc
Output current| 1.5A
Output Power| 7.5W
Average active efficiency| 77.67
Efficiency at low load (10%)| N/A
No-load power consumption| 0.071

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to a particular situation. No legal rights or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws of the requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that
this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service

For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>