XPOWER XP-WDL3-WH 10W Wireless Fast Charger LED Desk Lamp User Manual
- June 6, 2024
- XPOWER
Table of Contents
XPower International Trading Ltd.
More details: www.xpower.com.hk
XPower Hong Kong
XPowerHK
Repair:(852) 2708 8346, 5407 5467
Enquiry:(852) 2708 8198
Fax:(852) 2708 8196
Packing Content & Specifications:
- Input: 5V/2A, 9V/1.67A(max)
- Output: 10W(max) (Backward compatible 7.5W and 5W)/ 5W(Depends on mobile model & 10W or above quick charger is required(sold separately))
- Luminous flux: 120LM
- Color temperature: Cold light(5500-6000K)/ Warm light(2800-3300K)/ Nature light(40005000K)
- Product size: H385 x W90 x D165(mm)
- WDL3 Weight: 235g
How To Use:
Table lamp function:
- Connect WDL3 to a power supply(Depending on mobile model & 10W or above quick charger is required(sold separately)) and plug the charging cable into the Type-C port, the table lamp function is readied when the green indicator light is on.
- Touch the touch switch to turn on the cold light, and switch to warm light and natural light orderly by touching the touch switch. Touch the touch switch again to turn off the light mode cycle.
- WDL3 light pole’s angle and height can be adjusted freely.
Wireless charging function:
- Connect WDL3 to a power supply, the wireless charging function is readied when the green indicator light is on.
- Place your device on the wireless charging area correctly, the indicator light will be changed from green to slow breathing blue light.
- When the device is fully charged, the indicator light will be changed to green.
- FOD will be enabled when the blue light flashes. Please check whether the metal foreign body is misplaced in the charging area.
Attention :
- Please do not vigorously extrude or collide.
- Please do not dismantle or put it into fire or water when the product is powered on to avoid short circuit or leakage or corrosive environment, to avoid damage to the circuit leakage. card, bankcard, etc,) on the charging pad to avoid to cause
- Please do not use it in severely high temperatures, high humidity. Please do not put the magnetic strip or chip card on the charging pad, otherwise, ID magnetic card will lose efficacy.
- Please do not put the metal (Such as coin etc.) on the charging pad when charging, to avoid damage from heating.
- Avoid crash, hit, scrap, throw and prevent any damage to the charger.
- You may use a dry cloth to clean the product but avoid using any chemical cleaning product. O With Smart IC intelligent chip, XPower charger can auto-detects and maximize compatibility when charging. Besides, the XPower charger is using a built-in intelligence chip to avoid short circuits, overcharge, overheating, over-current, etc. XPower purchases USD200 million 3rd party product liability insurance. Public and Products Liability Insurance provides you with funds to pay compensation to a third party arising from injury or damage if proved product damage from XPower product.
- If the weather or temperature is hot, the temperature of the XPower charger and the charging device may be higher than normal during charging. The temperature will be higher when to put both devices are together. Thus, it is better if put the XPower power bank in the air circulation environment and should be avoided storing in the handbag, on or under the bed, etc.
- If you have any technical problem with our product, please feel free to contact our customer service department.
FCC and CE Radiation Norm
This equipment has been tested and found to comply with the limits for Class
Et digital devices pursuant to Part 15 of Federal Communications Commission
(FCC) rules.
This equipment has been tested and found to comply with the limits of the
European Council Directive on the approximation of law of the member states
relating to electromagnetic compatibility(89/338/EEC) according to EN 55022
Class B. FCC and CE Compliance Statement These limits are designed to
reasonable protection against frequency interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and If not Installed or used In accordance with the instructions may
cause harmful interference to radio communication, However, there is no
guarantee that interference will not occur in television reception. which can
be determined by turning the equipment off and on. The user is encouraged to
try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna increase the separation between the
equipment and the receiver Connect the receiver is connected to.
RoHS
Rol* stands for Restriction of Hazardous Substances, and impacts the entire
electronics industry and many electrical products as well. The original Rolls,
also known as Directive 2002/95/EC. originated In the European Union In 2002
and restricts the use of six hazardous materials found in electrical and
electronic products. Al applicable products in the EU market since July 1,
2008 must pass RoHS compliance.
Directive 2011/651EU was published in 2011 by the EU, which is known as RoHS-
Recast or RoHS 2. RoHS 2 includes a CE-marking directive. with RoHS compliance
now being required for CE marking of products. RoHS 2 also added Categories 8
and 9, and has additional compliance recordkeeping requirements.
CAUTION!
The Federal Communication Commission warns the user that changes or
modifications to the unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Disclaimer Statement
Thank you for your choice to purchase and use XPower products! Please read
this user manual carefully before using the product, to ensure the correct
operation method. We strongly recommend you make data backup before using this
product so as to make sure your data are completely safe. As the equipment
manufacturer, XPower does not afford any direct or indirect responsibility for
documents and data loss caused by any factor. Manufacturers do not have the
obligation to afford any compensation and data recovery. XPower does not make
a special promise to users and distributors. XPower does not afford any
unexpected data lose. direct or indirect loss. If you start to use this
product, that means you understand and accept this disclaimer!
Copyright Description
All XPower products and relative data belong to XPower International
Trading Ltd.. XPower International Trading Ltd. has the right of produce and
Copyright, reprodudIfin is prohibited.
This user manual includes but is not limited to all information with copyright
protection, without permission from XPower International Trading Ltd., no one
is allowed to clone, copy, excerpt. translation or use for other things. TMS
user manual does not have any form of warranty, position statement or another
hint. If there is any direct Or indirect data loss. economic loss or
enterprise bankruptcy caused by this user manual or its product information
mentioned, XPower International Trading Ltd. and its staff will not afford any
responsibility for that. Besides, the product specification and Information
mentioned in this user manual are just for your reference, and contents will
update at any time without further notice. XPower International Trading Ltd.
will not take responsibility for any error or negligence In this user manual.
The product name mentioned in this user manual can be only used for
Identification, and this name may be a pad of the other company’s registered
trademark or production rights. When the below two situations happened, this
product will not have %Power’s warranty and service. (1) The product does not
belong to XPower’s authorization of warranty, specification alteration, and
parts replacement. (2) Product bar code is vague or lost. The user manual will
update as the product specification or driver’s change. Please visit the
XPower International Trading Ltd. official website to get the details:
www.xpower.com.hk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>