XPOWER XP C7X Bluetooth Handfree Speaker User Manual

USER MANUAL
Model.XP-c7x

Appearance introduction.

1. Time display
2. Power button
3. TF/Micro SD card slot
4. USB port
5. Micro USB charging port
6. Aux-in port
7. Microphone
8. LED indicator

| 9 Play/pause
10)Mode
11) Previous song
12) Next song
13) Volume up
14) Volume down
15) Soft-touch button
---|---

Operation:

Charging:
The Micro USB interface is externally connected to a 5V/ 1000MA-2100mA charger. The red indicator light is on and flashing when charging through the small hole of the charging port, and the red light will be on for a long time after charging.

Bluetooth mode:

1. Push the POWER button to start up. The default Bluetooth mode is no TF card /USB drive, and the Bluetooth indicator flashes, waiting for a connection. (Or press the MODE button to select Bluetooth MODE), then open the Bluetooth device to search C7X for connection (no password pairing is required for the local connection), a prompt will be issued when the connection is successful, and the Bluetooth indicator will always be on.
   

2. Support Bluetooth speakerphone function. You can pick up the phone while listening to music via Bluetooth, and continue to play music after hanging up the phone. When calling, short press the PLAY/PAUSE button to answer the call. Long press the PLAY/PAUSE button to refuse to answer the call. To hang up, simply press the PLAY/PAUSE button. Double click the PLAY/PAUSE button to redial the last call.

3. C7X can automatically connect to the last connected Bluetooth device.

Music Mode:
When a TF card/USB drive is installed, it will enter the MUSIC MODE by default. In other modes, press the MODE button to switch to the MUSIC MODE, and the songs stored in TF card/ USB drive will be played. When playing music, you can pause or continue to play music by pressing the

PLAY/PAUSE button. Short press the PREVIOUS or NEXT button to select the previous or the next song.

Clock/Alarm mode:

1. Clock setting
   When C7X is on, press the MODE button to switch to CLOCK MODE to display the current time. Long press the PLAY/PAUSE button to enter the clock setting. The time display will flash. Press the PREVIOUS and NEXT buttons to adjust the hour. Long press the PLAY/PAUSE button again to adjust the minute. The minute will flash and press the PREVIOUS and NEXT buttons to adjust the minutes. It will be saved automatically a few seconds after the setting is completed. No need to press any button to confirm.

2. Alarm setting:
   2.1: In the power-on state, press the MODE button to switch to the CLOCK MODE, then press the PLAY/PAUSE button to turn the alarm ON and “ON” will be displayed. Then press the PLAY/PAUSE button again to turn the alarm OFF and “OFF” will be displayed.
   2.2: After the alarm is turned on, long-press the MODE button to enter the alarm setting, the alarm time will flash. Press the PREVIOUS and NEXT buttons to adjust the hour. Long press the MODE button again to adjust the minute. The minute will flash and press the PREVIOUS and NEXT buttons to adjust the minutes. It will be saved automatically a few seconds after the setting is completed. No need to press any button to confirm.

3. Stop alarm
   When the alarm rings, press the PLAY/PAUSE button to stop the alarm.

AUX signal input mode:
Connect C7X to your device by the 3.5mm cable provided. C7X will switch to AUX MODE automatically or press the MODE button to switch to the AUX MODE. Then play the music on your device.

Lighting mode:
Power-on light default WHITE LIGHT MODE, short touch the SOFT TOUCH button, to adjust the white light brightness. Long press the SOFT TOUCH button to switch to the COLOR LIGHT MODE, touch the SOFT TOUCH button to switch the light color.

Attentions

1. Please read the user manual carefully and keep it properly before you use the product.
   

2. For initial use, make sure the speaker is fully charged.

3. Please charge the speaker if the product hasn’t been used for over one month.

4. Be sure to use the CCC-certified charger made by a qualified manufacturer.

Warning

• Please don’t disassemble or modify your speaker for any reason to avoid the outbreak of a fire, electronic breakdown, even destroy the product thoroughly.

• Please don’t expose the speaker to extreme temperatures (below 0°C or above 45°C).

• Do not wet the speaker by contacting the liquid.

• Avoid crash, hit, scrap, throw and prevent any damage to the speaker.

• You may use a dry cloth to clean the product but avoid using any chemical cleaning product.

• If the weather or temperature is hot, the temperature of the speaker and the charging device may be higher than normal during charging. The temperature will be higher
  when to put both devices are together. Thus, it is better if put the speaker in the air circulation environment and should be avoided storing in the handbag, on or under the bed, etc.

•  If you have any technical problem with our product, please feel free to contact our customer service department.

XPower International Trading Ltd.
Repair:(852) 2708 8346, 5407 5467
Enquiry:(852) 2708 8198
Fax:(852) 2708 8196
More details.WWW.XPOWER.COM.hk
XPower Hong Kong
XPowerHK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>