WOZART LED Orchestrator Installation Guide
- October 27, 2023
- WOZART
Table of Contents
Installation guide
Wozart LED Orchestrator
Installation Guide Version 1.0
Updated on 19/04/2021
Welcome
This Guide will walk you through the installation of Wozart LED Orchestrator.
We hope you enjoy your purchase. We at Wozart have carefully crafted a
reliable, durable and secure Smart Home product. We promise to toil harder to
build awesome devices that make life simpler and planet more livable. We hope
our association continues and grows stronger with each passing day. You are
awesome for supporting the change we wish to bring in the way people live For
configuration video, scan the QR code below
https://www.youtube.com/watchv=Apmm6I0uc2I| https://www.youtube.com/watchv=4FzByU5cs8I
As Wozart app is frequently updated, there may be changes to this manual.
Please refer to www.wozart.com/support for the
latest version of the manual.
Download Wozart app from Google play store or App store.
What’s in the box
| Wozart LED Orchestrator
---|---
| Setup Code Sticker
| Warranty Card
Description
Wozart LED Orchestrator is a smart device that is designed to control LED,
RGB, RGBW strips. The device uses PWM output signal and controlled devices may
be powered by 12 -36V DC. RGB, RGBW Led Strip, One –Color LED strip, halogen
lights and other compliant resistive loads.
Technical Specifications
| Power Supply | 12 – 36 V DC |
|---|---|
| Rated load current | 1.5 Afor motors with compensated power factor |
| Compatible load types | Lights, PWM |
| Operating Temperature | 0-40°C |
| Ambient Humidity | 0-95 % RH without condensation |
| Communication Protocol | Wi-Fi 2.4 GHz 802.11 |
Dimensions
(HeightWidth•Depth)| 47 mm 47 mm * 21 mm
Weight| 60 Gms
Model| WLE01
Precautions
- The device is designed for lighting control of LED, RGB, RGBW strips, faulty connection or use may result in fire or electric shock.
- Do not power the device before full installation and assembling it.
- Do not handle the device with wet or moist hands.
- Do not modify or alter the device in any way not included in this manual
- Do not use in damp or wet locations, near shower, swimming pool, sink, or anywhere else where water or moisture are present.
- Do not connect device to loads exceeding recommended values.
- The load connected to its output must be powered by 12 – 36 V DC stabilized power supply with short circuit protection.
- If you do not have basic electrical wiring knowledge, please get help of an electrician or contact us.
Setup Guide
| GND | Ground Connector |
|---|---|
| P | 12-30V DC power supply |
| SW | Switch Connector slot |
Load connections
Switch off the main power supply
-
Connect GND Voltage power output from adaptor to terminal GND.
-
Connect 12-36 V DC from adaptor to terminal P.
-
Connect LED strip channels in the same order as on the diagram. If you want to connect RGB strip, do not connect OUT4.
-
Verify the connections.
-
Turn on the main power supply to the device and proceed with configuration on the Wozart app.
Troubleshooting
The device isn’t responding
a) Check if the Wi-Fi router is functioning properly.
b) Reconnect your smart controller device eg: Phone to Wi-Fi network to which
Wozart device is connected.
c) Switch off the main power supply of the room that has the device for 5
seconds and then switch it back ON.
d) Do factory reset as explained below and reconnect the device.
Factory Reset
Using a pin, press and hold the reset switch in slot R for 30 seconds until
you hear the
buzzer sound.
Note: If factory reset is done all your customization is lost. Do it only
if required.
Not able to scan the QR sticker as it is damaged.
Use the Spare QR Sticker provided in the Wozart LED Orchestrator box or enter
the code manually.
Warranty and Service
This Wozart device can be replaced in full for one year from date of purchase
in case of damage or malfunction due to manufacturing defects. This Warranty
does not cover cosmetic damage or damage from accident, neglect, misuse,
alteration or abnormal conditions of operation or handling. Wozart
Technologies or any of it licensors are not liable for any special,
incidental, consequential or indirect damages or losses arising from any
cause.
Resellers are not authorized to extend any other warranty on Wozart’s behalf.
Service for all Wozart products will be provided for device life time. To
obtain service, contact nearest authorized reseller or Wozart Technologies
Private Limited.
Thank You
Wozart Technologies Private Limited
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>