WOZART WSP0115 2500W Smart Plug Installation Guide
- June 4, 2024
- WOZART
Table of Contents
Installation guide
Mozart Smart Plug
Installation Guide Version 1.0
Updated on 07/09/2021
WSP0115 2500W Smart Plug
Welcome
This Guide will walk you through the installation of the Wozart Smart Plug
We hope you enjoy your purchase. We at Wozart have carefully crafted a
reliable, durable, and secure Smart Home product. We promise to toil harder to
build awesome devices that make life simpler and the planet more livable.
We hope our association continues and grows stronger with each passing day.
You are awesome for supporting the change we wish to bring in the way people
live
For the configuration video, scan the QR code below
https://www.youtube.com/watch?v=Apmm6I0uc2I
https://www.youtube.com/watch?v=4FzByU5cs8I
As the Mozart app is frequently updated, there may be changes to this manual.
Please refer to www.wozart.com/support for
the latest version of the manual.
Download the Mozart app from the Google play store or App store.
What’s in the box
| |
---|---|---
Wozart Smart Plug| Setup Code Sticker| Warranty Card
Description
Wozart Smart Plug is a smart device that turns electrical appliances or circuits on and off. The device fits into your existing wall socket and can be controlled either using voice commands or app interfaces on smart controller devices.
Technical Specifications
| Power Supply | 110 – 230 V AC |
|---|---|
| Rated load current | 1 * 20 A |
| Operating Temperature | 0-40°C |
| Ambient Humidity | 0-95 % RH without condensation |
| Communication Protocol | Wi-Fi 2.4 GHz 802.11 |
| Dimensions (HeightWidthDepth) | 76.5 mm 50 mm 69 mm |
| Weight | 128 Gms |
| Model | WSP01 |
Precautions
- The device is designed for the control of heavy power appliances.
- Do not handle the device with wet or moist hands.
- Do not modify or alter the device in any way not included in this manual.
- Do not use in damp or wet locations, near the shower, swimming pool, sink, or anywhere else where water or moisture is present.
- Do not connect the device to loads exceeding recommended values.
- Load plugged into the device must be powered by 110-230 V AC power
- If you do not have basic electrical wiring knowledge, please get the help of an electrician or contact us.
Setup Guide
Switch off the main power supply
- Insert Smart Plug into the 16A power socket.
- Plug the appliance into the Wozart Smart Plug.
- Turn on the main power supply to the device and proceed with configuration on the Mozart app.
Troubleshooting
The device isn’t responding
a) Check if the Wi-Fi router is functioning properly.
b) Reconnect your smart controller device eg: Phone to the Wi-Fi network to
which Mozart device is connected.
c) Switch off the power supply to the device for 5 seconds and then switch it
back ON.
d) Do factory reset as explained below and reconnect the device.
Factory Reset
Press and hold the reset switch on the top of the device for 10 seconds until
you hear the buzzer sound.
Note: If a factory reset is done all your customization is lost. Do it
only if required.
Not able to scan the QR sticker as it is damaged.
Use the Spare QR Sticker provided in the Wozart Smart Plug box or enter the
code manually.
Warranty and Service
This Mozart device can be replaced in full for three years from the date of
purchase in case of damage or malfunction due to manufacturing defects. This
Warranty does not cover cosmetic damage or damage from accident, neglect,
misuse, alteration, or abnormal conditions of operation or handling. Mozart
Technologies or any of its licensors are not liable for any special,
incidental, consequential or
indirect damages or losses arising from any cause.
Resellers are not authorized to extend any other warranty on Wozart’s behalf.
Service for all Wozart products will be provided for the device life time. To
obtain service, contact the nearest authorized reseller or Wozart Technologies
Private Limited.
Thank You
Mozart Technologies Private Limited