WOZART WSC01 Switch Controller Installation Guide
- June 4, 2024
- WOZART
Table of Contents
Installation guide Version 1.0
Mozart Switch Controller 5N
Welcome
This Guide will walk you through the installation of the Wozart Switch
Controller.
We hope you enjoy your purchase. We at Mozart have carefully crafted a
reliable, durable, and secure Smart Home product. We promise to toil harder to
build awesome devices that make life simpler and the planet more livable. We
hope our association continues and grows stronger with each passing day.
You are awesome for supporting the change we wish to bring into the way people
live.
For the configuration video, scan the QR code below
|
---|---
https://www.youtube.com/watch?v=Apmm6I0uc2I|
https://www.youtube.com/watch?v=4FzByU5cs8I
As the Mozart app is frequently updated, there may be changes to this manual.
Please refer to www.wozart.com/support for
the latest version of the manual.
Download the Mozart app from the Google play store or App store.
What’s in the box
| Wozart Switch Controller
---|---
| Switch connector
| Warranty Card
| Setup Code Sticker
Description
Wozart Switch Controller is a smart device that turns electrical appliances or circuits on and off. The device fits behind your standard wall switchboard and can be controlled either using voice commands or app interfaces on smart controller devices or through physical switches.
Technical Specifications
| Power Supply | 100-240 V ~ 50/60 Hz |
|---|---|
| Number of Loads | 5 |
| Compa tible load types | Resistive & Inductive |
| Operating Temperature | 0-40°C |
| Ambient Humidity | 0- 95 % RH without condensation |
| Communication Protocol | Wi-Fi 2.4 GHz 802.11 |
Dimensions
(HeightWidthDepth)| 85 mm 58 mm 20.5 mm
Weight| 104 Gms
Model| WSC01
Load Connection| Supported load types| 220-240 V AC
---|---|---
L1| Resistive & inductive| Maximum 200 W
L2
L3
L4| Resistive & inductive| Maximum 1000 W
L5
Precautions
-
Make sure that only switch connector wires (thin wires) coming out of the Wozart Switch Controller are connected to manual switches.
**No electrical wires are to be connected to physical switches -
The device is designed to control electrical devices operating on AC voltage, faulty connection or use may result in fire or electric shock.
-
Do not power the device before full installation and assembling it in the switchboard.
-
Do not handle the device with wet or moist hands.
-
Do not modify or alter the device in any way not included in this manual.
-
Do not use in damp or wet locations, near the shower, swimming pool, sink, or anywhere else where water or moisture is present.
-
Always use the same power source for devices and loads.
-
Do not connect appliances that are not to the specification mentioned in this document.
-
If you do not have basic electrical wiring knowledge, please get the help of an electrician or contact us.
Setup Guide
N Terminal for Neutral Wire
P Terminal for Live Wire
Switch Connector slot
L1 Terminal for 1st appliance
L2 Terminal for 2nd appliance
L3 Terminal for 3rd appliance
L4 Terminal for 4th appliance
L5 Terminal for 5th appliance
Load connections Switch off the main power supply
- Connect the neutral wire behind the switchboard to terminal N of the Wozart Switch Controller.
- Connect live wire behind switchboard to terminal P of Wozart Switch Controller.
- Connect appliances or lights as loads to terminals L1, L2, L3, L4, and L5 .
Switch connections
-
Plug the switch connector provided in the box into the switch socket of the Wozart Switch Controller.
-
Following are the colors of the wires that have to be connected to the physical switches and the respective loads they control.
-
Verify the connections and assemble the device inside the switchboard.
-
Turn on the main power supply to the device and proceed with configuration on the app.
Troubleshooting
The device isn’t responding
a) Check if the Wi-Fi router is functioning properly.
b) Reconnect your smart controller device
eg: Phone to the Wi-Fi network to which the Wozart device is connected.
c) Switch off the main power supply of the room that has the device for 5
seconds and then switch it back ON.
d) Do a factory reset as explained below and reconnect the device.
Normal Reset
Switch off the main power supply of the room that has the Wozart device to be
reset or toggle the switch connected to slot L1 eight times.
Factory Reset
Toggle the switch connected to slot L2 of the switch controller eight times
continuously then you hear a buzzing sound.
Note: If a factory reset is done all your customization is lost. Do it
only if required.
Not able to scan the QR sticker as it is damaged.
Use the Spare QR Sticker provided in the Wozart Switch Controller box or enter
the code manually.
Warranty and Service
This Mozart product can be replaced in full for three years from the date of
purchase in case of damage or malfunction due to manufacturing defects. This
Warranty does not cover cosmetic damage or damage from accident, neglect,
misuse, alteration or abnormal conditions of operation or handling. Mozart
Technologies or any of it licensors are not liable for any special,
incidental, consequential, or indirect damages or losses arising from any
cause.
Resellers are not authorized to extend any other warranty on Wozart’s behalf.
Service for all Wozart products will be provided for the device lifetime. To
obtain service, contact the nearest authorized Wozart reseller or Wozart
Technologies Private Limited.
Thank You
Wozart Technologies Private Limited