savio SHADOW X1 Professional Gaming PC Case User Manual
- June 6, 2024
- Savio
Table of Contents
SHADOW X1 professional gaming pc case
User Manual
- Remove 4 screws from both sides of the panels.
- Slide two panels 2cm backward and put them away from the case.
Place the power supply incorrect location, then secure it with screws. Pay attention to the PSU fan should be facing towards down.
Insert the SSD or HDD discs in the right places (presented in the pictures) and secure them with screws.
Reload ATX/EPS cable through proper holes in a PC case.
In case of having an ATX motherboard, you need to assembly additional M / B standoff in proper places in PC case.
-
Place the motherboard cover in the PC case.
-
Place the motherboard in the standoff.
-
Secure the motherboard by screw.
-
Plug the EPS and ATX cables in the proper socket into the motherboard.
-
Uninstall the expansion card cover.
-
If it is necessary remove some PCI-E slot cover.
-
Insert GPU card into the PCI-E slot.
-
Secure the GPU card with screws.
-
Plug the PSU connector into the GPU socket
-
Install the expansion card cover.
I/O panel is equipped with USB ports, audio and microphone for these parts
proper work connect the cable
incorrect place on the motherboard.
- The screws for additional fans are not included in the mounting set.
- The VGA holder is not included in the mounting set.
- Do not cover vent holes that are located into the top, rear, front, and bottom of the PC case.
LET’S PLAY 2GETHER
Thank you for choosing our product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.
pl, on social media or on the website of the store where you made the
purchase.
If you want to show off our device on Savio.net.pl FanPage on Facebook, we
will be very pleased.
If there is something that we could improve on our products, please write to
us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
Warranty:
The warranty covers a period of 24 months. Independent repairs and
modifications result in automatic loss of the warranty.
The warranty card is also available for download on our website:
www.savio.net.pl/en/service
The product meets the requirements
Information for customers and contractors and communication regarding
complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp.
z o.o., with its registered seat at ul. Morga 81; 35-323 Rzeszów becomes the
Administrator of your personal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to SODO, Elmak Sp. z o.o., ul.
Morga 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at
+48 (17) 854 98 14. Your personal data will be processed in order to perform
the contract, in accordance with Article 6(1)(b) of the aforementioned
regulation,
to the extent resulting from tax laws and financial regulations. Recipients of
your personal data include entities authorized by legal regulations to obtain
personal data as well as processing entities providing services to Elmak Sp. z
o.o. Your personal data will be stored on the basis of the Administrator’s
legitimate interest. You have the right to access your data, and the right to
rectify, delete or limit the processing of your data. You have the right to
lodge a complaint to the supervisory body if you believe that the processing
violates the GDPR. The provision of personal data is voluntary, however, a
failure to provide such data may result in a refusal to conclude or in
termination of a contract. Your personal data will not be subjected to
automated decision-making, including the profiling referred to in Article 22
section 1 and 4 of the GDPR of April 27, 2016.
Producent/Producer:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszow, Poland
facebook.com/savio.net.pl
www.savio.net.pl
www.saviogaming.com