SCHIIT LOKI MINI+ Owner’s Manual
- June 6, 2024
- SCHIIT
Table of Contents
LOKI+ MINI
HIGH FIDELITY TONE CONTROL
IN NORSE MYTHOLOGY, LOKI IS THE TRICKSTER GOD.
LIKE THE TRICK OF IMPROVING IMPERFECT AUDIO SYSTEMS.
BECAUSE LET’S FACE IT: NO TRANSDUCER OR RECORDING IS PERFECT.
AND YOU MIGHT HAVE YOUR OWN IDEAS ABOUT SONIC PERFECTION.
ENJOY LOKI MINI+, THE HIGH-FIDELITY TONE CONTROL
OWNER’S MANUAL
GETTING CONNECTED
Where to put Loki Mini+?
You can connect Loki either in-between your source and preamp (if you have a
single source) or between the preamp and power amp (so it can be used with all
sources.)
1 Input Jacks. Connect your source or preamp to Loki’s “IN” RCA jacks
with high-quality RCA cables. Or you can use crappy cables (but why?)
2. Output Jacks. Connect the “OUT” RCA jacks to your preamp or power
amp, again with good cables.
3 Power Input. Connect the supplied wall-wart cable to the jack labeled
“16VAC.” Do not use any other wall-wart, or bad things might happen.
4 Power Switch. Turn on the switch. The protection relay will mute the
output for 8-10 seconds, then it will engage with a click.
OPERATION
1 Bass Adjustment. (20Hz) Turning the knob clockwise increases bass,
turning it counter-clockwise decreases bass. Like all the adjustments on Loki,
it has a gradual effect when first turned off of the center position, for
subtle adjustments.
2 Midbass Adjustment. (400Hz) As before, clockwise increases, counter-
clockwise decreases.
3 Midrange Adjustment. (2kHz) You’ve got the clockwise/counterclockwise
thing now, right?
4 Treble Adjustment (8kHz). Clockwise = more, counterclockwise = less.
5 Bypass. Up = tone control active, down = completely bypassed (only a
relay and resistor in the signal path.)
Note : when Loki Mini+ is turned off it is technically bypassed, but the
unpowered input may cause distortion in some systems. Best to turn it on and
switch it to bypass the ASSEMBLED IN USA tone controls.
2-YEAR LIMITED WARRANTY
Schiit Audio warrants to the original purchaser that this product shall be
free from defects in material and workmanship for two (2) years from the date
of purchase. If a defect covered by this warranty occurs during this period,
Schiit Audio will repair the defective product, free of charge. The date of
purchase will be based on customer receipts, otherwise, the date of
manufacturing will be used.
If you believe you need warranty service, contact us first. Schiit Audio
products sent back to us without a Return Authorization (RA) will be returned
to the sender without repair. To contact us and obtain an RA, email
info@schiit.com.
Warranty Limitations. This warranty shall not apply if a product: (a) is
modified or tampered with; (b) is damaged by negligence, accident,
unreasonably use, or other causes unrelated to defective materials or
workmanship, or (c) has had the serial number altered or removed.
Any implied warranties, including warranties of merchantability and fitness
for a particular purpose, are hereby limited in duration to the warranty
period of 2 years. In no event shall Schiit Audio be liable for consequential
or incidental damages resulting from the breach of any implied or expressed
warranties. Some states do not allow these limitations, so they may not apply
to you. You may also have other rights which vary from state to state or
province to province.
IN THE BOX
(1) Loki Mini+
(1) Wall-Wart
(0) Stick-On Feet (they’re pressed in)
Application for Council Directives 72/23/EEC Conformity declared for EN60065,
EN50082-1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>