Eibach E30-82-073-01-02 Pro-Lift-Kit Springs Kit Instruction Manual
- October 27, 2023
- Eibach
Table of Contents
Eibach E30-82-073-01-02 Pro-Lift-Kit Springs Kit
Note:
The Pro Truck Leveling springs must not be used with the OE shocks. Extended
travel shocks are required to avoid damage to the suspension.
PRODUCT INFORMATION
Kit Contents | Description | Part Number | Qty |
---|---|---|---|
Rear Spring | F31-82-073-01-RA | 2 | |
Information Kit | EPAK | 1 | |
Instructions | E30-82-073-01-02INST | 1 |
INSTALLATION INSTRUCTION
NOTES:
Read All Instructions Before Beginning Installation.
- Only qualified mechanics experienced in the installation and removal of suspension components should perform this installation.
- The use of a hoist is highly recommended and will substantially reduce installation time.
- Never work on or under a vehicle unless it is properly supported by safety stands and the wheels are blocked.
- Never use impact wrenches or impact guns to install or remove shock absorber piston components, shafts, and piston rod nuts.
- PRO-LIFT springs should be installed with the Eibach Logo right side up. All original stock spring isolators, dampers, and tubing should be retained from the stock springs and used when installing the PRO-LIFT Springs.
- After installation, it is always important to inspect and adjust the following if necessary:
- Wheel alignment such as camber, caster & toe
- Tire and/or wheel fender clearance, when aftermarket tires and wheels are used.
- Brake line clearance and attachments
- Brake anti-locking and anti-skid system sensors
- Tire Rotation: In order to increase the life of your tires, it is recommended to rotate your tires every 3,000 miles.
- For MacPherson Strut-type front suspension, it is important to mark the orientation of the upper perch with respect to the lower perch before disassembly. This orientation must remain the same with the installation of the Pro Kit springs. Noise may result if this procedure is not performed correctly.
PARTS
Additional Eibach Components Available For Your Truck
Eibach Kits | Part Number | Description | Front | Rear |
---|---|---|---|---|
Pro Truck Sport Leveling front dampers | E60-82-008-02-10 | Off-Road | ||
Performance | +0-2.5” | N/A | ||
Pro Truck Sport Leveling rear dampers | E60-82-008-02-01 | Off-Road | ||
Performance | N/A | N/A |
Eibach Springs, Inc. 264 Mariah Circle Corona, California 92879-1751 USA Tech Support 800-222-8811 Ext 114.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>