ELRO Wireless Doorbell Kit User Manual
- June 6, 2024
- ELRO
Table of Contents
ELRO Wireless Doorbell Kit User Manual
Description
Item nr.
| Colour| Doorbell battery| 220-240V AC| Doorbell pieces|
Push button battery
---|---|---|---|---|---
DB3000-P1C1B
| **| 3 x 1,5 AAA| X| 1| 1 x 23A
DB3000-P1C1W| **| 3 x 1,5 AAA| X| 1|
1 x 23A
DB3000-P1C2B
| **| 6 x 1,5 AAA| X| 2| 1 x 23A
DB3000-P1C2W| **| 6 x 1,5 AAA| X| 2|
1 x 23A
DB3000PL-P1C1B
| **| X| V| 1| 1 x 23A
DB3000PL-P1C1W| **| X| V| 1|
1 x 23A
DB3000PL-P1C2B
| **| X| V| 2| 1 x 23A
DB3000PL-P1C2W| **| X| V| 2|
1 x 23A
- Melody selector Pairing and volume button
- Pairing and volume button
- Led indicator
- Sound output
- Battery compartment
- 220-240V AC plug-in model
- Pull out to activate the pushbutton battery
- Push battery replacement
- Screws and plugs mounting
- Mounting choice screws and plugs or double adhesive
PAIRING PUSH BUTTON AND DOORBELL
The pushbutton and doorbell are delivered paired. The push button must be activated (7). Then insert the batteries into the battery model or else insert the plug-in model into an electrical outlet. Ready to use!
- Proceed as follows if the pairing is to be made:
- Press the pairing button (approx. 5 ), the blue led will go on.
- The doorbell will now go into the pairing learning mode (25 ).
- Then press the doorbell push button.
- The doorbell responds with the set melody, the push button is paired.
Remark
- Multiple pushbuttons can be paired.
- The doorbell has an internal memory, after battery change there is no need to be paired.
MELODY SELECTION
- With the melody selector switch (1) you set the melody of your choice.
SET VOLUME
- The volume can be set with the volume knob (2): 100 % | 75 % | 50 % | 25 % | off.
WIPING THE MEMORY OF PAIRED BUTTONS
- Battery models
- Remove 1 x AAA type batteries.
- Press the pairing button.
- While pressing, the button place the battery back, observe correct polarity.
- While pressing, the led will flash and then will remain lit.
- Release the button, the led turns off.
- The memory of all paired buttons is erased
- Plug-in models
- Unplug the doorbell from the wall outlet batteries.
- Press the pairing button
- While pressing, the button place the doorbell back.
- While pressing, the led will flash and then will remain lit.
- Release the button, the led turns off
- The memory of all paired buttons is erased
TROUBLESHOOTING
- The doorbell does not ring
- The doorbell may be out of range of the push
- Change the distance between doorbell and push-button; the range may be affected by local conditions (metal, iron wickerwork, heavy concrete walls).
- The battery of the push-button is empty
- Replace the battery.
- Note the polarity (+ and -).
- If necessary, reconnect the push-button to the
- The doorbell has no power.
- Check the batteries in the doorbell and replace with new batteries if neccessary.
- Check the socket in which the plug-in model is placed.
Specifications
Transmission range
| up to 120 m (in open area)
---|---
Frequency
|
433.92 MHz, 5 mW e.r.p. max.
Rating push button
| IP56
Pairing method|
self-learning function
Pairing capacity
| Maximum of 6 buttons
Ringtones|
52
Push button battery
| 12V-23A
DB3000PL – Plug-in models|
220-240V AC 50-60Hz
DB3000 – Battery models|
3 x 1,5 AAA
Symbols
Recycling and Disposal: The WEEE symbol indicates that this product and its batteries must be disposed of separately from household waste. When this product reaches the end of its service life, take it to a designated waste collection point nearby to ensure safe disposal or recycling. Protect the environment and human health, use natural resources responsibly! DE Recycling und Entsorgung: Das WEEE-Symbol
Read this manual before use and keep it in a safe place for future reference and maintenance
Warranty
Contact Us
ELRO Europe
www.elro.eu
Postbus 9607 – Box E800
1006 GC Amsterdam – The Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>