ASRock NUC 1100 BOX Series Tiger Lake UP3 Compact Mini PC User Manual

June 6, 2024
ASRock

ASRock NUC 1100 BOX Series Tiger Lake UP3 Compact Mini PC User Manual
ASRock NUC 1100 BOX Series Tiger Lake UP3 Compact Mini
PC

Safety & Regulatory Information

Failure to use the included Power Adapter may violate regulatory compliance and may expose the user to safety hazards.

Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used Batteries must be in accordance with local environmental regulations.

Package Contents

  • NUC 1100 BOX Series
    Package Contents
    The barebone system does not include memory, hard drive and M.2 SSD.

  • 19V/90W Power Adapter

Power Cord (by request)

  • M.2 Screw

Bracket for M.2 2280 support

  • VESA Mount Bracket & Screw Package
    Package Contents

  • Quick Installation Guide
    Package Contents

Product Overview

Product Overview

To use DisplayPort as a display output, please connect your monitor/display to HDMI Port when installing OS system.
This DisplayPort only supports DP to HDMI dongle and DP to DVI dongle, and does not support DP to D-Sub dongle.

SO-DIMM Slots

How to Install the Memory Modules (DDR4)

  1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
    Installation Instructions

  2. Push down until the modules snap into place.
    Installation Instructions

Note:

  • The NUC 1100 BOX Series requires DDR4 SO-DIMM.
  • For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 SO-DIMM pairs.

WiFi Module

How to Install the WiFi Module (Optional)

  1. Locate the WiFi Module slot on the motherboard.
    Installation Instructions

  2. Carefully insert the WiFi Module into the slot.
    Installation Instructions

  3. Tighten the screw to secure the WiFi Module to the motherboard.
    Installation Instructions

Bracket

How to Remove the M.2 SSD (Type 2280) and the Bracket

  1. Release the screw and carefully remove the M.2 SSD (Type 2280).
    Removing Instructions

  2. Release the screw and remove the bracket from the motherboard.
    Removing Instructions

M.2 SSD

How to Install the M.2 SSD (Type 2260)

  1. Locate the M.2 slot on the motherboard. Install the standoff.
    Installation Instructions

  2. Carefully insert the M.2 SSD into the slot.
    Installation Instructions

  3. Tighten the screw to secure the M.2 SSD to the motherboard.
    Installation Instructions

2.5-inch Hard Drive

How to Install the Hard Drive

VIDEO TUTORIAL
Scan the QR code to watch the step-by-step video tutorial on how to install the hard disk drive on the NUC 1100 BOX Series.
QR Code

  1. Remove the four screws on the bottom case. Then lift up and remove the bottom panel.
    Installation Instructions

  2. Attach the HDD to the hard drive mounting bracket and secure it using the four screws.
    Installation Instructions

  3. Connect the SATA Data and Power Cable to the HDD.
    Installation Instructions

  4. Attach the HDD assembly to the bottom panel and secure it using the four screws.
    Installation Instructions

  5. Connect the SATA Cable to the connector.
    Installation Instructions

  6. Then reinstall the bottom panel.
    Installation Instructions

How to Install the VESA Bracket

  1. Attach the two screws to the base of the NUC 1100 BOX Series.
    Installation Instructions

  2. Attach the VESA Bracket to the rear of a compatible display using the four screws. Choose mounting holes depending on the mounting hole pattern of your LCD screen (75 mm × 75 mm or 100 mm × 100 mm).
    Installation Instructions

  3. Mount the NUC 1100 BOX Series by sliding it into place.
    Installation Instructions

Positions of the NUC 1100 BOX Series

The NUC 1100 BOX Series can be placed in vertical or horizontal position.

  • Horizontal Position
    Positions

  • Vertical Position
    Positions

  • VESA-mounted
    Positions

Please note that keeping the NUC 1100 BOX Series in a vertical position will ensure better cooling performance.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Warranty Term

  • Warranty of host of NUC 1100 BOX Series super m icrocomputer (casing excluded): 1 year
  • Warranty of transformer (including the plug) and wireless module: 1 year
  • Our warranty does not cover the casing of the product, the CD drive, the metal frame and fastenings and screws, or packaging accessories.
  • Data stored in the product may be lost as a result of the repair work or re-formatting of the hard drive disk. We does not provide data recovery services or data storage. Please back up your data regularly to protect the data and avoid loss. For details of our warranty terms, please refer to the individual warranty statement applicable to the district where your product was bought.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals